The 6G-SDI Extender over Fiber Optic is a unique solution from MuxLab for extending SDI cameras or other SDI sources in up to 4K resolutions. This product allows for versatile combinations of sources, such as one 6G-SDI source, two 3G-SDI sources, or four HDSDI sources.

• Accepts up to four HD-SDI feeds, two 3G-SDI feeds or one 6G-SDI feed
• Supports all 6G channel configurations (1, 2, or 4 BNC)
• Automatic SDI Link recognition and configuration
• USB interface for diagnostics and field upgradable firmware
• Standard SFP+ module for optical fiber interface, or other media
• Heavy duty aluminum casing
• Supports RS232 pass-through

Related Questions and Answers

Q: 1. Does it output both SDI and HDMI simultaneously?

A: Yes it does.

Q: 2. Has anyone connected the converted SDI-HDMI to a HDMI distributor and has had it work without issues? If so, what distributor did you use?

A: SORRY, I DONT NOW

Q: 3. Can this downscale 4k DCI (through 6G SDI) into 1080p (through HDMI)? It says it can downscale UHD (3840x2160), but can it also do 4K DCI (4096x2160)?

A: Yes, it will do that but the max frame rate for DCI 4K is 24p. Max UHD is 30p.

Q: 4. Is this compatible with Mac OS 10.10.5?

A: The setup program has a minimum requirement of 10.12 but some of these applications will work on earlier OS versions. You could test this by downloading the app and seeing if it will install. That said, you only need to install the app if you are going to update firmware on the device.

Q: 5. Is the 12V DC plug in on the unit 5.5mm outer and 2.5mm inner OR 5.5mm outer and 2.1mm inner? Thanks

A: The included 12V Universal Power Supply's plug is a 1 x 4-pin XLR port for external power or battery use. Pin 1 = Ground and Pin 4 = +12 V.

Q: 6. Will this work with the HDMI 4k output from the Sony FS7? How long will the output signal travel via SDI before it breaks down?

A: Yes it will work. I have about 125ft of sdi Cable running to a switcher it works fine.

Q: 7. Can I use this converter with the HDMI connection of my Macbook Pro? Will I be limited to mirroring my own display or can I use that converter to stream a second SDI monitor?

A: I have done both from my MacBook. I also needed a usb-c to hdmi cable since my MacBook didn’t have an hdmi port, but it worked well.

Q: 8. Has anyone tried this model with a GoPro to TriCaster?

A: I have used this model on many routers and monitors and never had any issue with the conversion to SDI.

Q: 9. can i use this converter from an hdmi viewfinder to sdi or the hdmi should be coming directly from the camera or the original source and not a loupe through??

A: Normally, you send the video out from the camera to the viewfinder, loop though the viewfinder to a transmitter or another monitor. If your monitor hasn't a loop through, you will have to get a signal splitter. If your camera and monitor have incompatible video connections, you can use the following devices to conveniently convert the signals.

Q: 10. is the 12V+ input accept a 2.1mm or 2.5mm jack?

A: The standard power supply is a +12 volt 0.84A universal power supply. The contact sleeve is 5.5mm in dia. and a sleeve length of 9.3mm with a 2.5mm jack.