The m!ka XL Aluminum Monitor Arm from Yellowtec is a two-section articulating arm featuring a length of 27.5" from end to end. It supports up to 22 lb monitors via a 75/100mm VESA mount component, called QuickFix, integrated on one end. The other end can be attached on m!ka system poles (desk-mount) or wall mount poles, sold separately.

The QuickFix VESA mount component features a swivel-head that allows for a 105° horizontal adjustment range. The swivel-head is friction-adjustable so you can securely tighten the arm into a fixed position. The QuickFix component also offers quick-release functionality, allowing for one-step attachment/removal of the arm. Vertical adjustment is possible along the system/wall mount poles after loosening two butterfly handscrews.

The MMS Monitor Arm XL is made of robust, polished aluminum and comes with two cable clips for cable management. This arm is fully compatible with the m!ka MMS modular system.

27.5" Two-Section Articulating Arm    Supports Monitors up to 22 lb    75/100mm VESA Mount    Attach on Desk Mount or Wall Mount Poles    Friction Adjustable Swivel-Head    105° Horizontal Adjustment Range    Quick-Release Attachment/Removal    Two Cable Management Clips Included    Aluminum Construction    Compatible with m!ka MMS Modular System

• 27.5" two-section articulating monitor arm

• Supports up to 22 lb monitors via a 75/100mm VESA mount

• Use attached on m!ka desk-mount system poles or wall mount poles

• Friction adjustable swivel-head allows for a 105° horizontal adjustment range

• Quick-release attachment/removal

• Two cable management clips included

• Robust, polished aluminum construction

Related Questions and Answers

Q: 1. Is the baby pin welded on top? I want to find a stronger handheld boom than the Sunswatter "Heavy Duty" boom, over time the baby pin loosens up.

A: According to the manufacturer, the 5/8" baby pin stud on the end of the Kupo Baby Handheld Boom Arm (Aluminum) is tight fitted into the tube and fixed with crossed pins instead of a single pin. Basically, the baby pin would not loosen if you stay below the maximum payload listing of 7.94 lb (3.6 kg).

Q: 2. Does it work with the Godox ad400 pro?

A: Yes. As the MagMod XL Two Strobe Bundle uses the Bowens S-mount to connect the reflector to stobe light fixtures, this bundle may be used on the Godox AD400Pro Witstro All-in-One Outdoor Flash via the Bowens Mount Adapter Ring included with the strobe's purchase.

Q: 3. Will this directly fit the Godox AD300 Pro with any adaptor?

A: The MagMod Godox Mount for Reflector XL fits directly onto the AD300pro so it can use the MagMod Reflector XL.

Q: 4. Can this bracket be used with other 700 series SmallHD monitors? Namely a 702

A: You can use this with the SmallHD 702. This arm offers a 1/4"-20 screw for mounting and the SmallHD 702 offers a 1/4"-20 thread on the sides of the monitor.

Q: 5. Can this Godox mount itself be used for the magsphere XL? Thanks.

A: The MagMod Godox Mount for Reflector XL is only the mount adapter, it does not have extra magnets to support the MagMod MagSphere 2.

Q: 6. is this compatible with Elinchrom One and Three?

A: The MagMod Profoto Mount for Reflector XL BH #MAXPRFMT01 is compatible with the Elinchrom One and Three models.

Q: 7. Is there any back pack can fit the system when not using it

A: There was a three bag system available. At this time we suggest this all in one bag. Porta Brace RIG-4SRKOR Wheeled Rig and Camera Case with Interior Kit B&H # PORIG4SRKOR.

Q: 8. Does this work with the Good AD400?

A: The MagMod XL Professional Strobe Kit will work with the Godox ad400 strobe.

Q: 9. Can the Leica Drop XL unit charge a Q3 camera without the HG-DC1 handgrip attached?

A: No, you need Leica HG-DC1 Wireless Charging Handgrip to charge the Q3 wirelessly.

Q: 10. Does this arm have a 1/4" screw hole in the base?

A: no this does not have a 1/4-20 female thread on the bottom