The Camplex opticalCON MTP Elite Male to 12 fiber SC field deployable tactical singlemode breakout cable with OFNP plenum rated jacket ensures low insertion loss and high performance for permanent installations. The MTP Elite connector is broken out to 12 standard SC fibers via a 10 ft fan out making it ideal for field applications requiring multiple signal paths such as video, audio, data, and other fiber converters.
Use in conjunction with Camplex trunk cables, Neutrik opticalCON MTP chassis connectors NO12FDW-A, and Camplex breakout boxes for durability and high performance.

• Low insertion loss and optimized optical return loss values
• Designed for permanent internal breakout installations
• Neutrik opticalCON MTP connectors- lockable & waterproof caps with hinged dust covers
• SC breakout connectors
• Singlemode
• Made and tested in the USA

Related Questions and Answers

Q: 1. Hi! I have TalentCell Rechargeable Lithium Ion 12V Power Bank batteries and Hirose cable connector. Is it possible to power the equipment that way? Will the Phantom Power of all tracks work? And all system functions? Thanks!

A: Hello Eisejuaz. The MixPre-10 II requires 10 to 18 volts of power at the hirose power port, so your 12-volt power bank should work perfectly. The MixPre-10 II should operate normally on 12 volts.

Q: 2. am I crazy or does this device shut off all mic inputs other than 1-4 in ambisonic mode? this would mean while using the ambeo i cannot plug in any other microphones?

A: That is correct, only channels 1-4 can be operated for ambisonic recording .

Q: 3. It is possible to power it with a dtap battery and a herose adapter?

A: Hi Dario. Sure, you can power the MixPre-10 II with a dtap battery w/hirose connector. Just make sure voltage from the battery is 10 - 18 volts.

Q: 4. Can anyone recommend a wireless system to send audio from the balanced MixPre outputs to a BMPCC 6k Pro?

A: To send audio wirelessly from the balanced outputs on the Sound Devices MixPre-10 II Multitrack Recorder to a Blackmagic Design Pocket Cinema Camera 6K Pro, you can use the Remote Audio Unbalanced Adapter Cable TA3F to 3.5mm Locking TRS for Sennheiser Transmitters (B&H # RECASENSK1TL) or the Cable Techniques RX-TRSBL Locking 3.5mm Male to TA3F Receiver Cable (B&H # CARXTRSBL) to connect the TA3 (3-pin mini-XLR) output from the MixPre-10 II to a Sennheiser EW series wireless bodypack transmitter or a similar type of wireless bodypack transmitter. For example, you can use a wireless microphone system like the Sennheiser EW 112P G4 Camera-Mount Wireless Omni Lavalier Microphone System which will accept line level input signal. The Sennheiser system has only one channel, so you will need to purchase two of the Sennheiser systems if you want to send wireless audio from both the left and right outputs on the MixPre-10 II to the BMPCC camera. To connect the output from the wireless receiver to the TA3 input on the camera, you can use the Kondor Blue Mini-XLR Male to Locking 3.5mm Stereo Cable for BMPCC 6K & 4K (B&H # KOMINIPLSBK).

Q: 5. Is it best practice to turn off phantom power before turning off the device in beginner mode? Thank you for your time.

A: You do not have to turn off the phantom power before turning on the MixPre-10 II. It is advisable that you do not have the phantom power turned on when only using dynamic mics, or battery powered mics, as it will consume more battery power from the recorder unnecessarily.

Q: 6. Do I need a buy an external Time Code or the integrated one is good enough?

A: This unit has a built in time code generator, although it will sync if you prefer to use an additional generator.

Q: 7. Do both batteries need to be mounted at the same time? The mixpre does not offer an option for a 7.4 watt power source-only the 14. Can I power with one and select that output? Or is it recommended to utilize both? If I can power with one battery at a time, what power setting do you recommend selecting?

A: I am not seeing an option for both batteries to be used at the same time.

Q: 8. My 744t charges it L-series battery whenever its plugged into power from the hirose input. My question: Does the MixPre 10T charge the L-series batteries while being powered by the hirose cable?

A: No, the MixPre-10T does not have the ability to charge L-series batteries when the recorder is powered using the Hirose cable.

Q: 9. Can I use the TA3 outputs for IFB?

A: Yes, the Sound Devices MixPre-10 II's TA3 outputs could be used with an IFB system.

Q: 10. Is a V30 SD card good enough for this when recording multiple ISO tracks?

A: The V30 rating on an SD card refers to the video speed class, so it is not a relevant rating for use in an audio device. As long as the memory card is rated for class 10 speed or higher, or U1 speed, it is going to be compatible for use with the Sound Devices MixPre-10 II 10-Channel / 12-Track Multitrack 32-Bit Field Recorder.