The Auray LTS-ST Tripod Base Laptop Stand is a sturdy, versatile, and stable support for a laptop or device weighing up to 45 pounds. It is an ideal accessory for live or studio music production, video production, lectures, classroom, or any application where a laptop or other device needs to be close at hand.

The stand's all-metal construction and extra-wide tubing provides strength and stability. The telescoping shaft can be easily adjusted between 29 and 47 inches. Large, ergonomic locking knobs secure the stand in position. The stand is designed with raised edges for additional security, and a strip of protective foam to prevent scratches.

The base spread can be adjusted to conform to your space requirements. The stand folds up and can be easily moved to wherever you need to place your laptop or device.

Supports Laptops & Devices Up to 45 lb    All-Metal with Extra-Wide Tubing    Telescoping Shaft Adjustable from 29-47"    Metal Platform with Padded Raised Edges    Large Locking Knobs Provide Secure Hold

The LTS-ST is capable of supporting a laptop computer or device weighing up to 45 lb

All-metal construction with extra-wide tubing assures stability and strength for continuing use

The telescoping shaft can be adjusted from 29" to 47" and will allow you to easily operate your laptop or device whether you are sitting or standing

The sturdy metal platform features raised edges for added security for your laptop and foam padded strips to prevent scratches to your device

Large ergonomic locking knobs provide a secure hold and keep the stand firmly in position

Related Questions and Answers

Q: 1. Can this stand support the auray RF-5P-B Reflection Filter (Witch weighs 9.5 pounds)?

A: The RFMS-580 is designed specifically to support heavier reflection filters and can support the weight of the Auray RF-RP-B filter and other similar reflection filters.

Q: 2. What is the range of heights for this stand, with the legs unfolded? It says up to 8.5 , but what's the lowest it will go? Obviously the telescoping portion can't go below where the legs go down to.

A: 7-1/2 - 10

Q: 3. Can I attach lyx pro vri-20 sound absorbing panel to this mic stand?

A: The stand features a 5/8" threaded adapter for attaching a shockmount or mic clip. The VRI-20 does not specify its mount type but it should work with just about any microphone stand. (May require 3/8" thread adapter to work with a speaker stand) Auray AD-5838-B 5/8"-27 Female to 3/8"-16 Male Mic Stand Adapter B&H # AUAD5838B: https://bhpho.to/3cYuzkL 5/8"-27 Female to 3/8"-16 Male Thread Adds Functionality to Your Mic Stand Provides Compatibility with Mic Clips Provides Compatibility with Shockmounts Offers Compatibility with European Clips Knurled Edge for Easy Connections

Q: 4. What is the spread of the legs when fully open compared to to a run-of-the-mill mic stand?

A: The Auray RFMS-580 stand has a footprint of approximately 24" when the legs are fully open.

Q: 5. what is the max and min height of the stand?

A: Min = 32 and Max = 52

Q: 6. Can this stand hold a Warm Audio WA-87 r2 with an Auray Iso Armor 2 without the stand or mic leaning?

A: Yes, the Auray RFMS-580 Reflection Filter Tripod Mic Stand can securely support the Warm Audio WA-87 R2 Large-Diaphragm Multipattern Condenser Microphone and the Auray ISO-ARMOR-2 Microphone Isolation Chamber.

Q: 7. will this work with a Blue Yeti? would I need any adapter?

A: Yes, you can mount the Blue Yeti microphone on the Auray RFMS-580 tripod stand. The Yeti has a standard 5/8" mounting thread on the bottom which can be attached to microphone standard or broadcast arm. To keep the mic isolated from noise and vibrations, the manufacturer recommends using the Blue Radius III Shockmount (B&H# BLRADIUS3) to mount the Yeti first, then attaching the shockmount to a mic stand or broadcast arm.

Q: 8. Can this support the MXL RF-100 Reflection Filter?

A: Yes, the Auray RFMS-580 Tripod Stand can be used to support the MXL RF-100 Reflection Filter.

Q: 9. Do you ever have find the stand spinning when you don't want it to be, or does it stay put?

A: No, this item features a friction based nob adjustment system. So when you set the item it will stay in place.

Q: 10. How long are the legs of the tripod?

A: The tripod legs are approximately 18-inches long.