You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Laird Digital Cinema Belden Mini Rg59 1855a Cable With Neutrik Reartwist Bnc Connectors (3')

Laird Digital Cinema Belden Mini Rg59 1855a Cable With Neutrik Reartwist Bnc Connectors (3')
  • Product Code: ga178074
  • Availability: In Stock

$74.85 $101.05

The 3' Belden Mini RG59 1855A Cable with Neutrik rearTWIST BNC from Laird is built for extended bandwidth for 6G-2K video applications. Neutrik's rearTWIST BNC connectors offer increased headroom and additional return loss reserve for potential impedance deviations resulting from cable bending, incorrect connector assembly, or faulty connection interfaces without signal interruption. The rearTWIST technology simplifies insertion and removal of recessed BNC panel connectors and enables easy patch bay interfacing. No special BNC removal tool is required, simply use the rear boot twist.

Belden 23 AWG RG59 1855A Mini Coax Cable    2 x Neutrik rearTWIST UHD BNC Connectors    Supports up to 6G-SDI/2K Signals    75 Ohms, 3' Cable Length    For Recessed Panel-Mount BNC Connections    Easy rear-Twist Insertion/Removal

Parameters
Connector 11x BNC Male
Connector 21x BNC Male
Coaxial TypeRG-59 (1855A)
Cable Length3' / 91.4 cm
Interface6G-SDI
SMPTE StandardsNot Specified by Manufacturer
Jacket TypePolyvinyl Chloride (PVC)
ShieldedYes
Wire Gauge23 AWG
Packaging Info
Package Weight0.145 lb
Box Dimensions (LxWxH)3.15 x 2.3 x 0.45"

Belden RG59 1855A mini coaxial cable with a 23 AWG

Related Questions and Answers

Q: 1. Will this work with fujifilm x s10?

A: Yes, the Vello 2.5mm Remote Shutter Release Cable II for Canon Sub-Mini Cameras is compatible on the Fujifilm X-s10.

Q: 2. 1. Can I connect this camera to zoom and focus control for TV Studio production? 2. Can I connect this camera to CCU

A: Yes with a supported lens and supporting ATEM switcher. This can be done with the ATEM software or you can add the optional Camera Control Panel.

Q: 3. Hi there, this black magic G2 can support Sony e mount lens?

A: No, not natively. You could always get a Metabones Speedbooster to adapt to E-mount, but I don't know that I would necessarily recommend it. If you only have E-mount lenses, I'd grab a Speedbooster and maybe rent a G2 to see if it works for you. If you have plenty of EF glass, then I would just know that you can't use your Sony glass with this camera. You will have some additional softness with a Speedbooster, especially at more open aperture/iris. You could also buy an additional URSA lens mount in either PL, F, or B4 mounts.

Q: 4. It does not come with a battery plate attached to the back? Do I have to buy it separately? And which would you recommend?

A: That is correct, batteries along with a battery plate are not included. B&H # BLUMPROVMNT is a great kit from IndiPro Tools that comes with two 98Wh Micro Batteries, V-Mount Plate and a Charger. https://bhpho.to/2TsfJYg

Q: 5. Not sure if I understand the specs right. Is ISO 3200 the maximum this camera is capable of?

A: That is correct. The ISO goes up to 3200.

Q: 6. I am interested in using the FXLION Nano batteries with this camera body. I noticed they were not recommended under "accessories" on this page. Are these batteries compatible with the URSA Mini Pro 4.6K G2?

A: The Fxlion NANO ONE batteries are compatible with the URSA Mini Pro 4.6K G2 because they output a standard 14.8V.

Q: 7. Two cables are included. Does one of the cables have a 2.5mm tip and the other end, of the same cable, have a 3.5mm tip?

A: The Vello 2.5mm Remote Shutter Release Cable II for Cameras with Canon Sub-Mini Connectors has two 2.5mm male ends. The Vello 3.5mm Remote Shutter Release Cable II for Cameras with Canon Sub-Mini Connector has one 2.5mm male tip and one 3.5mm male tip.

Q: 8. does the camera powers the Canon CN-E 18-80mm T4.4 COMPACT-SERVO Cinema Zoom Lens ?

A: Yes, the camera powers that lens.

Q: 9. What is the highest frame rate with no crop?

A: 120fps in 4.6K

Q: 10. Will this work with a canon 80d?

A: Yes the Vello 2.5mm Remote Shutter Release Cable II for Cameras with Canon Sub-Mini Connectors is the correct cable for the Canon 80D camera.

12/09/2024

This is for a larger point and shoot type camera. Perfect size and very comfortable strap.

5
18/06/2024

Got this neck strap along with the sling strap adaptor and wrist strap all by Op-Tech. Makes for a very versitel system. Way better than the OEM neck strap. For walks and longer camera carries switch out two straps and it becomes a sling strap. All three straps use the same quick-release connectors attached to the camera body. Very pleased, highly recommend them.

5
18/05/2024

This lightweight, well-made strap is not only comfortable with its wide neoprene shoulder section, but is also innovative in its attachment system. Instead of split ring attachment to the camera, it has synthetic cord loops with strong, small side-release clips (both males). These attach to narrow nylon webbing straps, which have additional side release clips to attach to the wider neoprene shoulder strap. When not attached to the shoulder strap, the webbing straps can connect to each other forming a smaller loop for an easy grab from a bag without a dangling shoulder strap. Or just the cord loops may be left on the camera for unimpaired tripod use. Clever system, plus it works perfectly with OpTech's battery pouches (not included), which stay put on the neoprene. PS The attachment loops have the same QD side-release clips as the one employed by the OpTech Cam Strap (not included), which easily attaches when only a wrist strap is needed.

5
16/05/2024

Used with a Canon SL1 with a f2.8 28mm IS prime lens. Because of the less than 2 lb. weight, I can also carry OP/Tech wrist strap which has the same connector.

5
22/04/2024

I use this as a stabilizing strap on my micro 4/3rds camera while filming panning video. It is comfortable around my neck and the quick releases are small and unobtrusive when disconnected from the strap.

5
16/04/2024

Really happy with the camera strap, went to a couple big name stores & couldn't find the exact fit... Love online shopping, this is perfect and if you don't need to carry it around your neck. It disconnects easily.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Aoi Port Removal Tool

$67.50 $108.00

Silhouette Punching Tool

$23.37 $29.68

Vigitron Vi00027 Powermate Poe Test Tool

$143.85 $178.37

Platinum Tools 16500c 9" Ergo Crimp Tool

$114.57 $174.15

Platinum Tools 16505c 9" Ergo Crimp Tool

$143.25 $217.74

Platinum Tools Pro-strike Punchdown Tool

$100.92 $155.42

Platinum Tools 16511c 9" Ergo Crimp Tool

$143.25 $196.25

Platinum Tools 16501c 9" Ergo Crimp Tool

$143.25 $194.82

Simply45 5" Premium Flush Cutter Tool

$32.25 $48.70

Products You May Like

Neutrik Scdp-9 Sealing Gasket (white)

$8.19 $13.02

Nisha Rear Cap For Leica R Mount Lens

$35.85 $49.83

Vinten 3724-3 Mitchell Center Screw

$1,710.00 $2,650.50

Rosco V-hazer Fog Fluid (4 Liter)

$252.00 $317.52

Nanuk Lid Organizer For 923 Case

$434.85 $634.88