The 500' Belden Mini RG59 1855A Cable with Neutrik rearTWIST BNC from Laird is built for extended bandwidth for 6G-2K video applications. Neutrik's rearTWIST BNC connectors offer increased headroom and additional return loss reserve for potential impedance deviations resulting from cable bending, incorrect connector assembly, or faulty connection interfaces without signal interruption. The rearTWIST technology simplifies insertion and removal of recessed BNC panel connectors and enables easy patch bay interfacing. No special BNC removal tool is required, simply use the rear boot twist.

Belden 23 AWG RG59 1855A Mini Coax Cable    2 x Neutrik rearTWIST UHD BNC Connectors    Supports up to 6G-SDI/2K Signals    75 Ohms, 500' Cable Length    For Recessed Panel-Mount BNC Connections    Easy rear-Twist Insertion/Removal

Belden RG59 1855A mini coaxial cable with a 23 AWG

Related Questions and Answers

Q: 1. I have an Ursa Mini Pro. Will my BM viewfinder and shoulder mount kit work with the G2?

A: Yes

Q: 2. Will the SSD module for the Mini Pro work with the G2 (read/write speed adjustments with BMRAW 1.3) as well as the battery plates from BM?

A: Yes they should be. The SSD Module and Batter Plates for the previous Ursa Mini Pro Models will be compatible with this new model as well.

Q: 3. If I have a macbook pro with thunderbolt 2, and I use the mac thunderbolt 2 to USB-C converter.. will this device still get power and will it work?

A: According to Atoch you will need to use an Apple Thunderbolt 3 to Thunderbolt 2 adapter and connect this to a Thunderbolt 3 self-powered device like a dock. Then you can plug the TX-1CXQ to the Thunderbolt 3 dock or self-powered device. The reason you need to do this is because the Thunderbolt 2 port doesn’t have enough power to power a Thunderbolt 3 bus powered device.

Q: 4. Does it come with the V-mount plate installed or we have to buy it separately as well just like the previous UMP?

A: A battery plate is not included. B&H # INBMUVP is a V-Mount Battery option that will work well with this camera. https://bhpho.to/2WSuRQP

Q: 5. is there a light meter in this camera with which it is possible to set the aperture of a optic?

A: A electronic optic which is attached by way of a Canon mount of the EF variety has the function which you have described by way of depressing the Auto Exposure button on the not-included handle or by pressing "iris" on the LCD touch screen and setting auto exposure to "iris" However this function is, by in large, useless.

Q: 6. Can you see your menu and settings via the sdi-out to an external monitor?

A: No. The menu is only visible on the LCD display.

Q: 7. Both the c1-25 and the c1-35 list the Fuji XH2s as being compatible. How is this possible?

A: The Vello 2.5mm Remote Shutter Release Cable II for Cameras with Canon Sub-Mini Connectors is the appropriate cable. The Fujifilm X-H2S Mirrorless Camera uses a 2.5mm port for a remote connection. This is easily missed since the port is located on the right side of the camera, rather than the usual left side.

Q: 8. What is the highest frame rate with no crop?

A: 120fps in 4.6K

Q: 9. Hey Friends at B&H. This camera looks like it has huge potential and delivers so much for the price. There is lots of good info here but I still have a few things I’d like to know before buying. Here are my questions: 1) Start up time. From off to ready to record, what is the wait time? 2) The Camera advertises 15 stops of dynamic range. Sounds awesome! Has anyone seen this tested on a xyla chart to confirm? Also is the dynamic range less when the camera is set to some ISO? 3) Has anyone seen rolling shutter tests compared to other CMOS sensors of a similar size (FS7, Alexa, EV1, Gemini?) 4) Has anyone seen test footage of the low light that has technical information about the amount of light the images were recoded in as well as ISO, Stop and shutter angle? Love to see noise comparisons between other cameras in class. 5) Any bugs? Anyone here had the chance to use the camera for 100+ hours? If so any weirdness or unreliability? 6) Is it true that settings / info display cannot be sent though SDI to an external monitor? If anyone has information or links that answer these questions it would be very much appreciated. Alternatively I’s be happy to do the tests if a demo camera can be spared for a few days. :) 7) Last question, BH stock still says coming soon. Anyone know how soon soon is?

A: 1) About 7-8 seconds. 2) The camera does provide 15 stops of dynamic range. 6) You can enable settings/info to be displayed on the SDI outputs via the monitoring settings.

Q: 10. Will this work with fujifilm x s10?

A: Yes, the Vello 2.5mm Remote Shutter Release Cable II for Canon Sub-Mini Cameras is compatible on the Fujifilm X-s10.