The DVI/USB2.0 HDBaseT Extender Kit allows one DVI channel and one USB 2.0 channel to be transmitted over distances of up to 330 ft (100 m) at all resolutions up to 1920 x 1200 via single Cat5e/6 cable, 4K (3840 x 2160) to 230 ft (70 m). The Receiver features a 4-port USB 2.0 hub for transferring of multiple USB 2.0 data transmissions.

• Extends DVI and USB 2.0 via single Cat5e/6 cable
• Up to 330 ft (100 m) at all resolutions up to 1920 x 1200 via one Cat5e/6
• HDBaseT technology
• Supports 4K resolutions up to 230 ft (70 m)

Related Questions and Answers

Q: 1. Will the manfrotto- 234RC tilt head mounted on the manfrotto 681B monopod be suitable for use with Nikon D7100 and the Nikon 200/500,f5.6 zoom??

A: You will want a more durable head, as this tripod head is only rated for 4 pounds of support.

Q: 2. Is the output file an MP4, AVI, PRO RES or what?

A: Recording format in this product is MP4.

Q: 3. I had a Sony 707 with "memory stick" cards. Will this read the SONY memory stick?

A: Yes, the Vidpro 6-Slot All-In-One USB 2.0 Card Reader will be able to read the Sony Memory Stick cards.

Q: 4. Does this Manfrotto 234RC Tilt Head work with SIRUI P-326 6 Section Carbon Fiber Monopod ? Thanks for help

A: G'day Lam, I have a Manfrotto 234RC Tilt Head fitted to a Velbon Elite CP324 carbon fibre monopodand I chose that monopod for its carrying capacity. The tilt head usually supports an 80-400 Nikon lens or an older Tokina 150-500 with a Nikon D200 or D700 on the rear end. It copes with the weight of either combination and locks securely when required or provides firm resistance to allow for tiltingwhen following targets. Hope that is of assistance.Kind regardsGarry

Q: 5. I have an old Cannon dslr camera the has a CF+ microdrive memory card. I purchased another reader that supported cf but the CF+ was too thick to fit in. Will this fit a CF+ card? I can't seem to find anything that references that specific label. Is that the same as a gen1 or gen 2 card difference?

A: This reader will not work with MicroDrive cards.

Q: 6. hello will this head fit on the manfrotto compact aluminum monopod advanced?

A: I do not have that type of monopod, mine is a Gitzo and work's OK. The head does not hold my 1Dii and 400mm very steady, but will hold my 1Dii and 70-200 F4 OK.

Q: 7. What monopod head will support a sigma 150-600 mm lens?

A: The Manfrotto 234RC Tilt Head can support up to 5.5 pounds and the Sigma lens only weighs about 4 pounds. Your camera would probably add more than 1.5 pounds so you might technically exceed the maximum load capacity but this head should still be fine. If you are concerned about exceeding the load capacity, you could consider using a ball head such as this instead: https://bhpho.to/2Jjd7ta

Q: 8. Will this read the large SmartMedia cards?

A: Unfortunately, this reader cannot accommodate SmartMedia Cards.

Q: 9. Does this camera pan tilt zoom? Do I need a controller to do so?

A: Yes, the following item does support PTZ functionality.

Q: 10. What format is the recording?

A: HDMI (4:4:4) 1080p: 60 fps USB Type-A 1080p: 24/25/30 fps 1080i: 50/60 fps 720p: 50/60 fps 576p: 50 fps 480p: 60 fps