The white HDL10-A Active Line Array Module from RCF is designed for use in live sound reinforcement and installed situations. The system is powered from a 1400W peak power two-way digital amplifier (400W for the HF and 1000W for the LF), and sound is processed from a powerful DSP. The system features two 8" low-frequency transducers with a 2" voice coil for a solid bass reproduction, and a large-format 2" compression driver to deliver vocal clarity and high definition. The custom-designed waveguide allows a coverage of 100 x 15°, whilst also delivering linear high-frequency response.

The ND 640 compression driver's 2.5" voice coil allows a crossover point of 800 Hz, which allows a wide vocal range to be produced by this driver. The DSP also includes presets for indoor/outdoor usage and highly curved arrays.

The back-panel controls allow a number of simple optimizations to be carried out: two possible HF settings, four possible cluster configurations, an EQ setting for high-curved configurations, and an Indoor Correction EQ. A volume knob allows to set the overall volume of the speaker, according to its application. This unit provides Power, Signal, and Status LEDs for monitoring the system.

The HDL10-A features configurable mechanic; angles between cabinets are selectable with 2° resolution and allow the system engineer to create J-shaped or spiral arrays. HDL10-A cabinets are molded on a polypropylene composite material designed to dampen-down vibrations, even at maximum volume settings. The module is equipped with two aluminum side handles with a rubber handgrip for portability. The system is equipped with a heavy-duty fly bar. The steel construction mechanics make it possible to fly up to 16 modules in daisy chain manner.

Compact Line Array Element    1400W Peak Power    133 dB Max SPL    65 Hz to 20 kHz Frequency Response    Dual 8" Woofers + 2" Compression Driver    DSP Controlled Input Section    Includes Presets    Tour-Grade Safe and Solid Mechanics    Composite PP Enclosure with Wood Bracing

• Provides up to 1400W of power (700W RMS)
• Two 8" woofers
• One 2" compression driver
• DSP controlled input section with selectable presets
• Tour-grade safe and solid variable mechanics
• Wooden reinforced composite PP enclosure

• Live sound
• Rental
• Portable PA, clubs, ballrooms, and live theatre
• Theme parks
• Music playback and sound reinforcement in small and midsize venues
• Corporate A/V professionals and sound system hire companies

Related Questions and Answers

Q: 1. does it work with one drive only?

A: Yes, if you were to set the RAID configuration to JBOD or SPAN and then removed one of the OWC Mercury Elite Pro Dual 40TB 2-Bay USB 3.2 Gen 2 RAID Array with 3-Port Hub's (2 x 20TB) two induced drives it would work with just one drive installed.

Q: 2. Can this be used to backup a synology nas?

A: As long as the total amount of data can fit on the OWC Mercury Elite Pro Dual 36TB 2-Bay USB 3.2 Gen 2 RAID Array with 3-Port Hub (2 x 18TB), you can use it to backup the data from a NAS.

Q: 3. If I buy 2TB model, then can I change 2TB HDs for HDds with more capacity, 10-16TB?

A: You can swap the drives on the OWC Mercury Elite Pro Dual enclosure.

Q: 4. I am looking for an external storage solution (just like this item) that i can plug into both my windows pc and mac laptop via usb, and just access the unit as a storage drive. Am looking to use it regularly to store my photography library (store all the photos and use adobe softwares using pictures that are on the external unit). Is this the best unit for this, or is a different unit recommended?

A: Ari,I can only speak to this unit. The Qx2 can be moved between platforms if properly configured, but you cannot have them plugged in simultaneously.

Q: 5. I have this drive array with smaller drives and I would like to replace them with larger drives. How would I do that? What specs do I need for the drives? How do I transfer data from the existing drives? How do I install the new drives? Many thanks!

A: You will need to backup the information to an external drive and use any larger capacity SATA III 3.5" Drives. You would use a checksum software which is great to have for large and critical files. This can check every bit of the transfer and provide verification. A checksum software to look into Hedge. Please see the link: https://hedge.video/hedge. One can technically transfer files/folders from the source to the new destination, but it is a nice safety measure to get verification at the end of the transfer. After backing up, install the new drives and build the RAID you want and transfer the data to the new drives. Also check the link below for the drive assembly instructions. https://www.owcdigital.com/assets/products/mercury-elite-pro-dual-thunderbolt/mep-dual-tb-usb-guide.pdf

Q: 6. Are the drives user replaceable? Thanks.

A: Not during the warranty period, it will void the warranty. Physically, yes, you can replace the drives, they are standard 3.5 inch hard drives.

Q: 7. Does this come with a Thunderbolt cable?

A: Yes, the Thunderbolt cable is included, as well as a USB 3.0 cable.

Q: 8. Does this hard drive enclosure come empty or with hard drives enclosed?

A: It comes with 2 x 4.0 TB HGST deskstar NAS hard disk drives.

Q: 9. Can I connect this drive to a new iMac? The USB 3ports on this drive look different than the USB 3 ports on the new iMac.

A: The included cable has the proper connections to plug it into the USB 3.0 ports on the iMac.

Q: 10. will this work with a USB 2?

A: Yes, it will work, though very slowly.