The Lightning to USB Sync & Charge Cable from Kramer connects to your computer's USB port for syncing and charging, or to a USB power adapter for even faster charging from a wall outlet. The Apple MFi certified lightning connector goes in either direction, enabling easier connection of your devices.

Lightning Connector, Male    USB 2.0 Type-A, Male    Sync & Charge Cable    Apple MFi Certified

Related Questions and Answers

Q: 1. Will this cable work with Sony HVL-F60M flash units? It says it is not compatible with Sony flashes. Camera is Sony SLT-A99V body. Having trouble with compatibility issues. Will this work with Pocket Wizard Plus III? Help!!

A: This cable DOES work with my Sony HVL-F60M flash, triggered by either a PocketWizard PlusX or an optical trigger. Flash in manual, of course, and make sure the foot on the flash is fully seated (there is a click when it's all the way in there). Should work fine with your Plus III.

Q: 2. I want to use an opteca IF500 flash off-camera using a Sony A6500. Will this cable do the job?

A: The PocketWizard HSFM3 Flash Sync Cable, is not compatable with "Sony" flash units. If the Pocket Wizard trigger one is using is compatible with the Sony A6500 then the synch cable will "work" and trigger a non-Sony flash unit.

Q: 3. Will the Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male BH #KORSMXM20 also allow you send signal from a timecode generator to your Sony FS7? How are the two cables functionally or anatomically different?

A: While the Kopul and the Camvate cables are basically the same. The Camvate model has a higher quality for Time code use and it would be the suggested cable to work with on the Sony FS7.

Q: 4. will it work woth a 430EX?

A: Yes, it does.

Q: 5. Is it safe to store batteries in this Tri-Charge without USB power supplied? Will they discharge in my camera bag?

A: Yes, it safe to store the batteries inside the Tri-Charge if there is no USB power supply connected. The batteries will discharge as it normally would if it wasn't inside of the Tri-Charge.

Q: 6. How many watts does it pull from the brick for maximum charging speed?

A: Jupio does not the list the wattage for the Jupio Tri-Charge for Sony NP-FZ100. However, they do mention that if you use a PD cable and a PD brick, it will be 9V and 2A (which is 18W).

Q: 7. Is it safe to store batteries in this charger without worrying about self discharge?

A: While it is safe to leave lithium batteries on a charger like the Jupio Tri-Charge for Sony NP-FZ100, the batteries will eventually degrade if charged to 100% for too long without discharging them.

Q: 8. Does this work for the Pavotube II 30C's?

A: The Nanlite Pavotube 3.5mm Sync Cable Connects two Pavotube 15C or 30Cs via hardline to synchronize adjustments and effects., so yes, it will work with Pavotube II 30C. Pavotube 3.5mm Sync Cables can be used to daisy chain up to 10 Pavotube 15C or 30Cs together

Q: 9. How long does it charge one Sony NP-FZ100 battery from 0% to 100% full charge?

A: According to the manufacturer Charging times with standard USB power supply: 800 mA for 1 battery, 500 mA for 2 batteries, 400 mA for 3 batteries. This will result in charging time of: 1 battery 3.5 hours, 2 batteries 5.25 hours, 3 batteries 6.5 hours. Charging times with PD power supply: 1200 mA for 1 battery, 1000 mA for 2 batteries, 700 mA for 3 batteries. This will result in charging time of: 1 battery 2 hours, 2 batteries 2.5 hours, 3 batteries 3.75 hours.

Q: 10. Is this TRS or TRRS?

A: This ChargeWorx Lightning to 3.5mm Headphone Adapter (White, 3") would be TRRS.