The Lightning to USB Sync & Charge Cable from Kramer connects to your computer's USB port for syncing and charging, or to a USB power adapter for even faster charging from a wall outlet. The Apple MFi certified lightning connector goes in either direction, enabling easier connection of your devices.

Lightning Connector, Male    USB 2.0 Type-A, Male    Sync & Charge Cable    Apple MFi Certified

Related Questions and Answers

Q: 1. is the foot hot?

A: The bottom of the pictured portion of the image is not hot. Top only.

Q: 2. Will this support the newer Canon LP-E6P batteries introduced with the R5 Mark II?

A: Yes. The chargers for the LP-E6P batteries are the same as the current chargers for the LP-E6 and LP-E6NH batteries. So the Jupio Tri-Charge for Canon LP-E6 is compatible.

Q: 3. I want to use an opteca IF500 flash off-camera using a Sony A6500. Will this cable do the job?

A: The PocketWizard HSFM3 Flash Sync Cable, is not compatable with "Sony" flash units. If the Pocket Wizard trigger one is using is compatible with the Sony A6500 then the synch cable will "work" and trigger a non-Sony flash unit.

Q: 4. How many watts does it pull from the brick for maximum charging speed?

A: Jupio does not the list the wattage for the Jupio Tri-Charge for Sony NP-FZ100. However, they do mention that if you use a PD cable and a PD brick, it will be 9V and 2A (which is 18W).

Q: 5. Will the Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male BH #KORSMXM20 also allow you send signal from a timecode generator to your Sony FS7? How are the two cables functionally or anatomically different?

A: While the Kopul and the Camvate cables are basically the same. The Camvate model has a higher quality for Time code use and it would be the suggested cable to work with on the Sony FS7.

Q: 6. Does this have 4 pins to read the BLK22's temperature sensor or just 2 for charging?

A: The Jupio Tri-Charge for Panasonic DMW-BLK22 displays the status of the charge on the battery.

Q: 7. I have an old Vivitar 283 will this work with that flash unit?

A: I only own Canon cameras. Sorry.

Q: 8. Will this work with Sony HVL-F60RM?

A: Yes, this cable has a hot shoe designed to fit the extra length of the Sony hot shoe. This cable can be used with any flash that can be triggered in manual by a single pin connection.

Q: 9. How long does it charge one Sony NP-FZ100 battery from 0% to 100% full charge?

A: According to the manufacturer Charging times with standard USB power supply: 800 mA for 1 battery, 500 mA for 2 batteries, 400 mA for 3 batteries. This will result in charging time of: 1 battery 3.5 hours, 2 batteries 5.25 hours, 3 batteries 6.5 hours. Charging times with PD power supply: 1200 mA for 1 battery, 1000 mA for 2 batteries, 700 mA for 3 batteries. This will result in charging time of: 1 battery 2 hours, 2 batteries 2.5 hours, 3 batteries 3.75 hours.

Q: 10. Is it safe to store batteries in this Tri-Charge without USB power supplied? Will they discharge in my camera bag?

A: Yes, it safe to store the batteries inside the Tri-Charge if there is no USB power supply connected. The batteries will discharge as it normally would if it wasn't inside of the Tri-Charge.