The EVS-2540/FS/1F Executive Viewing Station with Floor Stand and Deep Drawer from GTI provides users with a 25 x 40" viewing area with a luminaire positioned parallel to the surface and floor for color correct viewing as well as a built-in print bar for attaching prints quickly. This model is designed to sit on the floor and utilizes Graphiclite T8 fluorescent lamps with a D50 light quality rated at about 5000K. The luminaire also features an asymmetrical lens design that directs light at an angle for even illumination on the work surface and wall. It comes with a metal table top, an adjustable height floor stand with casters, and a 5.25" deep drawer. Additionally, this unit comes with a LiteGuard II viewing system monitor which will display lamp hours used and lamp hours remaining for your station. It will also show lamp warm-up times, out of tolerance information, and where to obtain replacement lamps.

D50 Light Quality    Graphiclite T8 Fluorescent Lamps    Luminaire Positioned Parallel to Floor    Asymmetrical Lens Design    Viewing Area: 25 x 40"    LiteGuard II Monitor    Built-In Print Bar    Metal Table Top    Height Adjustable

Related Questions and Answers

Q: 1. Can this be mounted on a Manfrotto MPMXPROA4US? Will the threads fit?

A: No but you can use this Manfrotto instead: https://bhpho.to/41fEJFY

Q: 2. Can you remove the key without locking the drawer? I want to close the drawer, remove the key and leave it unlocked.

A: The key for the ProX T-2RD-12 Locking Rack Drawer does need to stay in the lock when the drawer is unlocked in order to full close the drawer. The latching piece inside of the drawer turns upward to the locked position when the key is removed, so if you remove the key when the drawer is pulled out, the latching piece will be in the locked position and prevents the drawer from being able to fully close.

Q: 3. What size are the mounting threads? 1/4 x 20, 3/8 x 16, or something else?

A: The Acebil MPBS-PRO Monopod Floor Stand has the 3/8" 16 mounting threads.

Q: 4. What is the inside height of the 2RU drawer (ProX T-2RD-12) drawer? It appears your spec are incorrect as they are showing 6 inches.

A: The correct height of the ProX T-2RD-12 drawer is 4". The manufacturer has only provided exterior dimensions which are 19" (L) x 12" (W) x 4" (H). Thank you for pointing out the error. Our web team will make the required corrections.

Q: 5. What is the length of each leg from the center?

A: The leg is approximately nine inches from the center out.

Q: 6. IS THE LOCK AND KEY INCLUDED?

A: No lock and key

Q: 7. What is the max height of the stands ?

A: The FLEXSON Floor Stand for Sonos Five or PLAY:5 (Black), B&H # FLXS5FS1021, is about 26.4" tall.

Q: 8. Can a Kupo 20" C-stand riser be used with this floor stand? I'd like to use it a a base for a modeling table.

A: The Kupo Universal Floor Stand (5") BH #KUKS302011 can be used with a C stand riser.

Q: 9. Since this Gator shallow drawer doesn't come with a keylock (and keys), does anyone know if the Middle Atlantic KYLK keylock (link below) work with this? Thank you.https://a href= http://www.bhphotovideo.com/c/product/244288-REG/Middle_Atlantic_KYLK_KYLK_Keylock_for_UD.html target= _blank www.bhphotovideo.com/c/product/244288-REG/Middle_Atlantic_KYLK_KYLK_Keylock_for_UD.html/a

A: Sorry, this product does not have the particular cut-out on the drawer face that is needed in order to install that keylock. The KYLK Keylock was made to be compatible with Middle Atlantic UD series drawers only.

Q: 10. Hi there! What's the load capacity on this monopod leg?

A: Acebil MPBS-PRO Monopod Floor Stand has a load capacity of 44 lb.