The 3.5x35 ACOG Dual-Illuminated Riflescope from Trijicon features a battery-free illuminated ballistic reticle and a durable waterproof housing to create a versatile weapon sight that is well-suited for use in a wide range of weather and lighting conditions. This Advanced Combat Optical Gunsight (ACOG) sight is outfitted with a red crosshair reticle that has bullet drop compensation stadia on the lower vertical hair that are specifically calibrated for 300 Blackout caliber ballistics. Anti-reflection broadband fully multicoated optics maximizes light transmission to provide bright and clear views with limited distortion.

Trijicon's battery-free dual-illumination reticle system employs a tritium phosphor lamp for low-light and night targeting, as well as a fiber optic illumination that automatically adjusts reticle brightness when operating in daylight. The reticle’s aiming point can be adjusted in 1/3 MOA increments, and an internal adjustment mechanism allows the ACOG to reliably hold zero. The ACOG is outfitted with a TA51 mount that has two thumbscrews for clamp-on attachment to a Picatinny rail. Complementing the ACOG's optical system and caliber-specific ballistic reticle is a nitrogen-filled, aluminum housing with a scratch and corrosion-resistant hard-anodized matte-black finish that provides the durability needed for reliable performance in a wide range of shooting conditions.

Red Crosshair BDC Reticle    Ballistic Reticle for 300 Blackout    Tritium/Fiber Optic Reticle Illumination    Nitrogen-Filled Fogproof / Waterproof    Hard-Anodized Aluminum Housing    1/3 MOA Impact Point Correction    2.4" Eye Relief    TA51 Flattop Mount    Made in USA

• 3.5x magnification
• 35mm diameter objective
• Fully multicoated optics
• Broadband lens coating
• 5.5° angle of view
• 2.4" eye relief

• Red Crosshair dual-illuminated reticle
• Ballistic drop compensation (BDC) reticle for 300 Blackout caliber
• The supersonic BDC (out to 600 yds.) has been merged with the subsonic BDC (out to 200 yds.) to provide one set of aiming points for both types of ammunition
• The reticle drops are based on an average of commonly available off-the-shelf subsonic and supersonic ammunition from a 16" barrel
• This BDC reticle is not limited to one or two specific bullets: a majority of commonly available ammunition will fall within the 2 MOA diamond aiming points
• The 2 MOA diamonds offer a balance of speed and versatility based on the unique performance of the 300 Blackout caliber
• The drops in MOA for each aiming point are provided for users who wish to develop their own handloads for use on firearms with a barrel of 16" or shorter, or for those who wish to deviate from the recommended zero distances
• Battery-free illumination uses fiber optics or tritium
• Fiber optics: Focuses, channels, and filters ambient light to illuminate the reticle
• Tritium isotope: Interacts with a phosphors membrane in the system to create illumination for the reticle

• 1/3 MOA impact point adjustments
• Includes TA51 mount for AR-style flattop rail

• Nitrogen-filled for fogproof and waterproof performance
• Waterproof to 328' (100m)
• 7075-T6 aluminum alloy housing
• Matte black scratch and corrosion-resistant hard anodized finish
• 14.0 oz weight (without mount)
• Made in the USA

Related Questions and Answers

Q: 1. What does MOA mean?

A: Red dot sight reticle sizes are measured in milliradians (mrad or mil) and minutes of angle (moa), which both are angular measurements, making them handy units to use in ballistics

Q: 2. Will this fit 3x35 scopes?

A: Unfortunately the Trijicon RMR Mount for 3 x 30 ACOG Scopes with Bosses will not fit a 3 x 35. The mount you will need is the Trijicon RMR 35 Mount for TA01NSN ACOG. The RM 35 will work for 3.5x, 4x and 5.5x ACOG Models with boss. I have attached the mount from B&H.

Q: 3. Does this scope come with a sun shade?

A: Yes the Trijicon AccuPoint 5-20x50 Riflescope does come with a sunshade.

Q: 4. Will this scope work well on a 16" 556 rifle?

A: According to Trijicon the Trijicon 1-8x28 VCOG Riflescope (Red Circle-Crosshair MRAD Reticle) BH #TR18X28MRAD • MFR #VC18-C-2400003 is Integrated Picatinny/Weaver Rail Mount

Q: 5. What’s the warranty?

A: The Kahles 1-6x24 K16i Riflescope has a Limited Lifetime Warranty.

Q: 6. I cannot get my TA02 elevation adjustment to adjust down. In fact, I'm getting no movement up or down. Windage works. What can I do?.

A: If the elevation adjustment on your Trijicon 4x32 ACOG LED is not moving at all. I would suggest you return as it seems you have an internal mechanical mechanism failure. So there is very little you can do.

Q: 7. What size in mm throw lever fit this scope?

A: This is the complete specifications that Barska is providing: Brand Barska Series Contour Model Number AC10552 UPC 790272977215 Magnification (Zoom) 3x-9x Objective Lens 42mm Tube Diameter 1 in Eye Relief 3.9 inch Exit Pupil 14.0-4.6mm Click Value 1/4 MOA Field of View(ft@100yds / m@100m) 36.7ft/12.3m@3x, 12.5ft/4.2m@9x Reticle Illuminated Mil-Dot Reticle Illumination Yes Reticle Color Red / Green / Black Turret Style Capped Focal Plane Second Optical Coating Fully Coated Waterproof Yes Fogproof Yes (Nitrogen CO2) Adjustment Knob Windage, Elevation, and Adjustable Rheostat Product Weight 16 oz. Length 9.13 inch Finish Black Matte Battery Life One CR2032 3V Lithium Battery Included Included Accessories Scope Caps and Lens Cloth Warranty Limited Lifetime Warranty https://www.barska.com/3-9x42-ir-contour-mil-dot-compact-rifle-scope-barska.html

Q: 8. Would I be able to remove the RMR and mount it on my pistol?

A: I can only verify that the Trijicon 4x32 ACOG Dual Illuminated Riflescope and 3.25 MOA Red Dot Type 2 RMR Sight Kit (DI .223 Red Chevron Reticle, Matte Black) BH #TR4X32RC223 • MFR #TA31-D-100549 Mounts on ACOG and comes with Trijicon ACOG Picatinny Rail Adapter

Q: 9. Hi there, Is this reticled for 308 or chevron 308?

A: The MFR needs to be contacted for this answer.

Q: 10. Does this product come with lens covers just like the photo shows?

A: Yes, the lens covers are included.