The Impact ControlSync 16 Transmitter provides photographers with a wireless solution for triggering their select flash head at distances up to 150'. The ControlSync 16 is compatible only with Impact's AS-X-400 Astral Extreme and its kits. It also works with Interfit's Strobies line of flashes and the Angler Q-400. The 16-channel, 16-group transmitter has a built-in antenna and hot shoe and uses a separately purchased 16-channel, 16-group receiver that is powered by its host flash without using batteries.

Operating on the 433 MHz frequency, the ControlSync 16 Transmitter can raise and lower the power of the slave flash in 1/10 or 1/3 stop increments as well as turn modeling lights and audio alerts on and off. It's also capable of turning the AF assist on or off on flash units that have this feature. The ControlSync 16 transmitter runs on 2 AA batteries and is intended for use with the CS-16-R receiver. Besides triggering your flash from up to 150' away, the ControlSync 16 transmitter can be used as a handheld remote controller to adjust the settings on all your compatible flash units that are connected to a ControlSync receiver, even if you use a different device or method to trigger them.

For Impact Astral Extreme AS-X-400    Compatible w/ Interfit Strobies Flashes    ControlSync 16 Channel Transmitter    Raise or Lower Flash Power Remotely    Controls Modeling Lamps and AF Assist    150' Range, Controls Audio Alerts    View Transmitter Settings on LCD Screen

Related Questions and Answers

Q: 1. Can I plug the receiver into studio strobe setup? Like if the strobe light has mic plug-in! Will this plug-into the strobes to trip them?

A: Yes, and it includes 3.5mm Sync Cable and 3.5mm to 1/4" Plug Adapter in the box.

Q: 2. Can I use this PowerTrigger on a Nikon D7200 and Westcott Strobelite Plus?

A: Not familiar with Nikon. I shoot Cannon

Q: 3. i found that there 2 settings. one for the bolt VB 11,22 . one for the impact astral extreme AS-X-400 .. by holding down the set button. and pressing the test button 2 times you can change between mode's for the 2 brands . the bolt setting will show 1/128 with a second line when turning up power +0.3 .. the Impact Astral Extreme AS-X-400 setting will display 1.0- 7.0 hope this helps Ps. if its on the wrong setting you can not adjust the power out put or turn on the Modeling Lamp ...!?

A: All the triggers talk to each other different names but sane guts.

Q: 4. I have an old impact T-616 receiver. Will it work with this new model transmitter?

A: No. This is not backward compatible.

Q: 5. are these compatible with the older Impact PowerSync16 DC Radio Slave System?

A: No, the Impact PowerSync Mini Transmitter and Receiver Kit is not compatible with the older Powersync16 DC radio.

Q: 6. hi I just bought this trigger ( impact power trigger) and is not working... I have a canon 6d and have put the transmitter on the hot shoe of the camera and the red light has not light up even though i tried the 16 channels. the equipment is new so I may say the battery is new too... the connection in the impact vsd 160 monolight is ok... could it be a problem on the camera? I also have trouble shooting with the original sync cord that came with the monolight... please any indications will help. Thanks

A: I had the same difficulties with my trigger. I sent it back to the manufacturer and they said they could not find anything wrong with it. I did try I few things to troubleshoot it including the battery but it still didnt work. Impact said they would ask B&H to refund me.

Q: 7. I have a Nikon D300. Can the flash power of this unit be controlled by the in camera manual flash settings?

A: This transmitter can control the manual settings for the Impact AS-X-400 monolight, the Bolt VB-11 and the VB-22 bare bulb flashes. These flashes would require the Impact ControlSync 16 Receiver as shown in the following link to utilize this function: a href= http://bhpho.to/1tjM4Nx target= _blank http://bhpho.to/1tjM4Nx/a

Q: 8. I have a set of Photogenic strobes (from the early '90's). Will this work with Photogenic strobe models from that time frame?

A: If your Photogenic strobes use the standard IEC power cable and has either a 1/8 (3.5mm) miniphone sync terminal or 1/4 headphone sync terminal, then yes, the Impact PowerTrigger 16 Channel AC Transmitter and Receiver Set would be compatible for use with your strobe units.

Q: 9. Will this work for sony a7III ?

A: No, Sony uses a multi interface system for the shoe and remote. Click the link below to view; https://bhpho.to/2ED0aLJ

Q: 10. Will the transmitter work with a Nikon FE2 film camera? I need a way to fire a remote SB-910 speedlight.

A: The Impact PowerSync Mini Transmitter and Receiver Kit BH #IMPS16MINRTK can be used with a SB 910 and a Nikon FE2.