You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Atlasied Atlas Sound Aa50phd 4-input 50w Bgm Mixer Amplifier

Atlasied Atlas Sound Aa50phd 4-input 50w Bgm Mixer Amplifier
  • Product Code: ga178394
  • Availability: In Stock

$1,337.97 $1,685.84

Powering 50W into 25V, 70.7V, or 4 ohms systems, the AA50PHD from Atlas Sound is a 4-input mixer amplifier designed for distributed-business paging, background music systems (BGM), small-to-medium speech-privacy systems, or any situation in which music-on-hold is a must.

Featuring one microphone/line input, one 1/8" input, and two RCA stereo-summing line inputs—as well as a variety of connection possibilities via the rear panel—the AA50PHD allows you to group inputs together for the purpose of muting/attenuating them by any signal affecting channel one. A rear-mounted DIP switch affords you more muting options, and a preamp out/power amp-in is useful for external processing, should you require it. Finally, a remote input selector port comes standard on the back of the mixer, allowing you to control the unit with Atlas Sound accessory items (sold separately).

50W into 25V/70.7V and 4 Ohms Loads    4x Inputs with PHX and RCA Options    Rear-Mounted DIP Switch for Mute Options    Preamp for External Processing    Stereo-Summed Inputs

Key Specs
Number of Channels3
Amplifier Power Rating4 Ohms:
50 W RMS
Load Impedance / Voltage25 / 70 V
4 Ohms
Audio I/O1x Block 3-Pin Balanced Mic/Line Input
1x Stereo RCA Unbalanced Aux Input
1x 1/8" / 3.5 mm Unbalanced Aux Input
1x RCA Unbalanced Amplifier Input
1x RCA Unbalanced Preamp Output
Amplifier
Form Factor/TypeTabletop
Number of Channels3
Amplifier Power Rating4 Ohms:
50 W RMS
Load Impedance / Voltage25 / 70 V
4 Ohms
Performance
Frequency Response80 Hz to 15 kHz ±3 dB
Input SensitivityMic:
5 mV
Line:
316 mV / -10 dBV
I/O ImpedanceRCA Amplifier Input:
600 Ohms
Block Zone Output:
600 Ohms (Unbalanced)
10 Kilohms
RCA Preamp Output:
150 Ohms (Unbalanced)
Mic/Line Input:
1200 Ohms
Aux Input:
10 Kilohms
RCA Input:
10 Kilohms (Unbalanced)
Output LevelZone Output:
1 V Max (Unbalanced)
SNRMic:
> 55 dB
Line:
> 55 dB
Aux:
> 75 dB
THD+N< 1% (1 kHz, at Rated Power)
Signal Processing
EQTreble: ±6 dB at 10 kHz
Bass: ±6 dB at 100 Hz
Connectivity
Audio I/O1x Block 3-Pin Balanced Mic/Line Input
1x Stereo RCA Unbalanced Aux Input
1x 1/8" / 3.5 mm Unbalanced Aux Input
1x RCA Unbalanced Amplifier Input
1x RCA Unbalanced Preamp Output
Other I/O1x Block 2-Pin Mute
2x Block 4-Pin Remote
Speaker Outputs1x Block 4-Pin Balanced
1x Block 2-Pin Unbalanced Zone
Phantom Power24 VDC
Power
AC Input Power120 VAC, 60 Hz
AC Power Connector1x Hardwired Cord / NEMA 5-20
Current Consumption0.24 A (Idle)
1.52 A (1/3 Power)
2.37 A (Max)
Power Consumption14 W (Idle)
146 W (1/3 Power)
242 W (Max)
Physical
Dimensions8.3 x 3.7 x 10.9" / 210.0 x 93.0 x 276.0 mm
Weight10 lb / 4.5 kg
Packaging Info
Package Weight12.45 lb
Box Dimensions (LxWxH)14 x 11.7 x 7.2"

  • Rear-mounted DIP switch allows mute receive for inputs two and three
  • Contact-closure mute terminals
  • Variable mute sensitivity control for input one
  • Preamp in for external processors
  • 1x line output
  • Remote input select (RIS)
  • Remote level control
  • Input-assignable zone two output
  • 3x unbalanced, summing line level inputs
  • 1x balanced mic/line input with phantom power
  • Automated diagnostic system test for testing speaker wiring and load impedance on 70V speaker systems

Related Questions and Answers

Q: 1. Can you load a mix to two tracks and have it there for others to more add tracks later?

A: Yes, you can import a file (such as the master bounce of a mix) into a project using a USB flash drive in USB HOST mode. After importing a file, you can use all other open channels to record more tracks.

Q: 2. Can you link two of the mono tracks in the setup to have additional stereo inputs from the 2 that are on the L20?

A: Yes, you can use any of the individual mono input channels to connect instruments, mics or other devices in order to create a stereo input. For example, if you are using a stereo microphone or connecting a keyboard that has two separate outputs for left and right, you can certainly connect each output to a different individual mono input on the L-20.

Q: 3. can I export the UI 16 to india

A: Most European countries will allow electronic devices to be shipped. To be sure you will need to contact your carrier to find out if they will be able to send that unit.

Q: 4. Can you play a track and record on another at the same time?

A: Yes, the Zoom LiveTrak L-20 - 20-Input Digital Mixer & Multitrack Recorder is capable of file playback while also recording.

Q: 5. Is there a click track?

A: Yes it has a built in metronome. You can activate it and alter it via the instructions on page 51 - 55 of the manual. https://www.zoom-na.com/sites/default/files/products/downloads/pdfs/E_L-20_OperationManual.pdf

Q: 6. Is there a maximum recording time per song?

A: With a 128 GB SDHC/SDXC Memory card, you can activate all 20 channels for recording and record for 10 hours and 56 minutes. Recording on just one channel yields 80 hours, 13 minutes. (2 channels = 60 hours 10 minutes) This is at a 44.1 kHz, 24 Bit rate and bit depth. At 96 khz, 24 bit, 1 track will run for 36 hours, 51 minutes and 20 tracks will record for 5 hours, 1 minute. If you want to use 48 kHz, 24 bits,, 1 track is 73 hours, 42 minutes and 20 tracks is 10Hr. 3 min. Recording at 16 bits? Multiply these times by 1.5. This is the total time for as many songs as you have. If they each run 4 minutes, you can record a lot of songs before you have to empty the memory card. I've found my machine to be a solid performer! Very clear recordings!

Q: 7. Does this mixer have midi in/out for fx sync?

A: The Soundcraft Signature 12 MTK does not feature any MIDI functionality or connections.

Q: 8. Can you bypass all of the onboard effects and record straight from the pres to the SD card?

A: Yes you can bypass effects also record to sd card all of your recordings save to SD card

Q: 9. Does anyone know if it is possible to use a different usb bluetooth adapter?

A: No and I do recommend using their Bluetooth adapter for a clean signal

Q: 10. Can the Ui12 model be rack mounted?

A: The Ui12 is not designed to be rack mounted. USB, Ethernet as well as power switch are located on the left and right sides of the unit.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Louroe Sa-1a Sound Activated Switch

$719.85 $943.00

K&m 23550 Adjustable Microphone Bar

$62.97 $98.23

Rps Lighting Accessory Mount Bar (6")

$53.85 $67.31

Soundcraft Gb4 - Live Sound / Recording Console

$6,213.00 $9,195.24

Williams Sound Digi-wave Connect

$1,215.00 $1,664.55

Schoeps Microphone Capsule Mk 2

$2,997.00 $4,615.38

Smartsystem Smartslider Bar 60

$194.85 $290.33

Bassboss Rmfla Bumper Bar For Mfla Line Array

$4,485.00 $6,727.50

Products You May Like

Tiffen 3 X 3" Black Diffusion/fx 5 Filter

$463.50 $616.46

Vertiv Liebert Gxt5-1500lvrt2uxl Ups

$4,054.32 $4,865.18

Sabrent 7-port Usb 3.0 Hub

$134.97 $186.26