The black, redesigned MT190XPRO3 Aluminum Tripod from Manfrotto builds on the success and popularity of the previous 190 series with professional hardware and convenience features that make it even easier to use than its predecessor.

Set up is faster than ever with Manfrotto's Quick Power Lock System that allows you to completely extend the tripod legs with just one hand. Once set up you can use the MT190XPRO3's rapid center column in standard vertical mode or swing it into horizontal position like a boom with Manfrotto's 90° Column feature. Enlarged tabs on the individual leg angle selectors allow you to get down to only 3.5" for macro work with the column in horizontal mode. And once you're down there you can attach any of Manfrotto's flexible or articulated arms to hold lights or reflectors via the Easy Link plug built into the tripod's spider.

Convenience features include grippy, rubber leg warmers on two legs for cold or inclement weather and a bubble level that rotates so that you can see it easily regardless of the tripod's position. Finally, Manfrotto's insistence on form following function has yielded a tripod that you'll not only be happy to use but you'll be happy to be seen with, too.

Load Capacity: 15.4 lb    Max Height: 67.5"    Min Height: 3.5"    Folded Length: 27.7"    Leg Sections: 3    Weight: 5.6 lb    90° Center Column    Ball Head with Independent Pan Lock    Arca-Type Compatible

The Quick Power Lock (QPL) system is one of the most eye-catching and unique features of the redesigned 190. It is a strong, ultra fast, ergonomic locking system that allows for complete extension of the legs with one hand.

One of the most innovative aspects of the 190 series is its compactness, which allows for easier portability. The redesigned patented 90° Column is accessible whenever you need it with simple one finger operation.

The plug allows instant connection between tripod and accessories, such as LED lights for macro photography and DSLR video applications using Manfrotto articulated arms and brackets.

The bubble is easy to read, whatever the shape of the head or however the tripod is positioned. Just rotate it towards you for easy viewing.

Each leg has user selection of four angles to accommodate uneven ground or rough terrain. The selectors are manufactured according to most innovative ergonomic standards to prevent fingers and nails being trapped in the upper casting.

The entire shape of the tripod has been modified and made more manageable and stylish. The complete redesign of its functional elements shows a particular attention to aesthetics and details: the brand name, for example, appears in many sections of the new 190, including the two legwarmers made of comfortable rubber to provide a secure grip and prevent the conduction of heat and cold in extreme weather conditions.

Related Questions and Answers

Q: 1. What is the diameter of the base plate?

A: The diameter of the base plate on the Manfrotto MT190XPRO3 Aluminum Tripod is 2.36" (60mm).

Q: 2. Would this work well as a support for my Ikan 31 camera slider?

A: I also have a 24'' slider with this tripod- but I would be careful using a slider with more length.. depending on what kind of rig you have up top, there could be enough weight to create some wobble- I would recommend using 2 tripods.

Q: 3. Do the older heads for a 190xPROB fit on this new tripod. I have an 804RC2 head for example and it looks like the uniting plate is different ?

A: The tripod has a standard 3/8 -16 head mount screw. Any head using 3/8 -16 will mount.

Q: 4. How would I use the tripod in very low position without having center pole in 90 degree position? Can I take the center pole out and attach the ball head somehow? I want camera in normal position on tripod (not at 90 degrees) but have the tripod very low. Thanks.

A: Unfortunately, the Manfrotto XPRO series of tripods (such as this 190XPRO3) can only achieve its lowest positions by laterally extending the center column. Other versions of Manfrotto tripods offer a low-height center column mounting piece, but the unique design of the XPRO tripods does not.

Q: 5. What is the difference in leg diameters of the 055 and the 190?

A: Manfrotto MT190XPRO3 has 3 leg section. The top section has a 25mm diameter, the middle section is 20mm and the lower section is 16mm.

Q: 6. What are the biggest differences between this model and the older 190xpro model? Does the new features compensate the extra dollars for the newer version?

A: The new model has improved leg locks, lateral collar and leg angling hardware as well as improved sleeving in the leg sections.

Q: 7. I have a nikon d3400 with a few different types of lenses. I wanted to take this camera and pick up this tripod for an overseas vacation. Is this tripod a good purchase or should i go with a different one?

A: My experience over about 6 months of use in 2016 is great. I use it with my Sony Alpha 7II with both 50mm and 24 to 240mm OSS zoom lenses. Very sturdy, retractable handles make for compact transport and storage. Very high quality build also means a bit heavier than lesser tripods. I'd buy it again. Worth ever penny.

Q: 8. What is the maximum height with and without the centre column extended?

A: For the Manfrotto MT190XPRO3 Aluminum Tripod the Max Height without Center Column is 53.2 inches / 135.1 cm.

Q: 9. will the half-ball 75mm Manfrotto 502a fluid head work on this tripod ?

A: No, the 502 Fluid video Head with 75mm half ball will not fit on the Manfrotto MT190XPRO3 Aluminum Tripod, as the tripod is not capable of taking a half bowl of any size. Alternatively one can use the Manfrotto 502AH Pro Video Head with Flat Base, BH #MAMVH502AH (https://bhpho.to/3d9niTB).

Q: 10. Made in Italy?

A: Country of origin is Italy.