Attach various 1/4"-20 accessories to the DJI Ronin stabilizer with this Dual Plate Accessory Mount from GyroVu. Two, 1/4"-20, flanged, button-head, socket-cap screws (3/8" long) are included. This mount can be attached on any 25mm rod/pipe, so it's not limited to the Ronin. It clamps on and secures tight with screws.

Attach Various 1/4"-20 Accessories    1/4"-20 Screws Included    Clamp/Screw Attachment to Ronin    Carbon Fiber Plate, Plastic Clamp

Related Questions and Answers

Q: 1. Will this work with my Canon M100?

A: Yes it will.

Q: 2. Is the Ronin-SC compatible with a Sony A7 iv? The DJI website says it is compatible with the A7R4, but does not mention the regular A7 iv.

A: The DJI Ronin-SC Gimbal Stabilizer has a maximum payload capacity of 4.85 pounds, so it can balance a Sony a7 IV with a light lens. However, the gimbal's camera controls are not compatible with this camera.

Q: 3. Is it possible to charge another device off the usb-c port, like keeping a cell phone or small tablet used as an extra monitor charged for example?

A: Unfortunately, the USB-C ports on the DJI Ronin-SC Gimbal Stabilizer is not recommended for powering external accessories outside of DJI products.

Q: 4. Can the Ronin SC be used with prosumer-size camcorders, like the Panasonic WXF 991K or the Canon HF G 50?

A: Yes, since both camcorders are less than Ronin SC's maximum payload (4.4lb), the gimbal will work with both camcorders.

Q: 5. Work a Nikon Z50? With lenses? 50 - 250? Thanks

A: Yes, The Nikon Z50 and the 50-250 lens is supported when using the DJI Ronin-SC Gimbal Stabilizer. More info and tested lenses - https://bit.ly/3g650AH

Q: 6. Will this unit support the weight of a Nikon D780 with a lens 18-300mm?

A: The Nikon D780 has been tested on the Ronin SC and would be compatible. However, You may need to counterbalance the heavy lens with counterweights. The DJI RS2 or the RSC2 would be a better choice and they handle more weight and longer lenses.

Q: 7. works for the BMPCC4K?

A: Unfortunately it does not. The Ronin-SC is designed for smaller mirrorless cameras only. For the Pocket Cinema Camera 4K you would need the Ronin-S with an offset plate. Ronin-S - https://bhpho.to/2FJgGoG Offset Plate - https://bhpho.to/31mQrjL

Q: 8. Will a Nikon D 5500 work with this rig?

A: DSLR cameras in general are not recommended or listed as compatible with Ronin-SC. You would need to look at models like the Ronin-S for a DSLR like the D5500. https://bhpho.to/2WcPtmF

Q: 9. Is the ronin sc compatible with canon 5d

A: While it might be possible to balance it with pancake lenses, it is not at all recommended for the 5D.

Q: 10. Will ActiveTrack 3.0 Subject Tracking work if I use my Nikon Z fc? I'm hoping for a setup where I can put this gimbal down and the gimbal can record me moving around when I'm in front of the camera (using my camera's eye autofocus).

A: Yes, The DJI Ronin-SC Gimbal Stabilizer would work allowing you to use Active track 3.0 Tracking with the Gimbal sitting on its tripod. Both the Nikon Z7 and Z7II are supported https://bit.ly/3HG2gpY