Thin and versatile, Trimount Heat-Activated Permanent Dry Mounting Tissue from Drytac is a permanent, breathable tissue that is recommended for bonding resin-coated photographs, posters and other printed materials to most smooth surface substrates. The pH-neutral, heat-activated adhesive will bond at temperatures as low as 185°F. Trimount mounting tissue is suitable for use in all types of dry mounting presses.

Activation Temperature: 185-210°F    Off-White Kraft Paper Base    Heat Activated Solvent Acrylic Adhesive    Average Mounting Time: 60 to 90 Seconds

• Suitable for use in dry mount presses
• Tack-free at normal ambient temperature
• Does not require a release liner

Related Questions and Answers

Q: 1. Does all the film come in a single bag, or are there multiple bags inside of the box of 100?

A: Four bags x 25 sheets each.

Q: 2. Will this pier accept an HEQ5 mount? Is their an adapter for it?

A: The iOptron Permanent Pier (35.5") BH #IO8038900 • MFR #8038-900 should accept the Sky-Watcher HEQ5 GoTo Equatorial Mount

Q: 3. Has anyone mounted a monitor to this boom and if so, how was it done? What is the diameter of the pole between the 2 rubber hand grips?

A: You would be able to use a 1/4 20 with a clamp to mount it on the boom, unfortunately not able to find the diameter. https://www.bhphotovideo.com/c/product/1422137-REG/smallrig_2161_multi_functional_crab_shaped_clamp.html

Q: 4. Are the four holes in the top plate suitable for grub screws or some other item to hold the tripod head in place (to keep it from rotating)?

A: No, those holes are for the downward screws that attach the black part to the silver base.

Q: 5. Is this leveling base compatible with the Manfrotto 608 Fluid head?

A: Yes the Manfrotto 608 Fluid Head is compatible with this leveling base.

Q: 6. How do you change between the 3/8 and 1/4 inch studs?

A: You will need a 1/4"-20 to 3/8"-16 bushing. https://www.bhphotovideo.com/c/search?Ntt=bushing&N=0&InitialSearch=yes&sts=ma

Q: 7. What is the top threaded connection where the head or camera would be attached?

A: This unit has a 3/8"-16 for attaching a tripod head. It would not be directly compatible with most cameras.

Q: 8. 14.3 lbs on a 1/4" - 20 ?? Am I the only one who doesn't trust this tiny screw to support a moving camera rig (under stress)? Engineers please weigh in and reassure me.

A: If your camera/device has a 1/4-20, this will handle it. If you look up the tensile strength of 1/4"-20 bolts, you will see figures that are greater than what you can lift.

Q: 9. Is this compatible with the Sirui W-2204 tripod, and the Manfrotto MVH500AH?

A: Yes. This will mount to tripods with a 3/8"-16 mounting stud (about 98% of modern tripods), including the aforementioned Sirui and Manfrotto tripods.

Q: 10. Is it strong enough at full length ?

A: Yes. The following unit will support 14.3 payload.