The 8U Roto Rack Case from SKB provides solid protection to rackmount equipment for musicians and pro-audio engineers. The rotationally molded polyethylene case ensures strength and durability, while the recognizable bar design signifies the 8 RU rack size on the front and rear covers. The recessed steel twist latches with front and rear rubber gaskets ensure the cover's tight seal against moisture and dust.

Internally, the front and rear steel rack rails provide up to 17.6" of depth and allow for gear to be mounted from the front and rear for added stability during transport. Heavy-duty polyethylene plastic flush-mount handles are used for ease of transportation, while interlocking ribs permit secure stacking when storing rack cases together before transport. The case ships with a bag of 24 rack screws and hex-nut clips for racking your equipment.

Rotationally Molded Polyethylene Plastic    Front and Rear Steel Rack Rails    Recessed Steel Twist Latches    Front and Rear Gasket Covers    Heavy-Duty Flush-Mount Handles    Interlocking Ribs for Stacking    Size Bar Design for Front and Rear Cover    Rack Screws and Hex-Nut Clips Included

Related Questions and Answers

Q: 1. how to fit the with Wheels in this case it is passible ?

A: No. The 6 U has wheel possibilites. https://www.bhphotovideo.com/c/product/757616-REG/SKB_1SKB_R1906_Roto_Rack_6U_Expander.html

Q: 2. Where can I find front and rear recessed steel twist latches mechanism? we bought two of these 12U cases in April 2021. Each cover latches are not holding to main case keeper anymore. They just come loose when in transport or move between building. So frustrating. Thanks

A: I would recommend contacting customer support at SKB and making them aware of the issue with the latches not holding the covers securely. The case is still under warranty. SKB does have replacement parts and may be able to offer an option for a different type latch, possibly with a lock to prevent the covers from becoming loose during transport. As an additional option for extra security, you may want to use a strap or bungee cord wrapped around the exterior and running through the side handles. You can reach SKB by phone at 800-410-2024 or by email at customerservice@skbcases.com. Here is a link to view SKB's warranty information: http://store.skbcases.com/warranty-information/

Q: 3. Does this cone with mounting hardware/screws?

A: The SKB 1SKB-R6S 6U Roto Shallow Rack Case with Steel Rails has rails for mounting within, but rack screws and other hardware are not included with the purchase of this case.

Q: 4. Will the Mackie ProFX12v2 fit in this case? I read somewhere it did not fit and want confirmation before I buy either of these.

A: Hello Derek Unfortunately, no the Mackie ProFX12v2 will not work on the 1SKB-R106. We recommend getting the Model: 1SKB-R106W, which is our newer version of the case which has an open back along with a pull handle and wheels.

Q: 5. Are these stackable?

A: No, the Gator G-PROR-8U-19 Pro-Series Roto-molded 8U 19.25" Deep Rack Case is not designed to be stacked with another.

Q: 6. What is the maximum load that this case can carry?

A: Have not idea

Q: 7. What are the interior dimensions?

A: The interior dimensions for the SKB 6U Roto Shallow Rack Case are as follows. The interior width is 19 inches and the interior height is 10.50 inches. The depth is 10.70 inches with a total capacity of 6 rack units.

Q: 8. Are there front & back lid covers for this SKB 6U rack?

A: Yes. There are 2 convex panels (one front and one back) that are easily fastened and/or removed via 4 twist knobs. These panels are made of the same material as the rest of the case.

Q: 9. What is the threading on the rails?

A: 10-32 We are making use of Extra-Wide Truss Head Phillips screws ( Passivated 18-8 Stainless Steel, 10-32 Thread, 3/4 Long).

Q: 10. On the SKB 1SKB-R8UW , what is the internal depth between front and back rails?

A: The depth of the rack case, measured rail to rail is 17.8 inches.