Optimized for medium-to-high zoom magnification, the 6-18x40 Condor Riflescope from BRESSER offers a side focus parallax correction, 40mm objective lens for bright images in most lighting conditions, high transmission fully multi-coated optics, and an illuminated Target Dot Reticle. The reticle is located in the second focal plane and features a thin black crosshair and a red center dot with variable brightness. It is powered by the included CR-2032 battery and has an automatic power-off function that extends battery life. The single-piece O-ring sealed aluminum housing can be mounted to your firearm via optional 1" rings and offers waterproof, fogproof, and impact-resistant performance. To aid in correcting for ballistic drop and wind-drift, the capped windage and elevation turrets offer 1/4 MOA impact point correction with true re-zeroing abilities. The fast-focus eyepiece also features a low profile lever for one finger operation. Also included is a bikini lens cover.

Illuminated Red Target Dot, 2nd Plane    1" Diameter Main-Tube    1/4 MOA Impact Point Correction    Capped Windage/ElevationTurrets    Side Focus Parallax Correction    One-Piece Aluminum Housing    Fully Multi-Coated Optics    Waterproof andFogproof    Impact-Resistant

• 2nd focal plane
• Thin crosshair
• Illuminated red center dot
• Variable brightness

Related Questions and Answers

Q: 1. Can the handle power on a monitor as well?

A: No it cannot: The Tilta Side Focus Handle Type II supports a Sony F570 battery and lets you power and control the Nucleus Nano motor, sold separately. Alternatively, it can be used to power and control start/stop on compatible cameras. "

Q: 2. Does the record/stop button work to control the ZCam E2-S6?

A: It will if your camera supports the R/S function. A built-in run/stop button allows you to control the record start/stop function of your camera through an optional R/S cable (for cameras that support this function).

Q: 3. Can Canon LP-E6 batteries be used in this handle?

A: No, the handle supports Sony NPF570

Q: 4. Will this be able to start/stop recording on a Nikon Z6 II?

A: Yes it will as long as you have the correct run stop cable. The Nikon Z series cameras need the: Tilta Nucleus-Nano Run Stop Cable For Nikon Z Series B&H # TIRSWLCT04NK MFR # RS-WLC-T04-NKZ

Q: 5. Does the N1 or N3 cable will work with Nikon D7500? Thank you.

A: the manufacturer does not list the D7500 but the closest camera to that model is the D7100 and that uses the N3 type cable

Q: 6. Is the run/stop compatible with the ursa mini 4.6k g1?

A: The Tiltaing Right-Side Advanced Focus Handle Type V is not compatible with the URSA Mini 4.6K G1.

Q: 7. Can this be powered by Tjlta left side focus handle w a dummy battery?

A: Yes, you could power the Tiltaing Right Side Advanced Focus Handle with a dummy battery from the Tiltaing Left Side Advanced Focus Handle through the DC port.

Q: 8. nikon z8?

A: At this time the Tilta Left-Side Advanced Power Handle with Run/Stop (F570, Black) is not compatible with Nikon cameras.

Q: 9. Does this work with any Canon cameras? Specifically the R6?

A: The Tiltaing Right-Side Advanced Focus Handle is compatible with any camera that has R/S control. This handle can use a USB protocol that is compatible with a majority of Canon cameras, including the Canon R6. Here is Tilta's website that shows which cable is compatible with which cameras: https://tilta.com/shop/advanced-side-handle-run-stop-cable/

Q: 10. Could I connect the iFocus motor be paired with this handle for focusing through an attached cable?

A: No, the Tiltaing Left-Side Advanced Focus Handle with Run/Stop (F570, Tilta Gray) is only meant to interface with focus motors, and will not likely work with other brands.