Mount your quick release plates, tripod heads, and other equipment to a pipe or flat surface with this Python Clamp from 9.SOLUTIONS, which is available here with a 3/8"-16 male thread. It features excellent strength with a load capacity of 44 lb, and can clamp down on objects up to 1.97" in size. The tightening knob uses an igus Polysorb thrust bearing that helps increase torque, and on the other side of the clamp is a standard 3/8"-16 male thread. This thread is independent from the tightening knob, meaning the clamp can be removed without needing to remove your mounted accessory. Also, the clamp features a standard 3/8"-16 connection for the tightening knob, permitting it and the male thread to be removed and have other accessories attached, such as a grip head, to create a more versatile support solution.

Load Capacity: 44 lb    Clamping Range: 0 to 1.97"    Tightening Knob    3/8"-16 (M10) Male Thread    3/8"-16 (M10) Connection

Related Questions and Answers

Q: 1. Why is this only for in-store pickup?

A: This item contains hazmat chemicals and unfortunately we are not shipping hazmat at this time.

Q: 2. Is this safe for sensors without o low pass filter such as the Canon 5DsR, Canon 5DMIV and Sony a7RII?

A: I'm sure you will be fine with this. I used it with a Flux Capacitor and Quantum Fuzz Detector and had no problems.

Q: 3. Can i upload software in the Ipad or do I need a laptop computer?

A: Yes, you can run this software via an app on an iPad. However, a PC is still required for the server component of the iOS device.

Q: 4. Does this come with the plugs?

A: In the Box of this Bolt Film Solutions Half Milk Crate Divider, would be the following. Bolt Film Solutions Half Milk Crate Divider 2 x Divider Plug Limited 90-Day Warranty

Q: 5. I have a sony alpha 7 aii. is these safe for the sensor?

A: Yes, this is a recommended sensor cleaning product for the A7 III.

Q: 6. Will this work on a Canon C500 Mk II?

A: Yes, the Photographic Solutions Sensor Swab ULTRA Kit (Type 3) has the correct swab size for the Full-Frame CMOS Sensor built in the Canon EOS C500 Mark II 5.9K Full-Frame Camera Body.

Q: 7. What are the dimensions of the Travel Pouch and will the Orbit Hepa Blower fit in the pouch?

A: The Photographic Solutions Sensor Swab ULTRA Kit's (Type 3) pouch is 6 inches tall, making it a little too short to contain the Photographic Solutions Orbit Hepa Blower (B&H # PHORBIT).

Q: 8. I have a Nikon Z7ii camera with a sensor that is 35.9mm x 23.9 mm. Safe to assume the 24mm version of this swab is not good?

A: The Photographic Solutions Type 3 ULTRA Swab Digital Survivor Kit is designed for full frame sensors such as the Nikon Z7II.

Q: 9. Is this the correct type swab for Super 35 sensors (I'm specifically using the Blackmagic Ursa Mini)?

A: Yes, our #3 Sensor Swab ULTRA (24mm) is the correct sizefor Super 35 vidcams.

Q: 10. What size type should I get for a Fujifilm x-t2?

A: The APC sensor size is (23.5 x 15.7 mm).Our Swab size for the #3 is 24mm, or roughly 1/2mm too wideand Just's #1 recommended size is for our 20mm swab, whichis 3.5mm too small.Personally, I prefer the swab size closest to the sensor size to getthe maximum coverage possible. When using the #3 - since it is a hairtoo large - you'll need to tilt the swab just a touch - such that itdoes not line up perfectly flush against the side of the sensor, but thetop edge is ever-so-slightly ahead of the bottom (or vice versa).