The Altman Pegasus 6 is a 2700K, white-output LED Fresnel with a 6" lens housed in a white enclosure, capable of operation in both mains dimmable and DMX systems. The fixture uses a 120W lamp and casts soft light similar to that produced by theatrical and studio Fresnels, achieving an output equivalent to that of a 500W incandescent fixture.

The Pegasus 6 is designed to seamlessly integrate into preexisting dimmer systems. When the unit is set to Mains Dim Control, it can plug directly into theatrical phase-cut dimmers and functions in both forward- and reverse-phase implementations, replicating the smooth dimming curves of similar incandescent fixtures. The fixture is designed to operate on both 120V and 230V dimming systems, with a voltage selector switch on the rear of the unit. This switch just applies to the operating voltage of the dimming system. The fixture itself has a universal, auto-sensing power supply capable of functioning between 120 and 240 VAC.

The fixture is also fully RDM (Remote Device Management) and DMX compliant. This allows for its use in a lighting system that uses both constant power (for phase-cut dimming) and DMX data control. Simply flip the DMX/Mains Dim switch on the rear of the Pegasus 6 to convert it into a DMX/RDM controllable unit.

It can be used with standard theatrical gels as well as with gels formulated for LEDs. The fixture is constructed entirely from metal and is made in the USA. It ships with a C-clamp, a color frame, a safety cable, and a powerCON power cable.

Lamp Wattage of 130W    Mains Dimmable or DMX Controlled    RDM Compliant    PowerCON and DMX In/Thru Connections    Variable Beam Angle: 15 to 85 Degrees    Beam Adjustment Knob    High-Resolution Digital Dimming    Fully Homogenized Beam    Life Expectancy of 50,000 Hours    Made in the USA

Easily integrates into preexisting dimming systems (both forward and reverse-phase)

Functions in constant power, DMX, and combination constant power/DMX systems

RDM compliant

DMX and powerCON daisy chaining

Variable beam angle: 15 to 85 degrees

50,000 hour life expectancy

High-resolution digital dimming

Fully homogenized beam

Works with standard theatrical gels and gels formulated for LEDs

High CRI (greater than 90)

Ships with a C-clamp, color frame, safety cable, and powerCON power cable

Made in the USA

Related Questions and Answers

Q: 1. Is this fresnel attachment compatible with GVM's new Pro monolight series? Like the 500, for example?

A: No, the GVM F40 Fresnel Attachment for LED Light Spotlight is designed for te following models and will not adapt to the pro line cob systems Compatible with PR, SD, and P8 series GVM lights GVM-PR150D GVM-SD200D GVM-SD-300D GVM-P80S-II

Q: 2. How does this light turn on if you can't plug into wall?

A: This light would require a switched cable to be attached to it or it would need to be controlled by a dimmer control board while plugged into a dimmer pack.

Q: 3. How many of these would I need to evenly light a 9' wide by 8' tall green screen?

A: It will depend on the positioning of the light and the power of the lamp used, but one light should be enough.

Q: 4. Will this fit in the Arri 300W or a Arri 150W?

A: It is for the 300w ARRI.

Q: 5. Will this work with the COLBOR 220W Bi-Color COB?

A: Yes, the GVM F40 Fresnel Attachment for LED Light Spotlight will mount and work with the COLBOR CL220R 220W RGB COB LED Video Light. Both of these products utilize the Bowens S mount.

Q: 6. Would this kit be sufficient to light a single person interview in a medium shot, or would this be better considered for use as specials, to create a lighting effect, as a catch light, or as a accent light, etc.?

A: It could work for that if you are wanting a hard light, your subject isn't moving, and the ambient light isn't overpowering. Typically that would be either indoors without strong backlighting. . . or possibly outdoors at night. Having said that, for the sake of versatility it would be more typical to use a more powerful light source with a softbox option such as this one: Genaray Torpedo Portable Daylight Focusing 3-LED Light Softbox Kit (BH #GEBLT603LSBK) https://bhpho.to/3wF9BRl

Q: 7. Have a bag ?

A: No

Q: 8. Is this compatible with the capture 600d?

A: No, the SmallRig RA-F150 Focusing Fresnel Lens for LED Monolights can physically mount to the Aputure LS 600d but the 600d requires a stronger fan.

Q: 9. Is this bowens mount or only for nanlight? Would it fit the godox mount on 60bi lights?

A: The Nanlite CN-18X Fresnel Lens for P-100 LED Light BH #NACN18X is specifically for the P-100 LED.

Q: 10. Is this NFPA 701 or B1/M1 certified?

A: The Airbooth Inflatable Photo Booth Enclosure has passed the test requirements of the NFPA 701 Test Method 1-2010 Edition: Standard Methods of Fire Tests for Flame Propagation of Textiles and Films and is NFPA certified.