The 10-pack of black ISO-MT-BK10 Long ISO Mount for Sanken COS-11 by LMC Sound is for mounting microphones. It is used in various environments for audio applications such as broadcast TV, film, theater, videographers, reporters, and more. It can be used as a necktie knot mount or wherever you need extra isolation from fabric or skin. The mic is held in place by tension on the mic shaft. Made of flexible rubber material and can be used multiple times.

For Film, Broadcast TV, Theater    Provides Isolation from Fabric or Skin    Made of Flexible Rubber

Use the ISO mount to keep adhesive residues off your lavs and on the mount

2 flat sides for easier mounting

ISO mount is extra thick around the microphone head

Related Questions and Answers

Q: 1. Can ISO-PUCK REPLACE Gaia for Stand mount speakers .?

A: thank you for your question. You are able to use this under a speaker on a flat stand mount or desk to decouple. make sure you have enough pucks to cover at least 4 corners of the speaker so that is does not tip over.

Q: 2. Has anyone tried using this with the RØDE Wireless GO lav mics?

A: These will work well. The Rode is a medium to small mic, so will fit nicely.

Q: 3. Will this work with the Audio Technica 4040 microphone?

A: Yes it will.

Q: 4. Will this fit a Sony ECM-VM1BMP lav?

A: The LMC Sound MTVPRBK C Mount Vampire Clip Universal Lavalier Mount is compatible with the Sony ECM-VM1BMP.

Q: 5. Will a Sennheiser MKE 2 fit in these?

A: It's a tight fit but I can verify that it works. Be aware that if you leave the MKE in there for an extended period of time, the RM-11 will stretch. Which is fine if you only have MKEs, but it can become too loose for Sanken COS mics.

Q: 6. Will the Microphone Madness MM-MSLM Omnidirectional MatchStick Lapel Microphone fit in here? If not, anyone know of something like this that will work?

A: Unfortunately, the Microphone Madness MM-MSLM's diameter is about 3.0mm, 1mm less than that of the Sanken Cos-11 and most microphones. The fit may be a bit loose. Currently, there isn't a known universal mount like the Sanken RM-11Bk that will fit the MM-MSLM lavalier.

Q: 7. Does anyone know if it will work with the sennheiser ME2?

A: The Vampire Clip opening is custom fit to the Cos-11 and it fits very tight. I do believe the Sennheiser ME2 is a bit wider, you need to check dimensions. The opening on the vampire clip is 4mm or 3/16

Q: 8. How do you mount these onto human skin or clothing. Two way tape?

A: The mount can be taped to the inside of clothing, with the mic head sitting on the shelf inside protected. You can adhere it to skin with medical tape, and place a piece of moleskin on the skin to avoid rubbing sounds.

Q: 9. Does this help to reduce rustling noise?

A: Yes this will help by acting as a shockmount keeping the microphone in place helping against vibrations that would cause noise.

Q: 10. Will this work with something like the Countryman EMW?

A: Yes, the LMC Sound CMTVPRBK C Mount Vampire Clip Universal Lavalier Mount should be capable of use with the Countryman EMW Omnidirectional Lavalier Microphone. Although compatibility is not specifically stated, the EMW has a 6.6mm measurement that is within the stated mic head size of 5-7mm compatible with the CMTVPRBK, and also has a similar form factor to other microphones stated as compatible such as the Tram TR50.