The 10-pack of white ISO-MT-WHT10 Long ISO Mount for Sanken COS-11 by LMC Sound is for mounting microphones. It is used in various environments for audio applications such as broadcast TV, film, theater, videographers, reporters, and more. It can be used as a necktie knot mount or wherever you need extra isolation from fabric or skin. The mic is held in place by tension on the mic shaft. Made of flexible rubber material and can be used multiple times.

For Film, Broadcast TV, Theater    Provides Isolation from Fabric or Skin    Made of Flexible Rubber

Use the ISO mount to keep adhesive residues off your lavs and on the mount

2 flat sides for easier mounting

ISO mount is extra thick around the microphone head

Related Questions and Answers

Q: 1. Will the Microphone Madness MM-MSLM Omnidirectional MatchStick Lapel Microphone fit in here? If not, anyone know of something like this that will work?

A: Unfortunately, the Microphone Madness MM-MSLM's diameter is about 3.0mm, 1mm less than that of the Sanken Cos-11 and most microphones. The fit may be a bit loose. Currently, there isn't a known universal mount like the Sanken RM-11Bk that will fit the MM-MSLM lavalier.

Q: 2. Does this have any latex in it?

A: Yes, the Sanken Rubber Mount for COS-11S Microphone RM-11 does contain latex.

Q: 3. Has anyone tried using this with the RØDE Wireless GO lav mics?

A: These will work well. The Rode is a medium to small mic, so will fit nicely.

Q: 4. Is there a fluffy/wind protection designed to attach to this to further decrease the chance of wind noise?

A: Because the Bubblebee Industries Lav Concealer for Sanken COS-11 covers the capsule of the Sanken COS-11 in its entirety, other than the small opening at the top, there is not a wind protection accessory designed specifically for pairing with the Lav Concealer. In theory you could affix the Bubblebee Industries Invisible Lav Fur Covers (BH #BUBBIILCF30) over the capsule for added wind protection as desired: https://bhpho.to/3P7sFAe

Q: 5. Will this work with the countryman B3?

A: It may not fit well. Use these: Remote Audio Foamies Foam Mounts for Lavalier Microphones (Set of 12, Black) B&H # REUFOAMIEB: https://bhpho.to/30nNvo3 Bubblebee Industries Invisible Lavalier Microphone Covers B&H # BUBBIILC30: https://bhpho.to/3l7sKop

Q: 6. Does this fit the sony utx-B03 lapel mic?

A: This mount will work with the mic that comes with the Sony UTX-B03 transmitter, which is the Sony ECM-V1BMP Omnidirectional Lavalier Microphone with Locking Sony 3.5mm Connector (Black), BH #SOECMV1BMP.

Q: 7. Are you able to close this packaging and save the rest of the unused film if you only have enough dark slides for 6 exposures?

A: The film sheets in the Film Photography Project Frankenstein 200 ISO Black & White Film (4 x 5", 25 Sheets) come with a protective plastic bag inside of the box.

Q: 8. Will a Sennheiser MKE 2 fit in these?

A: It's a tight fit but I can verify that it works. Be aware that if you leave the MKE in there for an extended period of time, the RM-11 will stretch. Which is fine if you only have MKEs, but it can become too loose for Sanken COS mics.

Q: 9. Can ISO-PUCK REPLACE Gaia for Stand mount speakers .?

A: thank you for your question. You are able to use this under a speaker on a flat stand mount or desk to decouple. make sure you have enough pucks to cover at least 4 corners of the speaker so that is does not tip over.

Q: 10. How do you mount these onto human skin or clothing. Two way tape?

A: The mount can be taped to the inside of clothing, with the mic head sitting on the shelf inside protected. You can adhere it to skin with medical tape, and place a piece of moleskin on the skin to avoid rubbing sounds.