200 Inch Diagonal Projector Screen

Da-lite 29206 Wireline Advantage 78 X 139" Motorized Projection Screen (120v)

Product Code: ga179675
Availability: In Stock

$89,778.00 $113,120.28

Qty

8 reviews Write a review

Description
Reviews (8)

Designed for large venues, the 120V 29206 Wireline Advantage 78 x 139" Motorized Projection Screen uses thin steel cables instead of black drop to lower the screen to an appropriate viewing height. Once the screen is installed, the screen's trim conceals the rough opening in your ceiling, eliminating the need to complete additional trim work. Sliding installation brackets help make it easy to attach the screen housing to the structure above the drop ceiling.

159" Diagonal / 16:9 Aspect Ratio HD Progressive 0.9 Surface 0.9 Gain / 170° Viewing Angle Suspended from Cable up to 29' Slim-Tab, Low-Profile Tab-Tensioning Hand-Held Remote Included Built-In Radio-Frequency Motor Seamless, Black-Backed Screen Surface

Key Specs
Front/Rear Projection	Front
Aspect Ratio	16:9
Diagonal	159.0" / 403.9 cm
Gain	0.9
Tensioned	Yes
Type
Series	WirelineAdvantage
Front/Rear Projection	Front
Aspect Ratio	16:9
Style	Wall and Ceiling
Dimensions
Viewing Area	78.0 x 139.0" / 198.1 x 353.1 cm
Diagonal	159.0" / 403.9 cm
Surface
Finish Name	HD Progressive 0.9
Gain	0.9
Viewing Angle	170 degrees
Tensioned	Yes
Black Backing	Yes
Controls
Motor	Standard
Included Controls	No
General
Voltage	120 VAC/60 Hz

Ideal for moderate to high output projectors, the light gray surface provides balance between color reproduction and image contrast. Cone: 170° Gain: 0.9

Up to 29' of cable to accommodate appropriate viewing height in rooms with high ceilings
Slim-Tab, a lower profile and stronger tab design to keep your screen taut
Tensioning Cable System to prevent warping and ensure even lateral tension
UL Plenum-rated case
Works with separately available radio-frequency control accessories such as a single-channel wall switch, dry contact interface, and RS-232 interface
Black-backed screen material for enhanced image quality and opacity
Seamless screen surface

Related Questions and Answers

Q: 1. What kind of battery could power this and how long would it last in between recharges?

A: I don't think this light is a good choice for mobile lighting. I would choose the torch L.E.D.

Q: 2. Is this light considered Flicker Free? I will be using a 300fps capable camera.

A: The Dedolight Universal Tungsten Spotlight without Cable - 100-150 Watts/12-24 Volts is not flicker free. At 300 frames per second your camera will introduce flicker.

Q: 3. Does this come with a stand and does it get hot at all?

A: no stand, yes it gets hot.

Q: 4. Will this work with the Sigma 18-35 Art lens?

A: Hello Kerry,It works perfectly on the Sigma 18-35 Art. I just received mine a few days ago. It's one of the best solution out there to transform your lens with appropriate follow focus ring.Cheers

Q: 5. Can this light be used without being plugged in?

A: Hi, no it's A/C powered only.

Q: 6. Can this take a 85w florescent bulb & can the reflector be swapped to the 12' thrifty reflector?

A: The Smith-Victor A50 5" Ultra Cool Light (120V) can not take an 85w fluorescent bulb. It will not The reflector is not interchangeable with a different size.

Q: 7. What size do I purchase for use with the Voigtlander Nokton 25mm f/0.95 Type II Lens?

A: Please go to this web page and print out this template to determine the diameter of the lens and the matching size LuxGear. http://bit.ly/2phHhl7

Q: 8. What is the scrim size for these units?

A: The lights in the Dedolight Master 3-Light Kit can use 3" scrims like these: https://bhpho.to/46kLMAC.

Q: 9. If I use this light at 20-30 feet away, should I buy 8 Leaf Barndoor Set with Gel Clips together? Are more accessories necessary for this light? Thank you so much!

A: Yes, absolutely. I rarely use this light without the barn doors and gel clips. Definitely needed to shape the light.

Q: 10. Will this gear function well with an Ikan Stratus follow focus?

A: Yes it will.

Dean	22/09/2024
This came with my purchase of the softbox it fits. What a sweet deal. 5

Art Video	07/09/2024
Even if you think you won't need one, you'll realize that you do and you don't have it on set. This grid is solid, made of a different material that's not the usual fabric, thus being more rigid, BUT, STILL as DELICATE as any other grid. To remove it, always grasp from the outside and never from the grid squares. Do this and you'll have these grids lasting for years. This particular softbox, I'm using for a backlight, hair light or anything that requires a small source of light to give a little punch, and the grid makes the 18 softbox even more controllable. [I have received this product in exchange for my honest review] 5

Robert	28/08/2024
Nicely made, works well and great for even a higher price point. 5

Robert	07/07/2024
Nicely made, works well and great for even a higher price point. The package deal of box + grid is hard to say no to for the quality you get. 5

Joseph	21/06/2024
This really helps keep the light contained when doing headshots where you want to keep the light from spilling onto the background. I would recommend this for getting a more low-key look. 5