These Shock Racks are lightweight, shockproof, watertight, dustproof, heat and chemical resistant, perfect for protecting and transporting your sensitive electronic equipment.
Molded of LMDP Linear Medium Density Polyethylene plastic that meets or exceed MIL-STD 810G standards and includes 8 elastomeric shock absorbers which allows a standard payload range of 40 to 150 pounds. Optional extended payload range of 160 to 300 pounds can be accommodated as a special order option. These 3RR Series Removable Racks are 30" deep from rail to rail with a standard 19" rack width per ANSI/EIA-310-C specification and feature square-hole rack rails to accommodate either #10-32 US standard, or 6mm International standard cage nuts which are supplied with the cases.
The rugged roto-molded shell ensures industry leading strength and impact resistance. The standard COTS (commercial off the shelf) case comes with a 2" deep front lid and a 5" deep rear lid to accommodate rack gear that is longer than 30", and edge casters to allow convenient case transport. Molded-in stacking ribs and lugs are designed to stack with competitive manufacturers cases. Black powder coated stainless steel hardware are recessed for protection is standard as well as 8 comfort grip spring loaded lift handles which allow for easy movement. An automatic pressure relief valve is another standard feature along with gasket sealed lids that include convenient lid hangers to store your lids when your equipment is in operation. Coupling straps are included for securing the racks together when stacked.

• Completely removable frame for access to bench integration
• Meets or Exceeds MIL-STD 810G
• Standard payload range 40 to 150 lbs
• Standard 19" Rack width per ANSI/EIA-310-C
• Standard Rack depth 30" rail to rail
• Square hold rack rails to accommodate either #10-32 US standard, or 6mm international standard cage nuts
• 2" front lid, and 5" rear lid with edge casters standard, other options available
• SKB's Rugged roto-molded shell ensures industry leading strength and impact resistance
• Molded in stacking ribs and lugs are designed to stack with competitive manufacturers cases
• Black powder coated stainless steel hardware (standard) which are recessed for protection
• 8 comfort grip spring loaded lift handles

Related Questions and Answers

Q: 1. Does this mount fit the threads on the Shure KSM 27?

A: The KSM 27 is not compatible with the Samson mount and requires a Shure part. The A27SM is the recommended mount for the KSM27.

Q: 2. does this fit a Blue Ember?

A: The Samson SP01 Spider Shock Mount will not fit a Blue Ember. The Samson spider mount is only for Samson condenser microphones.

Q: 3. Does this work with the Blue Yeti Nano?

A: No, the SP01 does not work with the Blue Yeti Nano. At this time, Blue does not offer a shockmount for the Yeti Nano and we do not have another shockmount by any manufacturer that we can confidently offer as a compatible accessory for use with the Yeti Nano.

Q: 4. does the Steady Arm Lightweight Mount Base Vertical Pole work with this? Could I also get some dimensions of the shock absorber.

A: The Steady Arm MINI Shock Absorbing Stabilizer can mount onto the Steady Arm Lightweight Mount Base Vertical Pole. Steady Arm does not list the dimensions of the shock absorber.

Q: 5. Does this fit the blue yeti blackout?

A: No, I would recommend the Blue Radius 2 found here:a href= http://www.bhphotovideo.com/c/product/1124943-REG/blue_4678_suspension_mount_for_yeti_yeti.html/pageID/accessory target= _blank http://www.bhphotovideo.com/c/product/1124943-REG/blue_4678_suspension_mount_for_yeti_yeti.html/pageID/accessory/a

Q: 6. Will this fit an Electro-voice RE20 Mic?

A: This shock mount will not hold the Electro-Voice RE-20 microphone. I would recommend the Auray SSM-BC10 Microphone Suspension Shockmount (Black Matte), B&H # AUSSMBC10.

Q: 7. Will this mount work with a Neumann U87?

A: This shock mount is made for specific Samson microphones. I would suggest using the appropriate shock mount, which is the Neumann EA87 - U87 Shock Mount for U87 Microphones (Nickle), BH #NEEA87.

Q: 8. I see a wire coming out of the bottom of this mount. Can snyone please tell me what it is?

A: That wire is about 6 feet long and is bare wire on the end. You use those wires to add the connector type needed for your application. In my case I added a XLR connector so a wireless transmitter could be used. That same connection could be attached to audio jacks built in to the floor that feed a sound system.

Q: 9. Does it funtion with the Samson G track Pro?

A: Hello, Thank you for contacting Samson Technologies. The SP04 Shock Mount will work with the G Track Pro microphone instead of the SP01. If you have any other questions or inquiries, please let me know at any time or email us at info@samsontech.com. Best Regards, James

Q: 10. Is there a compartment for laptops?

A: Although the Shape Camera Bag with Removable Pouches, does not have a compartment that is specifically intended for a laptop, a laptop could fit in the main compartment. We would suggest protecting the laptop with an appropriate laptop carry case / sleeve, while in the main compartment with camera gear.