You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

E-image Two-stage Aluminum Tripod With Gh03 Head & Tripod Dolly Kit (75mm)

E-image Two-stage Aluminum Tripod With Gh03 Head & Tripod Dolly Kit (75mm)
  • Product Code: ga179980
  • Availability: In Stock

$1,250.85 $1,663.63

The E-Image 2-Stage Aluminum Tripod with GH03 Head supports cameras and accessories weighing up to 11 pounds. The head and legs feature a 75mm ball/bowl, which provides a wide platform. The legs are made from aluminum and feature three sections with mono-lock leg locks. The mono-lock design allows you to lock and unlock each leg section using only one rotating locking lever. The tripod legs are height-adjustable from 26 to 61".


The GH03 head features an Easy Lock baseplate system that combines the balance adjustment of a sliding baseplate with the ease of a quick release system. Pan drag and counterbalance are both fixed, while tilt drag is adjustable via a dial on the side of the head. The head features a built in 1/4"-20 accessory socket for available monitor support arms or other accessory items. A padded carry bag with a shoulder strap is included.

GA752 Two-Stage Aluminum Tripod Legs    GH03 Fluid Head, 11 lb Payload    Lightweight Collapsible Tripod Dolly    26 to 61" Tripod Legs Height Range    Mono-Lock Leg Locks    Variable Drag and Fixed Counterbalance    Separate Pan and Tilt Locks    Mid-Level Spreader; Rubber Tripod Feet    Pan Handle    Padded Carry Bag with Shoulder Strap

General
Leveling Bubble/IlluminatedYes/no
Weight16 lb (7.3 kg)
Head
Load Capacity11 lb / 5 kg
Counter Balance SystemFixed
Quick Release/Wedge PlateEasy Lock System
Balance PlateEasy Lock
Tilt DragVariable
Tilt Range-60 to 90°
Tilt LockYes
Pan LockYes
Legs
Load Capacity88 lb / 40 kg
MaterialAluminum
Head Attachment Fitting75 mm bowl
Minimum Height26" (66.0 cm)
Maximum Height61" (155 cm)
Leg Stages/Sections2/3
Leg Lock TypeMono-lock, rotating lever
Spiked/Retractable FeetSpiked feet
Packaging Info
Package Weight14.5 lb
Box Dimensions (LxWxH)39 x 9 x 8"

The Easy Lock baseplate provides the balance adjustment range associated with a sliding balance plate while combining the ease of a quick release, as you can pop the camera (on the Easy Lock plate) into the top of the fluid head without having to support the camera while lining up the plate with the head. Easy to pop in, it stays secure until you release it, and you maintain the sliding balance adjustments.

The mono-lock design allows you to lock and unlock the three sections of each leg using only one locking lever. The rotating lever provides a robust clamp mechanism that secures the legs and prevents them from slipping once locked. The single lever on each leg allows you to quickly lock the leg height without having to use two levers, making for a quicker workflow and sparing you from bending down to open a bottom leg lock.

The legs feature dual-spiked feet that provide solid purchase in soft surfaces when the legs are spread wide or extended to full height.

The rubber feet attach to the spiked feet for working on delicate or hard surfaces.

The Easy Lock camera plate features a guided sled with a locating pin, and supports both 1/4"-20 and 3/8"-16 camera tie-down screws (included).

Related Questions and Answers

Q: 1. Is this tripod compatible with Canon XL2 standard definition camcorder?

A: Yes, that camera will have a 1/4 mount on the bottom that will allow the camera to be mounted onto this tripod.

Q: 2. Which E Image Handle will work with this tripod?

A: Comes with a standard extension handle...

Q: 3. does this item come with a pan handle or do you have to purchase it separately?

A: it comes with the pan handle

Q: 4. Hi, can I take the tripod head off and mount a varizoom solo jib in it? Would it hold?

A: This tripod has a load capacity of 17.6 pounds, while a Varizoom Solo Jib that is Carbon Fiber will weigh right around 7 pounds. If you keep the weight of the camera you are putting on it low this tripod will be able to handle the Varizoom Jib. The jib will also connect right to the tripod head, you would not need to remove it.

Q: 5. Will it accept a Manfrotto quick release plate?

A: Yes, it will. E-Image heads manufactured after August 2015 are compatible with Manfrotto plates. Those made before then are not.

Q: 6. I bought this a while back. The pan movement is always jerky at the start of the pan. Why is that?

A: For help trouble shooting your product please email us directly at askbh@bhphoto.com.

Q: 7. Does this tripod come with a bag with a shoulder strap?

A: Yes! Is a really good product 100% recomendable

Q: 8. How tall can you make this tripod including head?

A: This has a maximum height of 63 inches.

Q: 9. Can the head be removed if I want to replace it with another head and/or mount a slider on it?

A: Yes it can! I do so frequently to either use a different head or use the head of the tripod with another rig.

Q: 10. how much does this tripod weigh?

A: ok No problem 5.78 kilogram = 12.742 718 754 lb, lbs

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Edelkrone Flextilt Head V3

$447.00 $585.57

Smallrig Mini V-lock Battery Plate

$68.97 $101.39

Sirui B-00 Series Mini Ball Head (black)

$144.84 $194.09

Smallrig V-lock Assembly Kit

$134.97 $163.31

Lanparte V-lock Quick Release Plate

$326.70 $457.38

Products You May Like

Tiffen 49mm Graduated Blue Filter

$104.94 $162.66

Bose Power Supply For Tonematch Mixers

$165.00 $234.30

Hedler Maxisoft Softbox (28 X 28")

$1,407.00 $1,857.24

Wacom Dtu-1031ax 10.1" Pen Display

$1,557.00 $2,039.67

Rme Lni-2 Dc Low-noise Isolating Dc Filter

$1,947.00 $2,531.10