Max Distance Hdmi To Ethernet Adapter

Atlona 4k/uhd Hdmi Transmitter Over 100m Hdbaset With Ethernet, Control, And Poe

Product Code: ga180056
Availability: In Stock

$1,589.94 $2,178.22

Qty

0 reviews Write a review

Description
Reviews (0)

The Atlona AT-UHD-EX-100CE-TX is an HDBaseT transmitter for HDMI transmission up to 328 feet over category cable with Ethernet pass through, plus RS-232 and IR control. Designed to work with HDBaseT inputs on switchers and projectors, this extender transmits video signals up to 4K/UHD with embedded multi-channel audio. Additionally, the transmitter extends Ethernet, RS-232, and IR control commands. The AT-UHD-EX-100CE-TX features a quarter rack width metal enclosure for easy rack mounting with rear panel I/O ports for uncluttered wire management.

General
Device Type	Video/audio/infrared/serial extender
Form Factor	External
Networking
Connectivity Technology	Wired
Max Resolution	4096 x 2160
Max Transfer Distance	328 ft
Status Indicators	Power, link/activity
Features	Firmware upgradable, HDCP compliant, 4K resolution support, HDBaseT technology, CEC passthrough
Compliant Standards	HDCP 2.2
Expansion / Connectivity
Interfaces	1 x HDMI (output) - Type A female 1 x IrDA (input) - terminal block 1 x IrDA (output) - terminal block 1 x RS-232 - terminal block 1 x HDBaseT - RJ-45 1 x USB - mini-USB Type B 1 x network - RJ-45
Miscellaneous
Compliant Standards	CCC, FCC, RoHS, cULus, RCM
Power
Power Over Ethernet (PoE)	PoE
Power Device	External power adapter
Voltage Required	AC 120/230 V (50/60 Hz)
Power Consumption Operational	12 Watt
Dimensions & Weight
Width	4.3 in
Depth	3.5 in
Height	1 in
Weight	13.76 oz
Manufacturer Warranty
Service & Support	Limited warranty - 10 years
Environmental Parameters
Min Operating Temperature	32 °F
Max Operating Temperature	122 °F
Humidity Range Operating	20 - 90% (non-condensing)
Packaging Info
Package Weight	2.35 lb
Box Dimensions (LxWxH)	11.2 x 7.3 x 2.9"

4K/UHD capability
Allows protected content stream to pass between devices
Eliminates the need for remote power or power-injection devices
AV, Ethernet, power, and control over HDBaseT
Delivers 4K/UHD video, audio, 100Base-T Ethernet, power, and control through a single cable
Eliminates multiple cable runs between source, control system, router, and display
Rear panel I/O connectors for simplified wire management
Saves installation time and eliminates clutter
Multi-channel audio compliant
Allows any multi-channel audio stream to be used within a professional audio system
Front panel power and link status LEDs
LED indicators provide power and HDBaseT link status information
Provides easy setup and troubleshooting
Keeps devices out-of-sight when placed in public spaces

Related Questions and Answers

Q: 1. Hi, is the monitor housing made of aluminum?

A: No, the Desview U6 5.5" 4K HDMI Camera Control Monitor's housing is made of a hard plastic.

Q: 2. Does this monitor support different pages where a particular set of presets can be quickly selected like some other monitors, for example, page 1 has a clear view with no tools, page 2 has exposure tools enabled, page 3 has focus tools enabled, page 4 has another lut enabled, etc?

A: No, the Desview U6 5.5" 4K HDMI Camera Control Monitor does not offer page views like those found on SmallHD monitors.

Q: 3. Hi,I'm confused, do these items use sony or canon batteries, the picture says sony for both but the specs say canon for transmitter, or as I hope can you choose?Why would you have 2 different batteries??thanks,Nick

A: The transmitter uses a Canon LP-E6 battery plate and the receiver uses a Sony NP-F series battery plate.

Q: 4. Will this touch screen monitor control follow focus, ISO, record start/stop on Sony A1 via LANC?

A: No. The Sony A1 would not support LANC control when using the Desview U6 5.5" 4K HDMI Camera Control Monitor. We recommend: PORTKEYS LH5P II 5.5" Touchscreen Monitor with Camera Control for Sony a6000/a7/R II/a7S III BH #POLH5PIIS Control supported with the Sony A1 listed here: https://bit.ly/3SI1Kjg

Q: 5. Hello! Is it possible to transmit using 4 systems with 4 camaras?

A: When using the Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System, you could work with four kits of TX and RX in the same location. Please note that you will be limited to two sets if you are working in broadcast mode.

Q: 6. Will the Pyro S transmit continuously 24/7 if left on?

A: As long as the Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System is connected to power source the kit will continue to transmit.

Q: 7. To how many receivers and apps can the trasmitter transmit simultaneously. This is a question for Hollyland?

A: When the transmitter from the Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System is set to broadcast mode, the a single transmitter can output to up to four receivers and two smart devices running the app.

Q: 8. What is the difference between this one U6 and R6 version?

A: The U6 is an upgraded version of the R6. The R6 can only support up to 4K 30p while the U6 caps at 4K 60p. You can also power your camera via USB Type-C or DC input and can control the camera using the USB Type-C port for LANC control functions such as iris and focus on the U6.

Q: 9. What are the specs for the DC barrel plug adapter?

A: The DC 12 barrel port on the Desview U6 accepts a 2.1mm plug.

Q: 10. i bought Mars 400s but can not get output 59.94 does Pyro S 4k have that out put ?

A: The Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System can output 1080p59.94 via HDMI or SDI but is limited to a max 30 fps output in 4K via HDMI and cannot output 4K via SDI.

There are no reviews for this product.