The Lens Turbo Adapter V2 for Full-Frame Nikon F Mount Lens to Fujifilm X Mount APS-C Camera from Mitakon Zhongyi allows a full-frame, AI, post-AI, or G-type, Nikon F mount lens to be mounted onto a Fujifilm X mount camera. While doing so, the adapter approximates the lens's angle of view as if it were placed directly on a camera with a full-frame sensor while providing a 1-stop increase over the lens's aperture range.

If a lens intended for 35mm film or similarly-sized "full-frame" camera sensors is connected to a camera with an APS-C sized sensor, it would project an image larger than the smaller sensor was built to accept. Able to capture only the center portion of the projected image, the effective angle of view of the lens would be narrowed, creating an in-camera "crop factor". The Lens Turbo Adapter V2 for full-frame Nikon F Mount Lens to Fujifilm X Mount APS-C Camera condenses the light from a lens designed for 35mm film or "full-frame" camera sensors and projects it onto the APS-C sensor. This allows the APS-C sensor to utilize more of the light gathered by the lens, which effectively eliminates the crop factor while making available to the sensor an additional 1 stop of light for each of the lens's f/stop settings.

This adapter is constructed from aluminum and plastic for durability while minimizing weight and its mounting rings are made of stainless steel to further prevent wear-and-tear. Inside are four lens elements, one of which is an extra-low dispersion element that helps to reduce chromatic aberrations.

When using the Lens Turbo Adapter V2 for full-frame Nikon F Mount Lens to Fujifilm X Mount APS-C Camera, a lens placed on it is kept securely attached via a push-button, side-locking knob. This adapter does not support electronic communication between an attached camera and lens. In order to control the aperture of G-type Nikon F-mount lenses, this adapter has a physical aperture control ring that can be used to open and close down the aperture of the lens.

This adapter may not fit all Nikon F mount lenses due to the degree with which rear optics may extend past the lens mount. Lenses with rear optics that extend more than 3mm past the lens mount are not recommended for use with the Lens Turbo Adapter V2 for full-frame Nikon F Mount Lens to Fujifilm X Mount APS-C Camera, and Blackmagic cinema cameras are incompatible as well.

Nikon F Lens to Fujifilm X Body    Full-Frame Lens to APS-C Camera Body    Full-Frame Lens Angle of View with APS-C    1-Stop Increase in Lens Apertures    4 Optical Elements    Extra Low Dispersion Lens Element    Locking Mechanism to Secure Lens    Push-Button Lens Release    Stainless Steel Mounting Rings    Compact and Lightweight Design

• Allows a full-frame frame, AI, post-AI, or G-type, Nikon F mount lens to be used with a Fujifilm X mount camera
• Combination of adapter and full-frame frame, AI, post-AI, or G-type, Nikon F mount lens provides approximately the same angle of view with a Fujifilm X mount camera as if lens were placed on a full-frame sensor camera
• Provides a 1-stop increase for the camera over the lens's aperture range
• Aluminum and plastic components for durability and weight reduction
• Stainless steel mounting rings further prevent wear-and-tear
• Side-locking knob for secure attachment of lens

Related Questions and Answers

Q: 1. I have the following Zeiss ZE lenses:25 f235 f250 f1.421 f2.8100 f2135 f2.Will all these lenses work with the Fujifilm X-T2 using this adapter? Any loss of sharpness and image quality?thank you

A: Mitakon Zhongyi Lens Turbo Adapter V2 for Full-Frame Canon EF Mount Lens to Fujifilm X Mount APS-C Camera will work well with the lenses listed. Using the adapter could add a little distortion on the edges, but starting with such great lenses will make it not noticeable.

Q: 2. Does this adapter allow nikon lenses to autofocus?

A: No, this adapter is a manual focus adapter.

Q: 3. Will this work with the KIPON Baveyes 0.7x Mark 2 Lens Mount Adapter for Nikon F-Mount, G-Type Lens to FUJIFILM X-Mount Camera? The lens has an extended white cap that goes over the mount -- just wondering if this lens would extend too far to be used.

A: either use one or the other

Q: 4. Will this work with old manual focus Nikon lenses on a Fujifilm X100VI camera?

A: No, the FUJIFILM X100VI Digital Camera is a fixed lens camera, you cannot use a lens adapter with it. You would be able to use it on a different X-mount body.

Q: 5. Is this compatible for Canon L lens with Fuji XE2 body?

A: Yes, this adapter will allow you to put a Canon L lens onto your Fuji camera.

Q: 6. Hello, Is this compatible with the Fujifilm X-Pro2? Appreciate the advice, thanks!

A: Yes it is. Make sure that 'SHOOT WITHOUT LENS' is enabled on the camera.

Q: 7. Does this work for a Helios-44-2 lens?

A: The Mitakon Zhongyi Lens Turbo Adapter V2 for Full-Frame M42 Mount Lens to Fujifilm X Mount APS-C Camera will work with a Helios 44-2 lens with an M42 lens mount.

Q: 8. This adapter is OK for old NIKKOR lens on NIKON FM body for my new Fuji X-T20 camera ?

A: It should be OK except that some lenses might not fit for infinity as the rear lens element, if protrudes too much, might hit the Lens Turbo II lens.For example Super Takumar f/1.4 50mm cannot reach infinity with LTII M42 to FujiX.Same Takumar with Canon adapter will hit the lens of the LTII Canon to FujiXRollei Planar f/1.8 50mm with Canon EOS Mount will also hit the LTII glass...So you have to check how much your lens protrudes when set to infinity. It should be less than 3mm from original lens flange.

Q: 9. I read elsewhere that this dosn't fit the Fuji X-T2. Don't know why that would be when it works with other X-mount cameras, but I want to doublecheck. Does it work with/fit the X-T2?

A: This lens adapter does work correctly with the XT-2.

Q: 10. Does it focus to infinity ?

A: For example these two lenses hit Lens Turbo II before reaching infinite:- Super Takumar f/1.4 50mm, with M42 to Fuji X LT II- Rollei Planar f/1.8 50mm, with Canon Mount on Canon to FujiX LT II