The Mamya 645 Lens Adapter for Vizelex Rhinocam from FotodioX is capable of creating the dramatic panoramic and full 645 medium format images previously reserved for photographers working with expensive medium format back cameras. It is suitable for landscape, commercial, and architectural photographers. With an interchangeable lens mount, RhinoCam couples with a Mamiya 645 medium format lens with a Sony NEX series camera. The built-in composition screen enables photographers to preview the composed shot.

RhinoCam also mounts directly onto a 4 x 5 board to open up additional possibilities with wider angle lenses, tilt shifts, bellows systems, and more. After the capture process, it takes seconds to merge the multiple exposures into one larger image using automated stitching functionality built into recent versions of Adobe Photoshop and other software offerings. RhinoCam images are finalized using the more accurate flat stitching method, avoiding the perspective errors and curvilinear distortion present in images joined via spherical stitching (often found with motorized systems that move both camera body and lens). The result is a panorama or 645 medium format photograph that is well over four times the normal resolution of a high-end full-frame 35mm camera sensor.

M645, M645J, 645 Super, 645 Pro/-TL, 645E, 645AF, 645AFD (I, II & III)

Related Questions and Answers

Q: 1. IS this compatible with Mamiya M645 manual focus lenses?

A: Yes, the FotodioX Mamiya 645 AF/AFD Lens to Nikon Z-Mount Camera Pro Lens Adapter can be used to adapt Mamiya 645 manual focus lenses.

Q: 2. This adapter works on ARRI ALEXA Classic?

A: Yes, if your Arri Alexa Classis has a PL lens mount, the KIPON Baveyes M645-PL 0.7x Adapter will work with your camera model.

Q: 3. Mamiya 645 Lens covers the full frame on the A7S II with this adapter?

A: Hi Dave,I did some tests on the A7R; A-900; Nikon D700. As you know - all of these are FF. The Mamiya 645 with this adapter covers approx. 156% of the sensor. You will experience ZERO light fall-off, even when fully stopped down (at highest f-stop). Mamiya 645 lenses are fantastic - so enjoy - it opens up a totally new world of excellence. If I may - just one word of sound advice. Due to the resolving power of the lens, and the high pixel density of the sensor, I advise that ALL shots with 645 lenses are done using a sturdy tripod. Even at high speeds, getting a pin sharp photo is VERY challenging. During 2015, I've done approx. 12000 shots with my 645's, with in excess of 90% on tripod. Of these, the rejection rate is approx. 7%.Kind regardsJohannes van GraanCenturionSouth Africa

Q: 4. Can I use this adaptor with the Leaf Aptus-ii back on Ebony 4x5 camera?

A: Technically if the Ebony 4x5 camera which I am unfamiliar with has a Graflok Rear Standard a Leaf Aptus II back for Mamiya 645 will attach.

Q: 5. Will this adapter work with manual 645 lenses !?

A: The correct adapter for your 645 manual lenses is: FotodioX Adapter for Mamiya 645 Lens to Sony NEX Mount Camera BH #FOPNEXAM645 • MFR #M645-SNYE-PRO https://www.bhphotovideo.com/c/product/994963-REG/fotodiox_m645_nex_p_adapter_for_mamiya_645.html You can attach this adapter as well but you will be paying almost twice as much for it because the integrated control ring allows aperture adjustment on AF lenses. Mamiya MF lenses already has a built in aperture ring.

Q: 6. What is the effective mm of the lens when converted to the L mount?

A: The, KIPON Lens Mount Adapter for Mamiya 645-Mount Lens to Leica L-Mount Camera does not change the focal length of the lens. It does not have optics to change that. The crop is that the lens is for a 645 size frame and that to full frame camera is about 1.6 times crop.

Q: 7. Can you attach this adapter to a tripod?

A: The KIPON Mamiya 645 Lens to Nikon Z Mount Camera Adapter does not have a tripod mount.

Q: 8. will this adapter work with the Mamiya 35mm f3.5 AF (auto focus) lenses?

A: The FotodioX Pro TLT ROKR Tilt-Shift Lens Mount Adapter for Mamiya 645-Mount Lens to Fujifilm G-Mount GFX Camera will work to physically mount the Mamiya 645AF 35mm F3.5. However, you will not have any aperture control with this setup, and focusing would be done manually.

Q: 9. I read the answer about the iq250, however would this also work for the IQ180? Remember the IQ180 has a larger sensor, so just curious if it will still work. Thank you for the previous answer as well, Ill definitely be getting the cables you recommended. IQ180 compatibility?

A: Yes , the FotodioX Pro Mamiya 645 Large Format 4x5 Adapter will work with the IQ180 as well.

Q: 10. Can i use Phase One IQ250 back of my Phase One DF+ camera on a Cambo 4x5 with Graflok with this adapter ?

A: Yes, the FotodioX Pro Mamiya 645 Large Format 4x5 Adapter would be compatible to allow you to attach the Phase One IQ250 digital back to a large format camera. I contacted Mamiya/Phase One and they state there are a couple different ways to use the Phase One IQ250 on a large format camera:1) Set the back into Shutter Latency in where the back is always on and ready to accept a Capture. You can shoot at anytime. The drawback is that the battery wears down faster and it can build up heat. The following cable would be needed for this usage:Mamiya Multi-Connector to Lens Sync Cable (Coiled, 15.7 ), B&H # MAMCLSCL or,2) Set the back to Normal in the Shutter Latency menu. However you will need a a Wake up Cable This cable has a small button that literally wakes up the back electronically for approx. 2 seconds. In that window you expose the image. The drawback is its an added step to expose the image. And if you dont do it in the right sequence, you misfire and need to reset. Two cables are needed for this option:Mamiya Wake-Up Cable, B&H # MAWUCCDBMamiya Multi-Connector to Mini Jack Female Adapter Cable (4.7 ), B&H # MAMCMJFCAC