The black HDL10-A Active Line Array Module from RCF is designed for use in live sound reinforcement and installed situations. The system is powered from a 1400W peak power two-way digital amplifier (400W for the HF and 1000W for the LF), and sound is processed from a powerful DSP. The system features two 8" low-frequency transducers with a 2" voice coil for a solid bass reproduction, and a large-format 2" compression driver to deliver vocal clarity and high definition. The custom-designed waveguide allows a coverage of 100 x 15°, whilst also delivering linear high-frequency response.

The ND 640 compression driver's 2.5" voice coil allows a crossover point of 800 Hz, which allows a wide vocal range to be produced by this driver. The DSP also includes presets for indoor/outdoor usage and highly curved arrays.

The back-panel controls allow a number of simple optimizations to be carried out: two possible HF settings, four possible cluster configurations, an EQ setting for high-curved configurations, and an Indoor Correction EQ. A volume knob allows to set the overall volume of the speaker, according to its application. This unit provides Power, Signal, and Status LEDs for monitoring the system.

The HDL10-A features configurable mechanic; angles between cabinets are selectable with 2° resolution and allow the system engineer to create J-shaped or spiral arrays. HDL10-A cabinets are molded on a polypropylene composite material designed to dampen-down vibrations, even at maximum volume settings. The module is equipped with two aluminum side handles with a rubber handgrip for portability. The system is equipped with a heavy-duty fly bar. The steel construction mechanics make it possible to fly up to 16 modules in daisy chain manner.

Open Box Products Have a Limited 1-Year Manufacturer Warranty    Compact Line Array Element    1400W Peak Power    133 dB Max SPL    65 Hz to 20 kHz Frequency Response    Dual 8" Woofers + 2" Compression Driver    DSP Controlled Input Section    Includes Presets    Tour-Grade Safe and Solid Mechanics    Composite PP Enclosure with Wood Bracing

• Provides up to 1400W of power (700W RMS)
• Two 8" woofers
• One 2" compression driver
• DSP controlled input section with selectable presets
• Tour-grade safe and solid variable mechanics
• Wooden reinforced composite PP enclosure

• Live sound
• Rental
• Portable PA, clubs, ballrooms, and live theatre
• Theme parks
• Music playback and sound reinforcement in small and midsize venues
• Corporate A/V professionals and sound system hire companies

Related Questions and Answers

Q: 1. Is it LAP or LA? PLEASE use accurate and consistent language in your writeups, be it in the specs or overview or header! Pleas

A: The JBL VRX932LAP Dual Powered 12" Line Array Loudspeaker Kit with with Case and Cables includes two of the JBL VRX932LAP 12" Powered 2-Way Line Array Loudspeaker Systems (B&H # JBVRX932LAP).

Q: 2. Has anyone used these with SRX828SP subs? Any reports? What’s the ideal sub to 906LA ratio?

A: This is a subjective situation and the answer will be based on the application, size of the room, the style of music, as well as the volume that it will be played at through the system. Please contact us directly by phone or through live chat and give us a bit more information about the application and how the system will be used so we can provide you with the appropriate advice.

Q: 3. How many volts is the AC power input? 110 or 220V?

A: The RCF NX15-SMA available here at B&H is 115VAC compatible only.

Q: 4. Want to replace Bose tall colum speakers with the Toa Array in a old Catholic church app. 160ft throw using a Crown CDI 1000 at 70 volts. will 2 do it or do I need 2 more to carry to the back of the church?

A: Two of these speakers will not carry all the way to 160', you may need two more half way in the church. if you have a layout for the church, please send it over to this e-mail, I will get you a design for the system, also did you think about Subs for the system? naji@nfscom.com

Q: 5. As I am not familliar with these array speaker. are they set up to say use in a church the top speaker would get more power to reach the back of the curch the next one leass power to reach mid osf church an the low ones to have less power from Crown CDI 1000 at 70 volts to reach the front of the church. just asking?

A: This speaker have one input, audio is distributed across all element equally, the shape and the articulation of the speaker help disperse the audio vertically from 0 to 60 degrees, but will not give different power to each element. they are all equal. if you want to use a 70V amp, you will need the MT-200 to each one, it is a 200Watt 70V transformer. TOA have multichannel Amps as well, for example if you want to use 70V you can use the DA-250DH, it is a dual channel 250W per channel, it can cover two speakers.

Q: 6. Has anyone ever put casters on the bottom of these? Is that feasible?

A: there are no caster wheel attachments on this subwoofer, however, you can order the wheeled base: https://www.bhphotovideo.com/c/product/1356751-REG/rcf_ac_kart_hdl6_heavy_duty_steel_cart.html

Q: 7. ARE CASES INCLUDED?

A: A carry bag is included with the Bose L1 PRO32 Portable Line Array Speaker System with Bluetooth.

Q: 8. What is the total height of this from bottom to top?

A: SUBWOOFER PHYSICAL Height 2350 mm (92.5”) Width 350 mm (13.77”) Depth 450 mm (17.71”) SATELLITE PHYSICAL Height 501,2 mm (19,73”) Width 113,9 mm (4,48”) Depth 120,5 mm (4.74”) ENTIRE SYSTEM PHYSICAL Minimum height of the system 1974 mm (77,7”) Maximum height of the system 2284 mm (89,9”) Net weight 24,4 Kg (53,8 lbs)

Q: 9. Can you stream music via Bluetooth?

A: Yes

Q: 10. Can I use this on a 70v amp like the JBL CSA 1300z?

A: The JBL CSA 1300Z Single-Channel 300W Amplifier can operate at 8 ohms, so you can use it to power one JBL CBT 70J-1 Line Array Column Loudspeaker.