Digital Cable Antenna Signals In My Area

Link Electronics 4x1 3g/hd/sd-sdi Asd Switcher With Gpi Option

Product Code: ga180278
Availability: In Stock

$5,133.00 $7,442.85

Qty

0 reviews Write a review

Description
Reviews (0)

The 4x1 3G/HD/SD-SDI ASD Switcher with GPI Option from Link Electronics is a four-input video switcher that provides a convenient, low-cost way to route high definition and standard definition serial digital signals. This switcher is compatible with 270 Mb/s, 1.5 Gb/s, and 3 Gb/s serial digital interface signals. It can also be used for ASI and SMPTE 310M (19.4 Mb/s) signals, and the reclocking will be automatically be turned off. This switcher automatically equalizes the incoming SDI signal, compensating for greater than 1,000‘ of cable at 270 Mb/s, greater than 250’ of cable at 1.485 Gb/s, and greater than 100’ of cable at 2.97 Gb/s. The signal is then reclocked, with automatic rate detection for all popular data rates. The LEDs on the front panel indicate the data rate of the output video.

This multi-definition SDI 4x1 video switcher is capable of equalizing and reclocking all common serial digital signals, since it supports both standard and high definition signals. This makes it suitable for any application. The switcher’s versatility is illustrated by its ability to switch from SD to HD, SD to 3G, HD to 3G, and vice-versa. Another feature of this switcher is its ability to vertical interval switch when the inputs are synchronous. Vertical interval switching means that the switching takes place in the vertical interval of the video and therefore no glitch is seen in the active area of the video.

The 4x1 3G/HD/SD-SDI Switcher is a 1 RU chassis that is housed in the same case as the well-accepted 700 series. A black front panel distinguishes between the two series. Three 500 or 700 series can be mounted in the PRT-700 rack tray (sold separately).

Serial Digital Interface Input
Number of Inputs	4 x SDI
Connectors	BNC
Impedance	75 Ohms looping
Data Rates	270 Mb/s, 1.48 Gb/s, and 3 Gb/s
SMPTE	259 M, 292 M, and 424 M
DC Offset	0.5 V Maximuum
Signal Level	800 mv ± 10%
Input Cable Length	SD at 270 Mb/s: 1,000.0' (304.8 m) HD at 1.485 Gb/s: 250.0' (76.2 m) 3G at 2.97 Gb/s: 100.00 (30.48 m)
Serial Digital Interface Output
Number of Outputs	1 x SDI
Connector	BNC
Impedance	75 Ohms
Format	Follows input
Signal Level	0.800 mVpp ± 10%
DC Offset	± 100 mV
Jitter	5% Jitter improvement Additive Jitter: SD at 270 Mb/s: 16 ps pp, Typical HD at 1.485 Gb/s: 20 ps pp, Typical 3G at 2.97 Gb/s: 22 ps pp, Typical
Rise / Fall time	HD: 220 ps Maximum SD: 800 ps Maximum
Front Controls & Indicators(H)
Input Selection	Four momentary switches with LEDs
Lock	Re-Clocker Locked: Bi-color LED
Detectors	SD Rate Detect: Green LED HD Rate Detect: Green LED 3G Rate Detect: Green LED
Environmental
Ambient Temperature	32 to 122°F (0 to 50°C)
Humidity	0 to 90% Non-condensing
Power	5 W
Voltage	5 VDC Adapter Voltage: 100 to 240 VAC, 50 to 60 Hz
Mechanical
Dimensions	1.0 x 5.5 x 9.3" (2.5 x 14.0 x 23.5 cm)
Weight	1.5 lb (0.7 kg)
Packaging Info
Package Weight	3.43 lb
Box Dimensions (LxWxH)	14 x 12.4 x 6.6"

Supports 3G/HD/SD A&B SDI

Automatic equalization

Automatic reclocking

Vertical interval switching with inputs in sync

Input rates from 270 Mb/s to 3 Gb/s

ASI and SMPTE 310 compatible

Signal locked LED

Passes embedded audio

Rate-detect LEDs

Related Questions and Answers

Q: 1. Does the ATEM SDI Pro ISO have the ability to stream to more than one platform at a time?

A: The Atem Mini and Extreme models stream to one destination only. You could use services like restream.io to stream to multiple destinations.

Q: 2. Does it switch embedded audio over SDI?

A: Audio embedded in the SDI signal can be switched with the Blackmagic Design ATEM SDI Pro ISO Switcher.

Q: 3. Does this monitor flip image? Can I display the image that I flip on this monitor on another regular monitor via HDMI? Does this monitor have an output via HDMI to another monitor with all visual functions configured? How many full HDMI output is this monitor?

A: Yes it can flip the image no it can not flip the output it has 1 HDMI output that will pass through whatever signal comes into the monitor.

Q: 4. What D/S key capability does this unit have?

A: The Blackmagic Design ATEM SDI Pro ISO Switcher downstream Keys are Luminance keys. The SDI Pro ISO has one DSK.

Q: 5. Can I input hdmi and output sdi?

A: No it can not.

Q: 6. Does it allow 4K 60?

A: No, the FeelWorld P7S 7" 2200 cd/m² Full HD 3G-SDI/4K HDMI On-Camera Aluminum Monitor can only support DCI 4K at 24p and UHD 4K at 30p, 29.97p, 25p and 23.98p.

Q: 7. Can the DC Out power an ATEM Mini Pro switcher? If so, what power coupler should I get?

A: No it can not. the ATEM Mini Pro requires 12VDC this monitor only provides 8. it does not send enough power for the ATEM Mini Pro.

Q: 8. Are you able to adapt either SDI output into HDMI? In previous models, the HDMI out couldn't be adapted into anything else when connecting to a monitor.

A: Yes, you can adapt SDI to HDMI. Use the Blackmagic Design Micro Converter SDI to HDMI 3G (with Power Supply). BH #BLCMCSH3WPSU

Q: 9. Is the 2200 cd/m peak or sustained? And you mentioned in another answer it has image flip, does it have both horizontal and vertical flipping?

A: 2200 peak brightness. Yes it can flip both vertically and horizontally.

Q: 10. Is it possible to use a laptop for multi view out somehow so an extra monitor is not needed?

A: Unfortunately the Multiview output is only sent via the HDMI output and would not be transmitted to a computer via USB.

There are no reviews for this product.