4 Conductor Headphone Wire

Aiphone 871802 Two-conductor Non-shielded Wire - For Aiphone Intercom Systems (500')

Product Code: ga18034
Availability: In Stock

$344.85 $486.24

Qty

4 reviews Write a review

Description
Reviews (4)

The 500 foot 871802 Two-Conductor Non-Shielded Wire from Aiphone is a 2-conductor, 18 AWG, non-shielded bulk cable, and is technically matched for use with the company's intercom systems. Utilizing the correct cable helps ensure proper system performance.

2-Conductor 18 Gauge Solid Bare Copper Foamed Polyethylene Insulation Non-Shielded Grey Jacket

Parameters
Conductor	18 AWG Solid Bare copper
Insulation	Material: Color-coded polyethylene Wall Thickness: 0.010"
Assembly	Pairs Lay Length: 3.0"
Jacket	Material: Polyvinylchloride Wall Thickness: 0.015" Diameter: Nominal 0.152" Color: Natural Weight: 9 lb (4.1 kg) Ripcord: Yes
Electrical Characteristics	Capacitance: 11.05 pF/ft D.C. Resistance: 6.385 Ω per 1000' (305 m) @ 68°F (20°C)
Packaging Info
Package Weight	10.85 lb
Box Dimensions (LxWxH)	12.1 x 11.8 x 8.5"

Manufactured in accordance to UL standard 444, NEC listed Type CM & UL standard 14, NEC listed type CL3 & UL standard 1424, NEC listed type FPL C(UL) 60 °C California State Fire Marshall Approved

Suggested working voltage: 300V

Related Questions and Answers

Q: 1. where do i find the installation instructions?

A: The installation manual can be found at the following link: http://bit.ly/1kFmsgG

Q: 2. can additional stations be added to the system?

A: The Aiphone JOS-1V system can be expanded from one indoor and one outdoor station to two indoor and one outdoor station. The expansion indoor station is the Aiphone JO-1FD, a href= http://bhpho.to/1B4mG5r target= _blank http://bhpho.to/1B4mG5r/a

Q: 3. Is it possible to remove the looping in the 4W interface? So that the signal only goes to the 2W?

A: The Hollyland 2/4 Wire Converter for Intercom Systems does not provide any controls for alternate routing, but users experiencing issues with echoing or feedback can utilize the Auto Null button.

Q: 4. will this work to connect Riedel Bolero (4W NSA-002A) to Clear Com MS-702 ?

A: The Hollyland HL-2/4 is compatible with ClearCom systems, but compatibility is not explicitly stated for Riedel intercom units.

Q: 5. Will this work to connect hollyland t1000 to portacom com-40fc?

A: Yes. The Hollyland 2/4 Wire Converter for Intercom Systems BH #HO24WCONVERT will connect a Hollyland T1000 to a Portacom Com-40FC?

Q: 6. Since cannot be used to get live sound to the headphones (ie via Comtek) - how would one go about connecting audio into a hub?

A: The Hollyland 2/4 Wire Converter for Intercom Systems is an interface that is used to connect two intercom HUBs base stations. The exact setup will depend on which two HUBs that you are going to be using together. However, the 2/4 Wire Converter is not intended for sending live sound into headphones. It is used for interconnecting intercom systems.

Q: 7. Can two outdoor camera doorbell stations be used?

A: This system can only support 1 outdoor station. For 2 outdoor stations, the JF Series is recommended.

Q: 8. Can I use the same wiring I use for my old Aiphone MK-1HH?

A: The Aiphone JOS-1V Hands-Free Color Video Intercom System BH #AIJOS1V will use a basic two-wire parallel cable as recommended for the Aiphone MK-1HH.

Q: 9. Will this work with an RTS or Telex system?

A: Yes, the Hollyland 2/4 Wire Converter can be used with RTS or Telex systems.

Q: 10. What else is needed to patch a T1000 wireless kit into a wired ClearCom system?

A: Hi Ryky, you need a 2/4 wire converter by Hollyland. https://www.bhphotovideo.com/c/product/1592147-REG/hollyland_hl_2_4_wire_converter_2_4_wire_converter_for.html

wrlockwood	06/08/2024
We were replacing a defective door phone. the install was quick and easy and the phone worked like a charm. In a digital world, analog does not always work well. This one did. 5