Timecode Systems SyncBac PRO Timecode Sync System for GoPro HERO4 connects to the HERO4 Bus of your HERO4 Black or HERO4 Silver and allows you to embed timecode into the metadata of your GoPro footage. You can outfit multiple GoPros each with their own SyncBack Pro, and wirelessly sync the timecode between them over the 865 to 923 MHz frequency band.

The SyncBack PRO connects directly to your camera via the HERO Bus 30-pin connector port so there are no cables to lose and the small size allows you to use standard HERO4 BacPac backdoor housings (housings not included). Utilizing optional accessories allows you a variety of options to control your GoPro camera and integrate it into a professional multi-camera shoot without requiring slating for sync.

Embeds Timecode Into Camera's Metadata    Timecode Sync Multiple GoPros    Operates Over 865 to 923 MHz RF    Attaches to HERO Bus 30-Pin Port    Cable-Free Connection to GoPro    Compatible with HERO4 Standard BacPac    Optional Accessories Expand Capabilities

Mounting one SyncBac PRO onto each HERO4 allows you to timecode sync multiple cameras via long range wireless RF. Choose one GoPro/SyncBac Pro to be the master unit and timecode sync unlimited GoPro slaves.

The SyncBac PRO enables your HERO4 Black/Silver to integrate into a Timecode Systems production workflow. This means they can wirelessly timecode sync with any professional camera and audio equipment using a :pulse, :wave or :minitrx+ unit for timecode.

B:LINK Hub is integrated into the :pulse (not included). SyncBac PRO users can remotely control and monitor multiple HERO4 cameras from any smartphone (iOS or Android), tablet, Mac, or PC when connected to the B:LINK Hub dashboard via a :pulse.

The SyncBack PRO uses long range 865 to 923 MHz RF for communication and control.

It incorporates an internal battery that will last approximately 12 hours of use per charge.

The form fitting design matches your GoPro for a seamless appearance that allows you to use standard GoPro BacPac housings.

Related Questions and Answers

Q: 1. Can I jam from a tentacle product to the BLUE? Or do I need a ONE?

A: The Atomos UltraSync BLUE Wireless Timecode Sync for AtomX SYNC and Ninja V does not communicate with the Tentacle Sync E mkII Timecode Generator with Bluetooth 5.0 (Single Set). The Atomos UltraSync ONE RF Timecode Sync for AtomX Sync and Ninja V can be used with the Atomos UltraSync BLUE Wireless Timecode Sync for AtomX SYNC and Ninja V when paired with the Atomos CONNECT Network, Wireless & SDI Expansion for NINJA V/V+.

Q: 2. Can this pair with JUST the ultrasync one?

A: Yes, the Atomos UltraSync BLUE Wireless Timecode Sync for AtomX SYNC and Ninja V can pair with the Atomos UltraSync ONE RF Timecode Sync for AtomX Sync and Ninja V.

Q: 3. Does the SYNCBAC PRO's built-in battery also feed power to the GoPro?

A: Unfortunately no. The 12 hour power supply will remain within the Timecode system.

Q: 4. Can this be connected to a Red DSMC2 Gemini? I want to use the Zoom F3 Audio Recorder, but it is only Bluetooth.

A: Typically, the Atomos UltraSync BLUE Wireless Timecode Sync for AtomX SYNC and Ninja V (B&H# ATOMSYBL01US) would be connected not to the camera but to an external recorder such as a Ninja V with the Atomos AtomX SYNC (B&H# ATOMXSYNC1) addition for recording the video as it does not communicate directly with the camera. An example of a compatible device with a connection option to a camera would be the Atomos UltraSync ONE RF Timecode Sync for AtomX Sync and Ninja V (B&H# ATOMSYON01US): https://bhpho.to/3lgMUOW

Q: 5. Will this work with Sony FX3?

A: The Atomos UltraSync BLUE Wireless Timecode Sync will require Bluetooth which is not supported by DSLR/Mirrorless cameras at this time. Please choose the Ulrasync One which would support the Sony FX3. Atomos UltraSync ONE RF Timecode Sync for AtomX Sync and Ninja V BH #ATOMSYON01US

Q: 6. Does the SyncBac ensure frame accurate (jam) sync between multiple GoPros, i.e: if this was used for 360-video rigs would all camera shutters fire at the same time?

A: From the manufacturer. The SyncBac PRO enables frame accurate timecode to be embedded directly in the camera mp4 media. The SyncBac PRO does not 'genlock' the cameras in an array however, so the shutters will not be exactly firing at the same time.We have worked with Kolor's AVP software and the have added a really neat 'auto sync to timecode' mode for the camera media clips before the stitch. This feature is on v3.0 onwards. It works really well with fast results & no need to visually ID each take or clap and audio cue for each take.The other real workflow benefit is that using the pulse unit as the master 'mini base station' you can control and configure all the cameras in the rig from our free BLINK hub app - turn ON/OFF, START/STOP, set all resolutions and modes, monitor battery status and SD card status.

Q: 7. What cables/connectors/adapters are needed to use this with the Hero4?

A: No cables are needed because the Timecode Systems SyncBac PRO Timecode Sync System for GoPro HERO4 attaches to the back of the GoPro HERO4.

Q: 8. will this work with a Gopro Hero 9?

A: Hello Evan, this will become the "master" or "slave" TC as long as the GPH9 has bluetooth. If not, then you may have to get the Ultrasync ONE.

Q: 9. What long range wireless RF is recommended?

A: Timecode Systems :pulse Multi-Functional Timecode & Metadata Hub & Device Control CenterB&H # TITCBPULSEFCTimecode Systems Mini TRX+Timecode, Genlock, and Word Clock Generator with RF TransceiverB&H # TITCB05P

Q: 10. Will this work with a BMPCC?

A: Hello Diego, not sure if BMPCC has BT, but if you use it with the NINJA V and SYNC module, yes, if you get the ultasync one, yes but the BLUE model may not work.