Create light around your subject or augment existing light with the VS-570F Wireless TTL Flash from Bolt. Available here to be fully compatible with Fujifilm's TTL, including use as a wireless slave flash, the VS-570F allows photographers to work quickly and comfortably by knowing that settings can be easily determined with the camera's automatic metering system. This unit also has good power output with a guide number of 141' at ISO 100 and 50mm and can cover a range of focal lengths from 24-105mm using the zoom head, or as wide as 18mm with the pull-out diffusion panel. You can even control output manually with power settings from 1/1 to 1/64.

In addition to on-camera TTL, the VS-570F can be set up as a simple optical slave. Multiple sync modes are available for complete control over your images, including high-speed sync and both 1st and 2nd curtain sync settings. The flash also has a recycle time of 0.5-9 seconds and can run on either 4 AA batteries or an external power pack, thanks to the inclusion of an HV power port. Additionally, for basic off-camera use it has a standard PC sync terminal.

Compatible with Fujifilm TTL    Guide Number: 141' at ISO 100 and 50mm    Zoom Range: 24-105mm (18mm with Panel)    Tilts Upward 90°    Rotates Right 120° & Left 180°    Wireless Slave TTL Functionality    High-Speed, 1st & 2nd Curtain Sync    PC Sync Terminal & HV Power Socket    Runs on 4 AA Batteries

Compatible with Fujifilm TTL

Guide number of 141' at ISO 100 and 50mm position

Zoom head offers coverage of 24-105mm on full-frame sensors with the ability to cover 18mm when the pull-out diffusion panel is used

Manual power control from 1/1 to 1/64

Tilts upward 90° and rotates right 120° and left 180°

Built-in reflector panel can bounce some light forward when the flash is tilted to fill in shadows and create catchlights

1.8" backlit LCD screen

AF assist light for working in dim lighting conditions

The flash can be set up as a wireless slave TTL flash unit

In addition to use as an optical slave the VS-570F can be set up as a slave TTL unit for Canon and Nikon systems

Wireless transmission for manual master and slave modes uses an optical pulse method with 33' range

Access to 4 wireless channels and

Optical slave timing modes include instant sync, skip one pre-flash, and skip two pre-flashes

Flash duration of 1/1000 to 1/20,000 second

High-speed, 1st & 2nd curtain synchronization options

PC sync terminal for wired connection to your camera

Recycle time of 0.5-9 seconds with NiMH AA batteries

Runs on four AA lithium, NiMH, or alkaline batteries or an external power pack via the HV power port

Port for updating firmware

Related Questions and Answers

Q: 1. Is this comparable with the Sony A7rii ? Will this work with the radio transmitter that comes with the bare bulb bolt ?

A: This flash has the Multi-Interface Shoe, which makes it compatible with the Sony A7R II. It will not be compatible with the dedicated radio trigger for the Bolt bare bulb flashes like the VB22.

Q: 2. Hi! Can this flash use with the Olympus PEN E-PL1 Mirrorless Micro Four Thirds Digital Camera and the Olympus OM-D E-M10 Mark II Mirrorless Micro Four Thirds Digital Camera on the hot shoe?

A: Yes, this flash can be used with both the E-PL1 and the OM-D E-M10 Mark II.

Q: 3. Will this flash work with the Panasonic FZ1000?

A: Yes this flash can work with the Panasonic DMC-FZ1000.

Q: 4. Is the shoe mount made out of metal or plastic ?

A: The shoe mount is mostly plastic with some metal parts.

Q: 5. For Canon Powershot cameras, how do you decide 1st curtain sync or 2nd curtain sync, and S1 or S2?

A: The right flash mode would depend on what modes are offered in the camera and the application. If using 1st curtain sync, the flash will fire when the exposure begins while with 2nd curtain sync, the flash will fire just before the exposure ends.

Q: 6. Can this be remotely triggered by a Sony a6000? Can the built-in camera flash trigger it, or do I need any additional equipment?

A: Yes, you can trigger from your sony a6000 using your built-in pop up flash ,no need or any additional equipment.

Q: 7. Is it TTL mounted on a Sony A6000?

A: Yes, the Bolt VS-50SMI can shoot in TTL on a Sony a6000.

Q: 8. Can I use some cable to shoot with the Bolt VS-570F flash in TTL mode AND off camera? If yes, do you think the HSS will work too? I appreciate your help! (I own an X-T10 and need to shoot off camera in TTL mode; thank you!)

A: You wouldn't need an off-camera TTL cable to use this flash TTL off camera - this is a wireless TTL flash featuring slave functionality.

Q: 9. Will it be good for a Nikon D-700 FX ??

A: The Bolt VS-570N Wireless TTL Flash for Nikon Cameras is i-TTL compatible and would be fully compatible for use with the Nikon D700 DSLR camera.

Q: 10. Can this flash be used as a master with the Nikon D500?

A: The pin contact of the flash must have the same pin of the hot shoes of Nikon camera as its design. It should be working.