With 1,000VA / 900W simultaneous sine wave output, the Smart App Online Series 2 RU Rack/Tower UPS from CyberPower is designed to provide sine wave output to a variety of electrical devices requiring seamless power protection. With double-conversion UPS topology, connected devices such as servers, lab equipment, and other high-end components aren't affected by a transfer time when switching between regular power and backup power. The system is even expandable, making it easy to increase the amount of battery backup that is available, thus increasing the time devices can be powered using this UPS.

With fast charge technology built right in to this UPS, the batteries can be recharged and swapped out when needed thanks to hot-swap support. Setup and configuration is simple, as this UPS features USB and serial connectivity and is compatible with Windows, Linux, and VMware systems. Once configured, EMI/RFI filters ensure that connected equipment receives clean power while the resettable circuit breaker protects devices should the current become too high. Users can even see the status of the UPS, thanks to LED status lights depicting power on, line mode, battery mode, bypass mode, fault, and full replace statuses.

1,000 VA / 900 W Output    120V Input    8 x Battery Powered Outlets    4-Hour Recharge Time    Audio Alarms    USB/Serial/SNMO/Relay/EPO Support    Telephone / Network Data Line Protection    ENERGY STAR Qualified

• Prevents power surges that travel through telephone and Ethernet lines from causing damage to electronics.

• Provides consistent and clean power, regardless of the condition of incoming power.
• With this technology, the system operates on isolated DC power 100% of the time, which means it has a zero transfer time because it never needs to switch to battery.
• This double-conversion UPS system is designed for high-end system components, corporate servers, lab equipment, and other sensitive electronic devices.

• Provides power protection to ENERGY STAR 6.0 systems with Active PFC power supplies.

• Displays UPS statuses and customizable operating settings from up to 10’ away with an optional cable.
• This LCD control panel can be configured in English, Spanish, or French for ease of use.

• Extend runtime by adding BP36V60ART2U EBMs (available separately).
• Up to ten modules can be added to this UPS unit.

• Allows UPS batteries to return to 100% capacity more rapidly by utilizing a built-in charger inside each EBM.
• Restores a complete charge within 5 hours regardless of the number of EBMs.

• Improves and extends the functional life of a UPS battery and reduces excessive heat during work cycles by using a three-cycle charging process.

• Improves UPS efficiency up to 93%; saves on electrical and cooling costs.

• Eliminate downtime related to UPS power maintenance for continuous power availability.

• UPS has two banks of outlets which can be configured so that the non-critical loads shut off after a set timeframe to provide additional runtime for the critical load outlet.
• Users can prioritize their equipment runtimes to maximize the output of the UPS to meet their power requirements.

• Allows the UPS to be shut off in the event of an emergency, when the EPO port is connected to an EPO switch.

• Provides stable sine wave output (free of harmonics and distortion) without switching to battery mode when running on generator input power.

• Provides the flexibility to set the output frequency, regardless of the input frequency, to match connected equipment by selecting 50 or 60 Hz output on the LCD control panel.

• Enables full integration with built-in power management and auto shutdown features on Windows, Linux, and VMware systems through a HID-compliant USB port and Serial port.

• Prevent electromagnetic and radio frequency interference to ensure clean power for connected equipment.

• Identify when the model is running on battery power, overloaded, or has a low battery.

• Interrupts an electric current in a circuit when the current becomes too high.

• Indicate power on, line mode, battery mode, bypass mode, fault, replace battery.

• Allows for horizontal rack or vertical tower installation.

• Provides IT professionals with tools for monitoring and managing the UPS and backup power.
• This software offers remote management functionality.

• This CyberPower UPS system is a Cisco EnergyWise compliant end device.

• ENERGY STAR certified Uninterruptible Power Supply (UPS) system.

• CyberPower will repair or replace properly connected equipment if it is damaged by a power surge.

Related Questions and Answers

Q: 1. Does this allow remote monitoring/email alerts?

A: Hello David, Yes this unit will support remote monitoring/email alerts with the addition of the optional RMCARD205.

Q: 2. Can I connect a three outlet 50 foot extension cord into a single surge+battery outlet on the UPS as I have 2-3 other devices too far away from where the UPS will be placed. The devices are a cable modem, WiFi router and Netgear router?

A: In order for the UPS to work as intended, it is not recommended to use any type of extension cord or to share outlets with more than 1 device.

Q: 3. Can I plug in a power conditioner to this (Furman SS-6B Power Strip) or would that be redundant, or cause a problem? I’m in residential with power issues that are causing odd hums in audio recordings, and the electrician says a UPC is the way to go, but the studio engineer says a power conditioner is necessary.

A: I'm an electrician and concur with the other answers, you need to look into grounding issues, specifically what's called a "ground loop". As for the UPS, it won't fix this issue, it fixes voltage and power factor issues as well as backup power of course, but it won't hurt anything either. They do make "ground loop isolators" that may do the trick, but sometimes won't help either.

Q: 4. How many RU does this take up? Will it fit in a 2U space, or does it need more room?

A: CyberPower CPS1500AVR Smart App Equipped Uninterrupted Power Supply is 2 RU.

Q: 5. Does this software work with Mac computers?

A: Hi David,Reiko and Robert are both right and our software is compatible with Mac computers.

Q: 6. So if I have a 3D printer that pulls about 50 watts, how long will this thing keep it running if power goes out?

A: According to the manufacturers runtime calculator a 50w load would be about 100 minutes.

Q: 7. does this support remote monitoring/email alerts?

A: Hello David, Yes this unit will support remote monitoring/email alerts with the addition of the optional RMCARD205.

Q: 8. Can B&H supply a 220v version of this or something comparable? If so, kindly send a link. Thanks.

A: Unfortunately, we do not have a 220v UPS.

Q: 9. Can it safely and effectively power a Bmpcc 4K?

A: Yes. But we highly suggest using v / gold mount to power up the following unit for more mobility.

Q: 10. Are the batteries hot swapable?

A: The batteries are not hot-swappable.