The EC-10M El Cajon Mic Processor from Roland is a creative tool designed for the acoustic cajon. It can be used to pick up the cajon's acoustic sound with the included clip-on condenser mic, which is also used to trigger a variety of onboard tones for layering with the cajons acoustic sound.

Featuring sixteen sound-kit variations, various control knobs for the compressor such as threshold and volume, and multiple inputs such as 1/4" TRS and 1/8" mini-jack, the EC-10M mic processor can also create percussion phrases with the built-in looper. This lets you play additional sounds via integrated A/B foot pads or optional kick-trigger pedals.

Furthermore, you can send the sounds from the unit to an amp or a PA system, which gives you complete control over your stage sound. The EC-10M transforms the acoustic cajon experience with a world of new expressive power. It can operate on four AAA-size batteries (for up to five hours) or with the included power supply.

Easy Setup with Clip-On Condenser Mic    16 Onboard Kits    Multiple Tones    Create Loops and Play Along    Versatile Outputs    Works with Power Supply or Batteries

With the EC-10M, take your acoustic cajon performances to new heights. Just attach the dedicated clip-on mic to the instrument's sound hole, and then layer EC-10M tones with the acoustic voice to create unique hybrid sounds. The 16 kit variations include percussion sounds such as tambourine, surdo, splash cymbal, and many others, plus acoustic snare drum and the famous TR-808 snare. Built-in cajon tones with ambience are also included for reinforcing your acoustic cajon's natural voice with powerful studio sound

The EC-10M senses when the mic is picking up sounds from the head and edge surfaces on the cajon, giving you the ability to trigger electronic sounds with each of these areas. This lets you integrate EC-10M sounds using authentic cajon techniques, so you don't have to adjust your playing in any way

In addition to head and edge sounds, each of the 16 kits within the EC-10M includes two electronic sounds that are pre-assigned to the onboard A/B foot pads for triggering with toe taps while performing. If you'd prefer to play these sounds with authentic foot techniques and a more solid feel, up to two Roland kick trigger pedals (KT-10, KT-9, or KD-7) can be connected

You can use the compact EC-10M anywhere, since it weighs just 1.1 pounds and runs on four AAA batteries. The included clip-on condenser mic is compact and convenient, eliminating the need to take up valuable stage space with a mic stand and large microphone. With its small footprint, the EC-10M is an easy fit in the tightest performing spaces

Along with being a sound module for electronic sounds, the EC-10M functions as a mic preamp for the clip-on mic, enabling you to amplify both the acoustic cajon and layered sounds through an amp or PA

A built-in looper for the electronic layered sounds lets you create instant percussive backing for acoustic cajon playing or jamming with another instrument. The looper is controlled using the A/B foot pads, and you can capture electronic sounds triggered from the cajon and external pedals in your loops. And by changing the kits while the loop is playing, the tones in the loop are changed, too

Related Questions and Answers

Q: 1. I use MagMod. Will the rubber band that has the magnets in it fit over this head?

A: The Magmod system has not yet been tested with the EL-1 so the results may vary.

Q: 2. I have a Canon 90D. Is this unit compatible with it?

A: Yes, it is compatible with the 90D.

Q: 3. If I use the EL-1 at less than full power, will it recycle faster than 0.9 sec? If so, how fast will it recycle? I'd like to use the EL-1 as a fill-in flash in bright daylight. I assume I won't necessarily need full power for that. Would love it to recycle fast enough to take 2 or 3 shots per second. Will that be feasible?

A: According to Canon, the EL1 can recycle from 0.1-0.9 seconds, with the lower time frame being for the lowest power setting of 1/64. Unfortunately, they don't publish what the exact recycling time would be for any of the other power settings on this flash.

Q: 4. can I use the Canon CP-E4N Compact Battery Pack with the EL-1?

A: Yes, the plug from the CP-E4N will connect to the "external power source socket" on the EL-1. However, please note that few are likely to need that feature except those wanting it mostly to extend battery life. That's because the rechargeable battery used for the EL-1 can already allow it to recycle after a full power flash in just 0.9 seconds.

Q: 5. I can't figure out how to get the IR beam activate with any flash I currently own with the Canon R5. Is it neccisary to use this flash in order to get the beam in a dark room?

A: Unfortunately, infrared auto-focus assist beams will not trigger or work in tandem with mirrorless cameras. This is unfortunately a limitation of mirrorless technology.

Q: 6. is this compatible with the Yongnuo YN-E3-RT II Wireless Speedlite Transmitter?

A: Canon does not comment on compatibility with third party triggers. And as firmware come up it could stop the third-party trigger from working. Best is to use one of these triggers, https://bhpho.to/3zxKbpI

Q: 7. I use a godox S-style mount for my speedlights with elinchrom modifiers - will this fit or is it too big?

A: The Canon EL-1 can work with a Godox S-Type Bracket.

Q: 8. I know it will work using a 430exii as the trigger. How would the recycle time be if the 430 does not fire but simply triggers the EL-1? (I'd hope it would still be just as fast as if it were on-camera!)

A: The 430exii offers very slow recycle time as it is a consumer based unit with no option for a high volt power pack. We suggest looking into the following unit as it will keep up in a more demanding environment. Godox TT685C II Flash for Canon Cameras BH #GOTT685IIC • MFR #TT685IIC https://bhpho.to/3QdhY0w

Q: 9. What is the recycling time when using the CP-E4N Compact Battery Pack with the Speedlite EL-1 at full power?

A: Canon Speedlite EL-1 recycling time is aproximately 0.9 seconds.

Q: 10. what is the power in watts of this flash? Thanks.

A: Speedlights such as this will be under 100w/s at max power.