The VP64A from Shure is a high-output omnidirectional handheld dynamic microphone designed for professional audio and video production. It combines exceptional performance and comfortable feel with a handsome on-camera appearance.

The 7 7/8" VP64A is ideal for close-up use and can be used outside as well as indoors. The omnidirectional pickup pattern provides uniform pickup on or off axis, eliminating the need for critical microphone positioning. The VP64A mic also features a tailored frequency response with an upper midrange presence rise that adds crispness and clarity to speech. The cartridge utilizes a neodymium magnet for higher output and increased signal-to-noise ratio.

The cartridge is housed in a rubber isolation mount for ruggedness and to minimize handling noise. It is protected by a water-resistant mesh that enables the microphone to be used during the most challenging weather conditions. For added wind and "pop" protection, use the supplied windscreen.

Dynamic ENG Handheld Microphone    Zippered Pouch for Handheld Microphones    Includes Microphone Clip    Foam Windscreen

Neodymium magnet for increased output and maximized signal-to-noise ratio

Frequency response tailored for optimum speech clarity and crispness

Omnidirectional polar pattern eliminates need for critical microphone positioning

Rubber isolation mount for low handling noise

Water-resistant mesh repels water under challenging weather conditions

Supplied windscreen provides extra protection to further reduce "pop" noise and wind pickup

Comfortable feel

Handsome appearance; ideal for on-camera applications

Related Questions and Answers

Q: 1. I've read that 'dynamic' mics work best when the sound source (voice or instrument) is close to the mic -- say six-eigth inches for example; but their sound pickup range falls off quickly as you move much further away from the mic (which has the advantage of reducing background noise). Is this true for this mic?

A: That is true for dynamic mics in general. Some dynamic mics are more sensitive than others. This one in particular requires the source of sound to be just a few inches away. Probably closer to around 3-4 inches or so. The polar pattern also will determine how far off axis the source of the sound can be until the sound drops out. This Samson Q2U is a cardioid pickup pattern which is about 120 degrees around.

Q: 2. Is there a mic adapter that would allow me to change the angle of this mic (using the provided Manfrotto tripod) so that I can better point it to my mouth?

A: You will not need an adapter for this, the ball joint at the top of the Manfrotto tripod is able to pivot so that you can adjust the tilt of the microphone.

Q: 3. Can this mic connect directly to an iPhone? I need a bluetooth mic for interview video's I want to do on my iPhone.

A: This mic is not advertised as working with iOS devices, but if you get an Apple Lightning to USB Camera Adapter, B&H # APMLUCADP, you can connect the USB receiver to an iPhone. This is A UHF system, Bluetooth is generally not used for wireless mics's of this type, so you do have to plug a receiver into your iPhone.

Q: 4. Is Phantom power required?

A: The Shure MV88+ Video Kit (BH # SHMV88DIGVK) is USB powered.

Q: 5. is there a way to attach the phone clamp to a mic boom?

A: Yes. Mic stands use 5/8" threading, and the phone clamp has 1/4 20" female (where the tripod attaches), so you can use a simple adapter like this: https://www.bhphotovideo.com/c/product/1176868-REG/triad_orbit_1_4ada_1_4_to_5_8_adaptor.html

Q: 6. Do this have the standard size aux jack or the big one?

A: It has the standard size aux jack

Q: 7. What is max phone width? I need ~88mm with my case on an iphone 12 pro max.

A: The Shure phone clamp included with the MV88+ kit opens to approximately 95mm (measuring the inside width from edge to edge) so you should not have a problem with your iPhone 12 Pro Max in a standard phone case. If you have a different phone clamp that you prefer using to mount your phone, you can use it together with the Manfrotto stand and MV88+ microphone, just as long as the phone clamp has 1/4"-20 threads on the top and bottom.

Q: 8. Does the MV88+ work with IOS 15.1 and 15.2?

A: Yes, the Shure MOTIV MV88+ Digital Stereo Microphone is compatible with iOS 15.2 and 15.2.

Q: 9. What's the difference between the Old & New packaging? Is it just the packaging or is it he equipment as well?

A: Only the packaging is different. The microphone and included accessories are all the same.

Q: 10. It could be used to connect my QSC k12.2 speakers to the QSC Touchmix 8 mixer for wireless use.?

A: Yes the Sennheiser XSW-D is directly compatible with the QSC Toycmix 8 and the QSC K12.2.