The Arrow X5 Fluid Head from Miller is suitable for use with ENG and EFP camcorders. It offers a 4.4 to 46.2 lb payload range and seven selectable pan-tilt fluid drag positions. It features precision fluid drag with a 16-position CB Plus counterbalance system. CB Plus is a sequential counterbalance design, features eight larger counterbalance steps, allowing you to quickly and efficiently achieve the required counterbalance position. The system's one flick switch located at the front of the head adds a half step between each of the eight larger steps enabling counterbalance fine-tuning when required. The Arrow X5 fluid head features a 100mm ball leveling with three M5 holes for flat base mounting. The pan and tilt locks utilize caliper disc brakes for reliable, short-throw fixing.

Compact, lightweight, and versatile

7-step plus zero pan and tilt drag

16-position CB Plus counterbalance system

Wide payload range of 4.4 to 46.2 lb

Fluid drag system with smooth start and soft stop technology and balanced diagonal transitions

Controls all-in-one-location design for fast, easy and practical use

Illuminated bubble level and pan-tilt drag controls

Precise floating pan-tilt caliper locks ensure bounce free on-off performance

Quick-release, 120mm sliding camera platform with Euro-style camera plate

Removable 100mm ball leveling with three 3/8" holes for flat base mounting

Mitchell base adaptable

Robust construction for rugged outdoor shooting conditions

Optional second pan handle mount

Side mounting points for viewfinders and accessories

Related Questions and Answers

Q: 1. Are there any compatible pan handles with clamps included? I'm looking to add an extra pan handle.

A: The correct handle for the Miller CX8 would be Miller Telescopic Pan Handle for ArrowX Heads BH #MI696 • MFR #696 https://bhpho.to/3DcqxEf ( A clamp is included)

Q: 2. does the side mount system in these heads work directly with arri style long dove plates? or will I have to screw it onto the head's proprietary plate?

A: Miller has their own proprietary quick release plate system. You will need to add a dovetail if you intend to use this tripod with Arri standard dovetail mounts.

Q: 3. Is the 75mm bowl proprietary to Miller tripods? Will this head fit any brand of tripod with a 75mm bowl? For example, experience taught me Sachtler bowls are proprietary to the tripods.

A: Yes.

Q: 4. Does it accept a Manfrotto 501 sliding plate?

A: We're afraid not. This head uses the Miller 1204 style plate. https://bhpho.to/2Use2dY

Q: 5. Will the Miler CX6 fit on Sachtler Flowtech MS 75?

A: Yes, Miller CX series 75mm tripod heads, such as the Miller CX6 Fluid Head are compatible with Sachtler Flowtech MS 75 legs.

Q: 6. Will this 100mm head fit on a Vinten tripod with 100mm bowl?

A: The Miller CX10 Fluid Head (B&H# MI1096) will fit in tripods, hi-hats, and bowl adapters conforming to the 100mm bowl standard. Please note that the particulars of inter-brand fit can vary, however, so we cannot promise that every user will be satisfied with every combination. However, we do offer 30 days to return this item (with all packaging items and packing materials, and in the same shape it was received) if it does not meet your needs.

Q: 7. Does a standard manfrotto plate fit in this head?

A: We're afraid not. This tripod has its own quick release plate system, it is not compatible with Manfrotto plates.

Q: 8. Is the 3rd step of drag on the CX6 similar to the 5th step on the CX8 or is it less? Is the difference just fewer steps in-between or is it less drag overall?

A: Comparisons between the drag settings is not something listed by Miller on any head. The key in this case is that the CX8 offers more adjust-ability with 5 steps over 3 steps on the CX6. However we are not aware of a direct comparison between the steps.

Q: 9. Does the head come with the quick release plate?

A: The quick release plate would be included.

Q: 10. Does the plate on this tripod allow for side loading or does it require you to slide it in from the front or the back each time?

A: No, the Miller AIR Fluid Head does not have side loading.