If you're tired of dealing with automatic gain control or poor audio from your DSLR camera, this set of two Mini XLR to XLR Audio Cables allows you to plug in two XLR microphones or line inputs to your Blackmagic Video Assist 4K Monitor/Recorder for quality audio recording.

The Video Assist 4K has two balanced female mini XLR ports that support 48V phantom power so you can plug in any standard 3-pin XLR microphone. Each cable has a male mini 3-pin XLR connector and a female standard 3-pin XLR connector, and they are each 19.5" long.

Set of Two Mini XLR to XLR Cables    Input Audio to Video Assist 4K    Plug into Two Balanced Audio Ports    Both Cables are 19.5" Long

Related Questions and Answers

Q: 1. If I use two separate audio inputs can I separate them to right and left channels?

A: Yes, you can separate them.

Q: 2. I can make convert the video by using Blackmagic Design SDI to Audio Mini Converter but there is no sound( I mean I cant hear the voice on my tv what shall I do ?

A: Make sure you've got your dip settings correct for the type of audio, aes/ebu or analog and you're decoding the correct channels your audio is on. You should play around with your dip switch settings and try different configurations.

Q: 3. Is the analog audio output balanced or unbalanced?

A: The Blackmagic Design SDI to Audio Mini Converter has 4 channels of professional balanced analog audio with standard 1/4 inch jack connections.

Q: 4. how long is the cable?

A: without plugs the length is 43 cm (only cable)with plugs on both side: length is total 54 cmconversion onto feet/inches should be43 cm = 1 ft and 4.9291 inches54 cm = 1 ft and 9.2598 inches

Q: 5. is it also for the BMPCC 6K pro?

A: Yes it is.

Q: 6. Probably a dumb question. But will this work with the Canon c70?

A: The C70 offers Mini XLR connections. This should work well with that camera.

Q: 7. Could I use this to attach a RODE NTG4+ mic to the BMPCC4K for phantom power?

A: The RODE NTG4+ Microphone is battery powered, or Phantom powered. Yes. the Blackmagic Design Set of 2 Mini XLR to XLR Audio Cables would work with the Pocket Camera models, and allow you to work with the The RODE NTG4+. The camera will also be able to supply phantom power to the microphone as well.

Q: 8. This comes with two cables, but the BMPCC 4K only has one mini-XLR input. Is the second cable just a backup?

A: There are other BM devices that have a left and right audio input - notably the 4K Video Assist, the pair would be a replacement for those cables.

Q: 9. Is this the right cable if you just want to connect a shotgun to the camera itself, or is it specifically for their video assists?

A: If you are asking about the Pocket Cinema 4K camera then yes, these cables will work for audio.

Q: 10. DO they make longer cables to use with video assist and a shotgun boom pole mic (Sennheiser k6) ?

A: Probably not. Just plug it in to another XLR cable and then run that into the mic.