Best Camera Bags

Triad-orbit Gb-3 Grav Bags Ballast Bags

Product Code: ga18101
Availability: In Stock

$338.97 $464.39

Qty

7 reviews Write a review

Description
Reviews (7)

The Triad-Orbit GB-3 Grav Bags Ballast Bags are a set of three 3.3 lb ballast bags that can be used either individually or together. This is due to hook-and-loop fasteners on the ends of each bag, allowing you to connect them for a center weight or one at a time on each leg end that needs stability.

Three 3.3 lb Bags Can Be Used Individually or Together Hook-and-Loop Fasteners

Parameters
Design	Ballast Bag
Weight Capacity	3.3 lb / 1.50 kg
Number of Bags	3
Fill Material	Shot
Type of Closure	Hook & Loop
Environmental Resistance	No
Material	Nylon
Packaging Info
Package Weight	10.4 lb
Box Dimensions (LxWxH)	10.6 x 6.3 x 3.5"

Related Questions and Answers

Q: 1. Can they fit a full frame dSLR camera and lens?

A: Yes, the bag will fit a DSLR and short lens.

Q: 2. Is the bottom clamp width adjustable, and does it hold the MixPre 6 recorder tightly? I need to remove the MixPre 6 to access the SD card, so I'm curious what impact this product will have in use.

A: The bottom clamps on the ORCA Aluminum Lift System for ORCA Audio Bags have a spring opening to fit and adjust to the width of the mixer/recorder being used.

Q: 3. What is the length of the T3 Tall Tripod when collapsed for travel and transport?

A: Thank you for your inquiry. The T3 stand can collapse down to 31 inches for transport. I hope that this answers your question, but if it doesn't, please let me know and we will find the right solution.Sincerely,Richard CarriganTriad-Orbit Support Teama href= http://www.Triad-Orbit.com target= _blank www.Triad-Orbit.com/a

Q: 4. Is the IO-H2 5/8" Mounting version compatible with the IO-R Quick-Change IO-R Quick-Change Coupler Retrofit Kit? Want to set up a SM7B, Beta 58a, and Rode Procaster to easily swap on and off a Tama 5/8 thread MS756RELBK boom stand.

A: Yes. The IO-H2 5/8" Mounting Head from Triad-Orbit allows you to integrate 5/8" threaded gear to one of their IO-equipped stands or mounts, and is designed for added weight handling capacity.

Q: 5. What is the load capacity of the Orbit boom?

A: Dear Chris,Thank you for your inquiry. Our Orbit booms are rated to hold up to 4lbs (2kgs) on each arm, with the boom arm fully extended and parallel with the ground, before it may start to lower. However, depending on how far you extend the extension tube and the angle that you position the arms, you may see a lower or higher capacity. I hope that this answers your question, but if it doesn't, please let me know and we will find the right solution.Sincerely,Richard CarriganTriad-Orbit Support Teama href= http://www.Triad-Orbit.com target= _blank www.Triad-Orbit.com/a

Q: 6. Would this work with something that has a Baby (5/8") stud receiver such as the Manfrotto 099B?

A: This stud is only for the Triad Orbit system.

Q: 7. Will the original Eon One speaker fit in this Transporter bag?

A: The JBL EON ONE Compact All-in-One Rechargeable Personal PA is only compatible with the JBL Eon MKII.

Q: 8. Will this fit the JBL EON718S?

A: The JBL BAGS Caster Board is designed specifically for use with the JBL PRX918XLF Subwoofer and is shaped to fit the cabinet's contours. The plate measures 25.5 x 23". The base of the JBL EON718S Subwoofer measures 25.1 x 24", It's not a perfect fit, but it might work.

Q: 9. Does this ballast bag come empty? I'd like to be able to travel with it empty.

A: The bags are shipped full.

Q: 10. What are the dimensions of the brass hex itself?

A: The brass hex section of the Triad-Orbit IO-H4 1/4"-20 Mounting Head is 1.5 inches long.

Michael	21/09/2024
Better than expected. Velcro straps to attach around tripod legs. Quality product! 5

Dorian	05/09/2024
This is a superb solution for using a tripod-based Monopod for shooting 360 VR or immersive movies. Even though one shot, two mens 360 cameras (Ricoh, Nikon, etc) have low mass and small surface areas and so one would think they could be placed on a monopod with a small tripod stabilizer and left alone, think again. I lost my first Ricoh Theta S to a sudden gust of wind that came from nowhere (first onshore of the morning). Over the rig went costing me 260.00. This Triad weight set is perfect for such an application, and although feet on a Monopod are not meant to turn it into a stable tripod, for the purposes of shooting spherical VR photography, it is the ideal solution. 5

Richard	01/09/2024
I use this product to steady my tripod on exceptionally windy days. It prevents me from wasting a day's shoot when its windy. Although it adds substantial weight to my load out its has paid off several times. 5

Sal	15/06/2024
These ballast bags are great for holding down equipment. I'm using these to hold down the feet of a monopod that is somewhat top heavy because of my equipment. They're heavy enough to where the monopod doesn't tip over when bumped, but not so heavy that it's a pain to carry them. 5

Theo	18/05/2024
Very good quality. Great for smaller/home studios where huge boom stands are impractical. 5

Alan	24/04/2024
I keep these ballast bags close at hand. They are always on my tripod stands whether the mic is heavy or not. Just added insurance for those expensive microphones. 5