Aux Inputs On Vizio Sound Bar

Yamaha Emx7 12-input Powered Mixer

Product Code: ga181061
Availability: In Stock

$2,699.97 $3,995.96

Qty

0 reviews Write a review

Description
Reviews (0)

The Yamaha EMX7 is a 12-input powered mixer with an integrated 1420W amplifier, eight mic/line inputs, four stereo line inputs, and two Aux sends. The mixer features a Hi-Z guitar input on channel four and each channel offers a 3-band EQ for custom tailoring your sound. Channels 1-4 offer XLR-1/4" combo jacks. Channels 5 through 12 provide mono XLR inputs, with channels 5-8 offering 1/4" inputs and 9-12 offering an additional set of stereo RCA inputs. Channels 11/12 also include an 1/8" stereo mini-jack for connecting portable music players.

The EMX7 includes a single knob compressor on channels 1-4, an integrated feedback suppressor, and a built-in multi-effects processor with SPX series algorithms. Additionally, the mixer offers an integrated speaker processor with bass boost, designed to bring out the best quality from Yamaha or 3rd party passive speakers. The EMX7 also includes a Flex9GEQ graphic equalizer for Aux 1, Aux 2, and Stereo Output. The Flex9GEQ allows you to select up to nine bands out of a total of 31 and adjust the gain. Optional accessories available include a foot switch for effects bypass and a rack-mount kit. The EMX7 ships with a standard IEC power cord.

Integrated 1420 W Power Amplifier 8 Mono Mic/Line Inputs Four Stereo Inputs Hi-Z Input on Channel 4 Two Aux Sends w/ Dedicated Outputs 3-Band EQ on Each Channel Master EQ for Music Playback or Speech Integrated Feedback Suppressor Built-In SPX Multi-Effects Compatible with 4 and 8 Ohm Speakers

Analog Input Characteristics
Input Connectors	Channels 1-4: 4x Combo XLR-1/4" / 6.35 mm Channels 5/6: 1x XLR, 2x 1/4" / 6.35 mm Channels 7/8: 1x XLR, 2x 1/4" / 6.35 mm Channels 9/10: 1x XLR, 2x RCA Channels 11/12: 1x XLR, 2x RCA, 1x 1/8" / 3.5 mm stereo mini-jack
Load Impedance	Channels 1-4 (XLR Mic/Line): 3 kOhms actual, 50-600 Ohms nominal with mics Channels 1-4 (1/4" Mic/Line): 8 kOhms, 600 Ohms nominal with lines Channel 4 (1/4", Hi-Z Engaged): 1 MOhms actual, 10 kOhms lines nominal Channels 5-12 (XLR): 2 kOhms actual, 50 - 600 Ohms mics nominal Channels 5-12 (1/4", RCA, 1/8"): 10 kOhms actual, 600 Ohms lines nominal
Input Level	Sensitivity Channel 1-4 (XLR, Mic): -60 dBu (0.775 mV) Channel 1-4 (XLR, Line): -30 dBu (24.5 mV) Channel 1-4 (1/4", Mic): -50 dBu (2.45 mV) Channel 1-4 (1/4", Line): -20 dBu (77.5 mV) Channel 4 (Hi-Z Engaged, Mic): -50 dBu (2.45 mV) Channel 4 (Hi-Z Engaged, Line): -20 dBu (77.5 mV) Channels 5-12 (XLR): -60 dBu (0.775 mV) Channels 5-8 (1/4"): -20 dBu (77.5 mV) Channels 9-12 (RCA, 1/8"): -8 dBu (316 mV) Nominal Channel 1-4 (XLR, Mic): -43 dBu (5.48 mV) Channel 1-4 (XLR, Line): -13 dBu (173 mV) Channel 1-4 (1/4", Mic): -33 dBu (17.3 mV) Channel 1-4 (1/4", Line): -3 dBu (548 mV) Channel 4 (Hi-Z Engaged, Mic): -33 dBu (17.3 mV) Channel 4 (Hi-Z Engaged, Line): -3 dBu (548 mV) Channels 5-12 (XLR): -43 dBu (5.48 mV) Channels 5-12 (1/4", RCA, 1/8"): -3 dBu (548 mV) Maximum Before Clip Channel 1-4 (XLR, Mic): -15 dBu (138 mV) Channel 1-4 (XLR, Line): +15 dBu (4.36 V) Channel 1-4 (1/4", Mic): -5 dBu (436 mV) Channel 1-4 (1/4", Line): +25 dBu (13.8 V) Channel 4 (Hi-Z Engaged, Mic): -5 dBu (436 mV) Channel 4 (Hi-Z Engaged, Line): +20 dBu (7.75 V) Channels 5-12 (XLR): -15 dBu (138 mV) Channels 5-12 (1/4", RCA, 1/8"): +25 dBu (13.8 V)
Analog Output Characteristic
Output Connectors	Stereo Out (L/R): 2x 1/4" / 6.35 mm balanced Aux Sends (1/2): 2x 1/4" / 6.35 mm balanced Rec Out (L/R): 2x RCA unbalanced
Impedance	Stereo Out (L/R): 600 Ohms actual, 10 kOhms Lines Aux Sends (1/2): 600 Ohms actual, 10 kOhms Lines Rec Out (L/R): 600 Ohms actual, 10 kOhms Lines
Output Level	Stereo Out (L/R): +4 dBu (1.228 V) nominal, +20 dBu (7.75 V) max before clipping Aux Sends (1/2): +4 dBu (1.228 V) nominal, +20 dBu (7.75 V) max before clipping Rec Out (L/R): -10 dBV (0.308 V) nominal, +18 dBV (7.75 V) max before clipping
Loudspeaker Outputs
Connectors	Speakers A/B: 2x Neutrik speakON NL4, 1/4" / 6.35 mm
Impedance	Actual Source Impedance: < 0.1 Ohms For Use with Nominal: 4 Ohm speakers, 8 Ohm speakers
Output Level	4 Ohm Speakers: 600 W (1 Hz THD+N < 1%), 710 W (1 kHz THD+N < 10% [CEA2006]) 8 Ohm Speakers: 400 W (1 Hz THD+N < 1%), 500 W (1 kHz THD+N < 10% [CEA2006])
General Specifications
Output Power	1 kHz THD+N < 10% (CEA2006): 710 W + 710 W (4 Ohms), 500 W + 500 W (8 Ohms) 1 kHz THD+N < 1%: 600 W + 600 W (4 Ohms), 400 W + 400 W (8 Ohms)
Frequency Response	Frequency Response Refer to the nominal output level @ 1 kHz Input to Speakers: +1/-3 dB (40 Hz to 20 kHz) Input to Stereo Out, Aux 1/2 Send: +0.5/-1.0 dB (20 Hz to 20 kHz)
THD + N	Input to Speakers (Mic/Line): 0.1% @ 10 W (40 Hz to 20 kHz) Input to Speakers (Line - Channels 1-4) 0.04% @ 65 W (1 kHz) Input to Stereo Out, Aux 1/2 Send (Mic/Line): 0.02% @ +14 dBu (20 Hz to 20 kHz) Input to Stereo Out, Aux 1/2 Send (Line - Channels 1-4): 0.007% @ +20 dBu (1 kHz)
Hum & Noise	EIN: -117 dBu Residual Output Noise Input to Speakers: -70 dBu (40 Hz to 20 kHz, Stereo Master Level: min) Input to Stereo Out, Aux 1/2 Sends: -82 dBu (20 Hz to 20 kHz, Stereo Master Level: min)
Crosstalk	(1 kHz): -85 dB
Input Channels	Mono (Mic/Line): 8 Stereo: (Line): 4 Total: 12
Output Channels	Speakers: A/B Aux 1 Send Aux 2 Send Stereo Out: L/R Rec Out: L/R
Bus	Stereo: 1 Aux: 2 (including FX)
Pad	Channels 1-4: 30 dB
Hi-Z Input	Channel 4: Supported
HPF	High Pass Filter (Channels 1-3): 80 Hz, -12 dB/octave
EQ Section	High: 10 kHz +15/-15 dB Mid: 2.5 kHz +15/-15 dB Low: 100 Hz +15/-15 dB
Compressor	Single knob compressor
Audio Level Meter	2x 12 Points LED Meter: (-30, -25, -20, -15, -10, -6, -3, 0, +3, +6, +10, Peak)
Built-in Effects	SPX Algorithm: 24 programs
Output Channel Function	Graphic EQ Speaker Processor Feedback Suppressor
Phantom Power	+48 V
Footswitch Input	Effect mute on/off
Protection	Load Protection: DC-fault Amplifier Protection: Overheat protection, overcurrent protection, integral power protection Power Supply Protection: Overheat protection, overcurrent protection
Power	Power Requirements: 100-240 VAC, 50/60 Hz Power Consumption: 45 W (Idle) / 250 W (1/8 power)
Operating Temperature	32 to 104°F / 0 to 40°C
Dimensions	18.3 x 12.1 x 12.8" / 464.8 x 307.3 x 325.1 mm
Weight	20.9 lb / 9.5 kg
Packaging Info
Package Weight	26 lb
Box Dimensions (LxWxH)	22 x 15 x 15"

1420-watt power amplifier for versatility in a wide variety of performance applications
Compatible with 4 Ohm and 8 Ohm speakers
12-channel mixer with four mono mic/line and four stereo line input channels, supporting a wide range of inputs
Channels 1-4 offer a single knob compressor
Channels 1-3 offer an 80 Hz high-pass filter to reduce microphone rumble
Channel 4 offers a Hi-Z input for guitar
Two Aux sends via balanced 1/4" outputs. Aux 2 also sends to internal effects engine
Yamaha’s high-quality SPX multi-effects, providing optimum processing for instruments or vocals
Feedback Suppressor, which automatically cuts and prevents undesirable feedback noise
Independent three-band equalizer on each channel for tonal adjustment and sound control
Integrated speaker processor
Flex9GEQ Graphic EQ: Allows you to select up to nine bands out of a total of 31 and adjust the gain
Stereo Output: Two balanced 1/4" outputs for connecting to powered speakers or an additional amplifier
Recording Output: Stereo RCA for connecting to a recorder

Related Questions and Answers

Q: 1. dose the livetrak have comp/limiter built in?

A: Yes. The L-20 has one knob compression on each track.

Q: 2. Can I bring the program feed from this mixer into Zoom or other similar software directly via the USB port on the mixer?

A: Yes, the Yamaha MG10XU can send a 2-channel mix out to a computer via USB.

Q: 3. In which country is the Yamaha MG10XU made, the one in your store is made in China? Made in Malaysia ?

A: The Yamaha MG10XU 10-Input Mixer with Built-In FX and 2-In/2-Out USB Interface is made in Malaysia.

Q: 4. Is there a maximum recording time per song?

A: With a 128 GB SDHC/SDXC Memory card, you can activate all 20 channels for recording and record for 10 hours and 56 minutes. Recording on just one channel yields 80 hours, 13 minutes. (2 channels = 60 hours 10 minutes) This is at a 44.1 kHz, 24 Bit rate and bit depth. At 96 khz, 24 bit, 1 track will run for 36 hours, 51 minutes and 20 tracks will record for 5 hours, 1 minute. If you want to use 48 kHz, 24 bits,, 1 track is 73 hours, 42 minutes and 20 tracks is 10Hr. 3 min. Recording at 16 bits? Multiply these times by 1.5. This is the total time for as many songs as you have. If they each run 4 minutes, you can record a lot of songs before you have to empty the memory card. I've found my machine to be a solid performer! Very clear recordings!

Q: 5. is the songs inbuilt ?

A: Songs are not built into this device. You would want to stream music from a mobile device and connect that to an hdmi tv input, or from a smart tv itself, and run the audio out of the tv to the karaoke receiver. Then you'd run the audio out of the receiver into the RCA or 1/8'' audio input of your speaker/ home receiver.

Q: 6. Can you bypass all of the onboard effects and record straight from the pres to the SD card?

A: Yes you can bypass effects also record to sd card all of your recordings save to SD card

Q: 7. Do all tracks bypass onboard effects when recording 20 separate tracks to a SD card for import into a DAW for post production? I want to mix live with effects to FOH and monitors, but record all tracks without any effects for later import and mixing.

A: All individual tracks will be recorded without any effects applied. If recording on the Master track, all effects will be heard on the recording to the Master track, but not on the individual tracks. The individual tracks can be set to record pre or post compressor in the Menu of the L-20.

Q: 8. Can you link two of the mono tracks in the setup to have additional stereo inputs from the 2 that are on the L20?

A: Yes, you can use any of the individual mono input channels to connect instruments, mics or other devices in order to create a stereo input. For example, if you are using a stereo microphone or connecting a keyboard that has two separate outputs for left and right, you can certainly connect each output to a different individual mono input on the L-20.

Q: 9. Does anyone know if it is possible to use a different usb bluetooth adapter?

A: No and I do recommend using their Bluetooth adapter for a clean signal

Q: 10. Hi what is the power adapter you supply for this one - is it universal? (We need 220-240)

A: The power supply included with this product is not universal. Compatible with 120 VAC only.

There are no reviews for this product.