Intellytech designed this Socanland 14.8V 160Wh Li-Ion Battery with a quick-reference LED battery-level meter and a V-mount. This battery supports a 30W camera for approximately 4.5 hours or a 45W camera for 3.5 - 4 hours. This battery also supports a 50W LED light for 3.5 - 4 hours as well as a 100W LED light for 1.5 - 2 hours. Four LEDs on the side of the unit meter the remaining run time.

14.8V 160Wh V-Mount    Supports 30W Camera for 4.5 Hours    Supports 50 & 100W LED Lights    4-LED Battery-Level Meter on the Side

Related Questions and Answers

Q: 1. Is the Intellytech Pocket-V 14.8V 155Wh compatible with the Blackmagic 4K and 6K?

A: *********** switch to Pro Video *****************

Q: 2. Is this essentially same as dynacore?

A: Yes it is

Q: 3. What is the max output capacity / load in watts and in amps?

A: Roughly 300-310 watts

Q: 4. Does this feature D-Tap charging?

A: Yes this Intellytech Socanland 280Wh can be charged via d tap chargers.

Q: 5. What is the charging time on a dead battery?

A: It all depends on the type of charger that you are using to charge the battery. For example if you were to use a 2.5A charger the battery would be fully charged in approximately 3 hours.

Q: 6. What is the average run time when running a bmpcc 4k with a monitor?

A: It can last about 2/4 hours. Best have extra batteries.

Q: 7. Will this work on the Black Magic Ursa Mini

A: A POWERANGE PR-BP-1900M 190Wh 14.8V Battery (V-Mount), like other V-mount batteries, would be compatible with a Blackmagic Ursa Mini camera, when used with a V-mount power plate for Ursa Mini.

Q: 8. Will this battery fit on the native mount of a Red V Raptor without adding a battery extension plate?

A: The bebob V150MICRO 14.4V, 147Wh V-Mount Li-Ion Battery can mount to the RED DIGITAL CINEMA V-RAPTOR 8K S35 Camera (Canon RF).

Q: 9. How long does this power the LC-160?

A: The Intellytech Pocket-V 14.8V 155Wh Lithium-Ion V-Mount Battery can power the Intellytech Litecloth LC-160 for about an 1 hour at full output.

Q: 10. Can i use any charger? I also have the Rotolight v-mount battery for Anova. I'm wondering if using the charger for that battery is okay on this Indipro 95wh v-mount batt.

A: Lithium-ion batteries need very careful charge monitoring to avoid the danger of overheating and fire/explosion. Ideally every lithium chemistry battery should only be charged using the chargers from the specific battery manufacturer as most have proprietary circuitry which may not be compatible with chargers from other makers.