You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Kramer Bcls-33 Cat 6a F/utp Low-smoke/zero-halogen Cable With Metal-foil Screen (1640')

Kramer Bcls-33 Cat 6a F/utp Low-smoke/zero-halogen Cable With Metal-foil Screen (1640')
  • Product Code: ga181218
  • Availability: In Stock

$1,766.40 $2,525.95

The BCLS-33 (1640') by Kramer is a high-performance Cat 6A F/UTP cable for IT, LAN, and Ethernet installations. Its design exceeds Cat 6A specifications and provides a larger bandwidth than the basic standard cable (sweep frequency up to 650 MHz).

The cable is constructed with four pairs of 23-gauge solid bare-copper conductors. The low-smoke zero-halogen jacket emits limited smoke and no halogen when exposed to high sources of heat, protecting people and equipment from toxic and corrosive gas.

Acting as a shield, an overall metal-foil screen with a drain wire helps further reduce the potential for electromagnetic interference (EMI). Other features include an internal rip cord to prevent damage to the individual conductors when stripping off the jacket, a cross filler to reduce crosstalk, sequential markings every meter, and a fumigated plywood reel.

Bandwidth Exceeds Cat 6A Specifications    4 Pairs 23 AWG Solid Bare Copper    Low-Smoke/Zero-Halogen Jacket    Metal-Foil Screen with Drain Wire    Internal Rip Cord    Cross Filler    Sequential Markings    Fumigated Plywood Reel

Parameters
ConstructionConductor: 4 pairs of 23 AWG solid bare copper
Insulation: Polyolefin (PO) – blue & white / blue stripe, orange & white / orange stripe, green & white / green stripe, brown & white / brown stripe
Twist: Left-hand
Assembly: Left-hand direction
Rip Shield: Mylar tape
Drain Wire: 24 AWG solid tinned copper
Shield: AI Mylar tape, 100% coverage and Mylar side facing out
Filler: Polyolefin (PO)
Jacket: Low-smoke zero halogen (LSZH), orange (Pantone 1485C)
DiametersJacket: 0.29 ±0.007" (7.6 ±0.2 mm)
Jacket Thickness: 0.021 ±0.001" (0.55 ±0.05 mm)
Insulation Blue & White / Blue Stripe: 0.045 ± 0.007" (1.15 ± 0.02 mm)
Insulation Orange & White / Orange Stripe: 0.043 ± 0.007" (1.11 ± 0.02 mm)
Insulation Green & White / Green Stripe: 0.045 ± 0.007" (1.15 ± 0.02 mm)
Insulation Brown & White / Brown Stripe: 0.043 ± 0.007" (1.11 ± 0.02 mm)
ElectricalTemperature and Voltage Rating: 60°C @ 300 V
Spark Test: 2.5 kVDC
AC Leakage Current: ≤ 10 mA /1.5 kVAC, through overall jacket
Coupling Attenuation: ≤ 55 dB @ 30 MHz, ≤ 41 dB @ 250 MHz
Conductor DC Resistance: ≤ 9.38 Ohms / 100 m
Resistance Unbalance: ≤ 5%
Dielectric Strength: 1.5 kVAC for 2 sec
Insulation Resistance: ≥ 5000 MOhms/m
Mutual Capacitance: ≤ 5.6 nF / 100 m
Capacitance Unbalance: ≤ 330 pF / 100 m, pair-to-ground
Characteristic Impedance: 100 ±15 Ohms @ 1-100 MHz
Regulatory PerformanceANSI/TIA-568-C.2 (2009): Balanced twisted-pair telecommunications cabling and components standards
ISO/IEC 11801 (Edition 2.2): Information technology, generic cabling for customer premises
IEC 61156-5 (Edition 2.0): Multicore and symmetrical pair/quad cables for digital communications, (part 5: symmetrical pair/quad cables with transmission characteristics up to 1000 MHz), horizontal floor wiring, sectional specification
EN 50288-6-1:2013: Multi-element metallic cables used in analog and digital communication and control, (part 6-1: sectional specification for unscreened cables characterized up to 250 MHz), horizontal and building backbone cables
Regulatory SafetyIEC 60332-1-2: Tests on electric and optical fiber cables under fire conditions, (part 1-2: test for vertical flame propagation for a single insulated wire or cable), procedure for 1 kW pre-mixed flame
IEC 61034-1 / 61034-2: Measurement of smoke density of cables burning under defined conditions
IEC 60754-2: Test on gases evolved during combustion of materials from cables
Usage & EnvironmentalCable Cold Bend: -4°F (-20°C) for 4 hours
Insulation Tensile Strength: 2400 PSI min. (1.69 kg/m²)
NVP: 67%
Temperature Range / Storage & Shipping: -4° to 140°F (-20° to 60°C)
Temperature Range / Installation: 32° to 140°F (0° to 60°C)
Temperature Range / Operation: -4° to 140°F (-20° to 60°C)
Minimum Bending Radius: 4 x the overall diameter
Maximum Pulling Tension: 110 N
Length1640' (500 m)
Packaging Info
Package Weight76 lb
Box Dimensions (LxWxH)12.8 x 11.5 x 11"

  • 4 pairs of 23 AWG solid bare-copper conductors
  • Low-smoke zero-halogen jacket for safety
  • Exceeds Cat 6A specifications for wider bandwidth
  • Sweep frequency up to 650 MHz
  • Overall metal-foil screen with drain wire
  • Internal rip cord for additional protection 
  • Cross filler for reduced crosstalk
  • Sequential markings every meter
  • Fumigated plywood reel
  • Applications include structure cabling for horizontal and building backbone cable, IT, LAN and Ethernet installations, IEEE 802.3ab 1000BASE-T, 1000BASE-TX and legacy speeds, CDDI/ATM/Token Ring, and IEEE 802.3af (PoE) / IEEE 802.3at (PoE+)    

Related Questions and Answers

Q: 1. Will this fit on an apogee mic?

A: yes, the bands adjust in the mic

Q: 2. Will the Ona Prince Street fit Nikon D750 with a 24-70 attached without a tablet or laptop?

A: I would fit perfectly. You can easily add a 70-200mm as well.

Q: 3. Will this bag fit the Nikon D3500 with a telephoto lens attached?

A: If removing the center divider of the Bowery Camera Bag, you can fit a small telephoto lens with attached to the D3500 inside.

Q: 4. Will it fit the AKG Lyra?

A: According to the spec's the Lyra is to small for that pop filter.

Q: 5. Will this work with the Rode NT USB Mini?

A: This would not fit around the microphone due to the stand. Something like this would fit better: https://www.bhphotovideo.com/c/product/1306486-REG/auray_pfny_6_pop_filter_with_gooseneck.html?sts=pi&pim=Y

Q: 6. Will a 12.9 iPad fit in his bag? The phots seem to show and older iPad with a little extra room, but hard to tell if itd be enough.

A: No. An iPad Pro does not fit in the back pocket, but I can be squeezed in the inside of the bag. But I would rather buy a larger bag.

Q: 7. Will this fit an AKG 440?

A: The Auray OMPF-33 will fit side address microphones with diameters from 1.8 to 2.5 .

Q: 8. will this work on a hyperx quadcast mic?

A: This will work for mics up to 65mm in diameter. The HyperX Quadcast microphone is 50mm in diameter, so the Auray OMPF-33 will work with it.

Q: 9. Are the strap/buckles adjustable to accommodate overstuffing ?

A: Yes. By about 1-2 inches. We adjusted them frequently depending on what was in the bag

Q: 10. What is the life expectancy of the elastic bands?

A: Not sure Yet.. but I do notice my bands are stretching some... If they fail... I will just go to a craft store to replace with near type bands, I'm sure for a low cost.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Hosa Technology Cat 6 Ethernet Cable (50')

$179.85 $226.61

Whirlwind Quad Cable (50')

$290.97 $354.98

Products You May Like

Amaran 150c Rgb Led Monolight (white)

$1,077.00 $1,593.96