The MagConnect Universal Module Tripod/Mic Stand Mount from The Joy Factory is designed for a tablet case or enclosure with a flat, smooth surface; allowing it to be used with MagConnect mounts. Using this mount, your tablet may be mounted to most standard tripods and mic stands, including 1/4" - 20 tripods and 1/8" - 27 mic stands. When you are using your tablet on a tripod to take images and video, you can keep it at the right height and angle is ergonomic, and it can be adjusted using the two spherical joints, carbon fiber arm, and a full 360° rotation. This item is protected by a limited one year warranty.

Designed for Cases with a Smooth Finish    Attaches to 1/4" - 20 Tripods    Attaches to 1/8" - 27 Mic Stands    MagConnect Mounting Connector    Flexible with Two Spherical Joints    Full 360° Rotation    Carbon Fiber Arm    3M VHB Self Adhesive

Designed specifically for cases or enclosures with smooth surface finish

MagConnect mounting connector for a quick, secure connection

Highly flexible with two spherical joints for overall 360° rotation

Carbon fiber arm for lightweight strength

Attaches to standard 1/4" - 20 tripod connections & standard 1/8" - 27 mic stands

Related Questions and Answers

Q: 1. can I mount K&M 25530 Boom Arm with Adjustable Counterweight ?

A: Yes, the K&M 25530 Boom Arm with Adjustable Counterweight (B&H # KMXLABACB) can be mounted on the Auray RFMS-580 Reflection Filter Tripod Mic Stand.

Q: 2. This work with sunpack DF3600U?

A: Yes, this will work with your flash.

Q: 3. This work with sunpack DF3600U?

A: Yes it will and it will be easier to manage

Q: 4. will this work with a Blue Yeti? would I need any adapter?

A: Yes, you can mount the Blue Yeti microphone on the Auray RFMS-580 tripod stand. The Yeti has a standard 5/8" mounting thread on the bottom which can be attached to microphone standard or broadcast arm. To keep the mic isolated from noise and vibrations, the manufacturer recommends using the Blue Radius III Shockmount (B&H# BLRADIUS3) to mount the Yeti first, then attaching the shockmount to a mic stand or broadcast arm.

Q: 5. When the strap puts pressure on the binoculars,is it easy to adjust the IPD ?

A: You could but it would be easier to adjust IPD before you "completely" tie it down.

Q: 6. Can this support the MXL RF-100 Reflection Filter?

A: Yes, the Auray RFMS-580 Tripod Stand can be used to support the MXL RF-100 Reflection Filter.

Q: 7. Can I attach lyx pro vri-20 sound absorbing panel to this mic stand?

A: The stand features a 5/8" threaded adapter for attaching a shockmount or mic clip. The VRI-20 does not specify its mount type but it should work with just about any microphone stand. (May require 3/8" thread adapter to work with a speaker stand) Auray AD-5838-B 5/8"-27 Female to 3/8"-16 Male Mic Stand Adapter B&H # AUAD5838B: https://bhpho.to/3cYuzkL 5/8"-27 Female to 3/8"-16 Male Thread Adds Functionality to Your Mic Stand Provides Compatibility with Mic Clips Provides Compatibility with Shockmounts Offers Compatibility with European Clips Knurled Edge for Easy Connections

Q: 8. What is the lowest height adjustment of this stand?

A: Height; 42 to 68" / 106.68 to 172.72 cm Collapsed Size: 35.2" / 89.41 cm

Q: 9. How long are the legs of the tripod?

A: The tripod legs are approximately 18-inches long.

Q: 10. Can this stand support the auray RF-5P-B Reflection Filter (Witch weighs 9.5 pounds)?

A: The RFMS-580 is designed specifically to support heavier reflection filters and can support the weight of the Auray RF-RP-B filter and other similar reflection filters.