Capable of holding any equipment weighing up to 17.6 lb, the BH-07 Ball Head from Tiltall Tripod is well-suited for use with professional DSLR and mirrorless cameras. It comes with a quick release plate for fast operation, which attaches to your gear via a standard 1/4"-20 screw and locks onto the clamp by turning a knob on the side.

With a height of 3.5" and weight of 12 oz, this tripod head offers full 360° panning and a notch on the base for 90° tilting in one direction. A single locking knob is used to adjust tension and position and features friction control for making precise changes to your composition. Two bubble levels are offered, a rectangular one on the side of the base plate and a bull's-eye model built into the clamp knob.

Load Capacity: 17.6 lb    Height: 3.5"    Weight: 12 oz    Quick Release Plate on Screw-Knob Clamp    360° Pan and 90° Tilt    Friction Control    Two Bubble Levels    1/4"-20 Screw for Mounting Gear

• Ball head with a height of 3.5" and weight of 12 oz, comes with quick release plate that goes on screw-knob clamp
• Capable of holding cameras and other equipment as heavy as 17.6 lb, attaches to gear via 1/4"-20 screw
• Full 360° panning range and 90° tilting in one direction
• Single locking knob for position adjustments, offering friction control for precise framing
• Two bubble levels: on the side of the base plate and inside the clamp knob

Related Questions and Answers

Q: 1. I'm wanting to replace an older SBH-100 ball head that is on an Alta Pro 264AT tripod with the newer Arca-Swiss Alta BH-100 head but I wanted to know if I can attach the "three legged thing" (QR-11 LC) L bracket to it without any issues?

A: There should not be any issues. This head has an Arca-Type Compatible Clamp, the QR-11 LC L Bracket has an Arca-Type Compatible Plate. This head and that plate are compatible.

Q: 2. What is the diameter of the base?

A: This head has a base diameter of 2.6 inches / 66mm.

Q: 3. is this compatible with K&F D225C2 carbon fiber tripod?

A: As the Vanguard Alta BH-300 Ball Head has a 3/8"-16 female threaded socket on the base of the ball head, yes, it would be compatible for use on the K&F Concept D225C2 Carbon Fiber Tripod.

Q: 4. Does the safety pin locks the peak design plate?

A: The Peak Design Dual Plate V2 can work with the safety pin on this Vanguard head.

Q: 5. I can't seem to get my plate off because of the screw. Without unscrewing the screw from the bottom how do I depress the screw to release the plate?

A: Tilt the plate slightly upwards from the side that doesnt have the little pin. And when I say the side, the plate slides front to back when the screw is loosened

Q: 6. What is the diameter of the base plate?

A: The Vanguard Alta BH-100 Ball Head has a base diameter of 2.3 inches.

Q: 7. Aside from the increased load capacity, how is this different from the BH-100?

A: The Vanguard Alta BH-300 is stronger, slightly larger in size/base diameter, as well as heavier than the Vanguard BH-100.

Q: 8. Will this ball head work with Arca-Swiss universal quick release plates?

A: The Matthews BH-30 Ball Head has not been tested with all Arca style plates. But the head uses standard Arca Swiss style plates, and should work with most.

Q: 9. Can the ball head accomodate Small rig L plate for Canon R6 ? https://www.bhphotovideo.com/c/product/1583498-REG/smallrig_2976_l_bracket_for_canon_eos.html

A: Yes the SmallRig L bracket will be compatible with the Vanguard Alta BH 300 ballhead.

Q: 10. Will any standard Arca swiss plate fit this tripod?

A: Reported incompatibility of Arca-Swiss components usually centered around a lever activated clamp. Since this one has a knob clamp, you should have no issue.