This Twin Windbubbles from Bubblebee Industries is a set of two beige miniature imitation-fur windscreens that easily fit on lavalier microphones with a diameter of 0.19 to 0.35" (5 to 9mm). The tiny elastic-wire legs make it easy to mount them on the microphones. They can be used to reduce wind noise and vocal plosives in outdoor environments, and are designed to not fall off during use.

Furthermore, these Windbubbles consist of an outer shell of imitation fur and an empty inner core. The air enters the bubble and quickly leaves without harming the microphone. There is no wind hammering on the microphone and no horrible wind sound as it passes right through.

Sanken COS-11 (with metal windscreen)
Countryman EMW
DPA 4060 (without metal windscreen)
Sennheiser MKE 2 (without MZW 2 windshield)

Related Questions and Answers

Q: 1. Will this work on a panasonic GH5?

A: Sorry, I don't know the Panasonic system.

Q: 2. How does it attach to the lens ????

A: screws into the lens like a filter. 46mm and 62mm adapter rings included. If your lens takes a different size, then you will step-up rings.

Q: 3. Is it possible to buy extra diffusers for the Olympus STF-8 flash?

A: Unfortunately, no, it is not. I contacted Olympus America and they state that the diffusers included in the Olympus STF-8 Twin Flash are not available as a separate replacement accessory.

Q: 4. New to flash here. What is the maximum possible camera to subject distance for adequate illumination?

A: Twin flashes are not made for covering great distances. They are mainly made for macro photography, extreme close ups of things such as flowers, bugs, and bugs on flowers. As a rough estimate the Olympus STF-8 Twin flash should be fine in a range up to 8-10 feet at the most. If you are looking for more in a distance range up to 40-50 feet, the Olympus FL-900R would be a better option. Please take a look at the following link: https://bhpho.to/2h05lsh

Q: 5. will Blimp work with Rode NTG1?

A: I wouldnt advise this for the NTG1. This is designed fro the MKH60 which has a larger diameter and is longer. Here are two good options for the NTG1 Rode Blimp System (Item# ROBLIMPR) Rycote Super Shield (Item# RYSSKM) Both of the above options are also far less expensive than the Sennheiser as with the Sennheiser you will still need to add the Grip and the wind muff in order to use this.

Q: 6. I have the OM-D E-M5 MII and I can't get STF-8 to fire during focus bracketing. Is it not compatible or am I missing a setting?

A: You have to change another setting to get it to flash. I had the same problem until I found the answer in the manual. It still took some effort because the manual was not that clear.Under Menu select 2 Advance Camera Shooting Options , Anti-Shock/Silent , Silent Mode Setting , Flash Mode , Allow .It took me a long time to figure this one out. Be sure to set your flash time long enough for the flash to recharge.Good Luck...Doug

Q: 7. Will this Blimp work with the Rode NTG4+?

A: The Sennheiser MZW 60-1 Blimp Windscreen will support the Rode NTG4+ shotgun microphone.

Q: 8. How does it attach to the lens ????

A: Just screw the adaptor ring to the front thread of the lens. 2 adaptors of diameters 46 and 62 mm are included in the package. The dia 46 mm ring fits the Oly 60mm macro lens and the 62 mm ring fits the 12-40mm 2.8 and other lenses of the same diameters. If your lens is a different diameter, you will need a step down ring.

Q: 9. Is this Blimp too Long for the Sennheiser MKE 600 MIc?

A: This blimp would accommodate the Sennheiser MKE 600 shotgun microphone, but would require additional hardware. I would recommend the Rycote Super-Shield Kit for Shotgun Mics (Medium), BH #RYSSKM , which is a complete blimp kit.

Q: 10. Do they have separate hot shoe hook ups, for each light? I would like to use the Really Right stuff bracket.

A: No, they don't have shoes, just the power unit.