Available for download, AmpliTube 4 from IK Multimedia provides amplifier, cabinet, stompbox, and effects-rack emulations for electric guitars and electric basses. In stand-alone mode, this software can also function as an 8-channel DAW with full recording, looping, editing, mixing, and exporting capabilities. Used in any application such as Pro Tools or Logic, the software allows you to process DI'd guitar and bass through simulations of various guitar-related gear-pieces, and thus approximate a more realistic tone.

Essentially, AmbliTube 4 provides you with an emulated pedalboard, a simulated effects loop, a modeled amplifier, a cabinet stage, and an effects rack, all of which are yours to tweak however you see fit. Not only that—you get two sets of the aforementioned items, and you're able to route your signal through each model in any manner you choose; mono chains, stereo setups, and dual stages of amplification are possible, as are creative combinations in practically any assortment you could cobble together.

It is also worth noting that the tools in AmpliTube 4 work well in conjunction with analog synths, electric pianos, drums, and even soft-synths. This software is compatible with Mac and Windows platforms, and will work in VST2, VST3, AU, and AAX formats running at 64-bit.

AmpliTube 4 & AmpliTube Orange    Pedalboard, Effects Loop & Rack FX    Selectable Mic & Mic Room Emulations    5 Amp-Cab Models New to Version 4    8 Orange Amps & 9 Orange Cabinets    Suitable for Studio & Live Performance    8-Channel DAW in Stand-Alone Version    4-Part Midi-Controllable Looper    Stand-Alone, AU, VST2, VST3 & AAX    Mac and Windows Compatibility

The amplifier/cabinet combinations in AmpliTube 4 utilize "Sponge and Sag" processing to replicate, in a more faithful manner, the dynamic interaction between the power amp and the speakers, aiming to eliminate the "harshness" found in the upper frequencies of other software

AmpliTube 4 features an Acoustic Sim pedal that aims to transmute your electric guitar into an acoustic; it is tweakable with on-board controls and features three styles of acoustic body and body-tops

AmpliTube 4 provides an additional slot in the signal chain right after the pre-amp section but before the power stage; this slot lets you add in up to four daisy-chained effects (including all of the stompboxes) for signal processing before hitting the power section

You can use many of the stompbox and rack effects in any of the rack-effects slots; conversely, you can use rack effects in the stompbox slots too

AmpliTube 4 can operate as an 8-channel DAW, allowing you to capture, loop, edit, mix, and export audio in the stand-alone application

Dubbed the Super Looper, this feature is a 4-part looping station suitable for laying down multi-part backing tracks; each track includes level and panning controls, and can be instantiated by MIDI-foot controller or mouse click

AmpliTube 4 features an upgraded tune-section which delivers accuracy down to 0.01 of a cent

Additional software modeled in conjunction with Fender, MESA/Boogie, Ampeg, Orange, Soldano, Groove Tubes, Gallien-Krueger, Jet City Amplification, THD and T-Rex, Fulltone, Z.Vex, Carvin, Morley, Wampler Pedals, Dr. Z, ENGL and more are available for demo and purchase within the plug-in

• Brit 8000 (based on the JCM800)
• Brit 9000 (based on the JCM900)
• Red Pig (based on the Marshall Major)
• Brit Silver (based on the Silver Jubilee) 
• Brit Valve-Pre (based on the JMP-1)

• 3D Room environment emulation
• Select different speaker cabinets from different amps
• Change individual speakers in the same cabinet
• Dual-Mic Placement on any speaker in the cabinet
• 18 microphones can be used in the Cab Room (three standard, 15 available in Custom Shop)
• 29 individual speaker models
• 6 different room scenes
• Cabinet Mixer section to fine-tune and mix all elements

Related Questions and Answers

Q: 1. If the laptop is disconnected from the outlet to the wall but still has battery power, can this transfer that power to a large monitor or tv so that it functions even if there is no outlet (but the laptop is fully charged)?

A: No Monitor consumes too much power.

Q: 2. Can SXDC card, work on this system?

A: This hub only specifies as being capable of SDHC cards.

Q: 3. Does the photography bundle come with the camera cube inside of the bag as it shows on the photos? Cause i've seen another product on the website that shows the cube separated from the bag and it's more expensive.

A: Yes, the Photography bundle comes with the photo cube.

Q: 4. Can a Samsung A51 power this hub?

A: The Samsung A51 is compatible with the EZQuest 8-Port USB Type-C Multimedia Hub Adapter with Power Delivery 3.0 BH #EZX40030 but it will have many limitations since that smartphone only has USB C 2.0 and doesn't support external video output over USB C so I wouldn't recommend it.

Q: 5. Can this bag fit a Sony A7iv, 20-200GMii, 24-70 GM ii f2.8 and a wide angle lens and still use side pocket to get to camera?

A: The WANDRD PRVKE 21L v2 Photo Bundle will work with the side pocket to get to the camera but with the Sony a7IV with the 24-70 GM II 2.8 lens attached and the 70-200 GN=M II lens not attached.

Q: 6. Does this fit a camera with a battery grip?

A: No, it is not deep enough to hold a camera with grip.

Q: 7. This unit gets quite warm. Is this "normal?" Should I be concerned?

A: It is normal for a hub to become warm when you are using it, the aluminum design of the EZQuest 8-Port USB Type-C Multimedia Hub Adapter with Power Delivery 3.0 BH #EZX40030 is designed to do exactly that, dissipate the heat from the chipset outside so it can work properly.

Q: 8. Is it compatible with iPad pro 12.9?

A: Hi and thanks for your interest in our products. Yes, our 8-Port USB-C Multimedia Hub Adapter is compatible with the iPad Pro 12.9. Regards! EZQuest Support!

Q: 9. Does this "Photography Bundle" include: Rainfly, Waist straps, Accessory straps & Camera Cube?

A: Included in this bundle would be the following WANDRD PRVKE 21L Bag with Photo Accessories Kit (Black) Accessory Straps 2.0 Waist Strap Chest Strap Limited Lifetime Warranty

Q: 10. Does the EZQuest X40030 have a true, full performance, Thunderbolt 3 connection? The main description says "Thunderbolt 3 compatible." Is it 40 Gbps?

A: Hi Thanks for your interest in our product, Our X40030 is USB-C 10Gb Hub that is compatible with Thunderbolt 3 but is not 40Gb. Thanks!