The 16 to 32" AtomFLEX Coiled Micro-HDMI to HDMI Cable lets you transmit HDMI 2.0 signals between devices and components. The coiled design reduces clutter, and the die-cast metal micro-HDMI (Type-D) connector provides a stable connection. This cable supports 4K HDR video at up to 60 fps and Full HD video at up to 240 fps.

HDMI 2.0    Supports 4K at 60 fps & HDR    Supports Full HD at 240 fps    Coiled Design Reduces Clutter    Die-Cast Micro-HDMI (Type-D) Connector

Related Questions and Answers

Q: 1. Does this work with the Komodo? Red Komodo states 12G SDI but this has 3G SDI. Not sure if that matters.

A: Atomos Shinobi 7" 4K HDMI/SDI Monitor will work will work with Red Komodo under certain output. Raw outputs is not available.

Q: 2. can i input 4k in hdmi and can get down convert hd from sdi ?

A: The SDI outputs of the Atomos Shinobi 7" 4K HDMI/SDI Monitor would only output in HD since they are 3G SDI outputs. But the Shinobi does support cross conversion. So you could input in 4 via HDMI and output in HD via SDI.

Q: 3. Is WACADTAP21M Watson 2.1mm barrel to D-Tap cable suitable to power this device?

A: No, the DC barrel needs to be a locking barrel. Here are some other options: Atomos D-Tap to DC Barrel Coiled Cable https://www.bhphotovideo.com/c/product/1493127-REG/atomos_atomdtpcb2_d_tap_to_dc_barrel.html?sts=pi&pim=Y Atomos Locking AC Power Adapter for Flame Series Monitor https://www.bhphotovideo.com/c/product/1473479-REG/atomos_atompwr012_locking_ac_power_adaptor.html

Q: 4. can I replace the camera that comes with the Canon c200 with this camera and will it be controllable by the camera like the small one?

A: No. The following unit provides no menu information on the sensor output and will not drive the internal menu.

Q: 5. My Ninja V can be powered using a P-tap to dummy battery adapter, but I see this unit has space for two batteries. Will it power from this same p-tap to single dummy battery adapter as the Ninja V?

A: Yes, you can power the Atomos Shinobi 7 using a single dummy battery.

Q: 6. Is there a Hawk Woods gold mount adapter that will work for this monitor?

A: No, Hawk-Woods did not make a particular plate for the Atomos Shinobi 7" 4K HDMI/SDI Monitor. An alternative route to consider to power the display from a gold mount battery is using a cage, a compatible battery plate, and a D-Tap to 2.1mm barrel connect. For example, the SHAPE Monitor Cage for Atomos Shinobi 7" with the SHAPE Pivoting Battery Plate for Shogun 7 Monitor Cage (Gold Mount) and the Kondor Blue Coiled D-Tap to Locking DC 2.1mm Right-Angle Cable (16 to 50"). See the links below: https://bhpho.to/3AE9aKv https://bhpho.to/3AGOL7t https://bhpho.to/3oPOEUl

Q: 7. Can I use this to monitor photography or is it only made for monitoring video recordings?

A: The Atomos Shinobi 7" 4K HDMI/SDI Monitor can be used to review photos as well. The monitor has an HDMI port for you to connect your camera for viewing your camera's output.

Q: 8. Does this monitor have Arri locating pins on the top and bottom?

A: Yes, the Atomos Shinobi 7" has anti-twist pins on next to the 1/4" 20 threads.

Q: 9. It has "Coax (16.8 VDC) Input". What cable can I use to power it? Is it 2.5mm locking barrel?

A: Yes. The DC input is a locking DC coaxial barrel power input connection. The power adapter is included.

Q: 10. Will it work as a monitor for the BMPCC 6K Pro? Even if it doesn't support 6K resolution, would it still monitor the image?

A: Yes the Atomos Shinobi 7 will work. Even when recording in 6k on the Black Magic Pocket Camera models the output resolution is limited to HD 1080p.