Over The Ear Balanced Headphone List

Spl Pro-fi Series Phonitor X Headphone Amplifier And Preamplifier With Voltair Technology (silver)

Product Code: ga182013
Availability: In Stock

$7,647.00 $10,017.57

Qty

0 reviews Write a review

Description
Reviews (0)

The silver Pro-Fi Series Phonitor x Headphone Amplifier and Preamplifier from SPL offers connections for headphones operated both balanced and unbalanced. It has an advanced built-in dual power amp that drives headphones balanced which is twice the power of the standard 1/4" jack. This tightens the bass response and makes the overall playback even more relaxed and transparent. The front houses a 4-pol XLR connector to connect the balanced headphone. Both the standard and the 4-pol headphone outputs can be used simultaneously.

Phonitor x is not just a headphone amplifier but also a full-fledged stereo preamplifier. There is provision for connecting up to five stereo sources - two in the analog domain offering XLR connectors for a balanced source and RCA connectors for an unbalanced source.

When Phonitor x operates as a preamplifier together with the Performer as power amplifier both units can be wire-linked for simultaneous power on/off. Therefore, both units AMP CTL sockets need to be connected with a 3.5mm mono-jack cable. When switching to headphone, listening the performer can automatically be powered down. To engage this feature set DIP switch #6 on the bottom of the Phonitor x to ON. The Phonitor Matrix delivers the most realistic playback on headphones.

The VOLTAiR 120V Rail Technology is developed and manufactured to run on an operating voltage of 120V, which corresponds to twice that of discrete operational amplifiers and four-times that of semiconductor operational amplifiers. It reproduces finest details and delivers a totally relaxed sounding audio experience. The music sounds natural and hearing fatigue is reduced.

Key Specs
Number of Headphone Channels	Single Channel
Headphone Output Power	1 W per Side into 600 Ohms (Max, 1 kHz) 2 W per Side into 300 Ohms (Max, 1 kHz) 3.7 W per Side into 120 Ohms (Max, 1 kHz) 2.9 W per Side into 47 Ohms (Max, 1 kHz) 2.7 W per Side into 32 Ohms (Max, 1 kHz)
Analog Audio I/O	XLR 3-Pin Balanced Input Stereo RCA Unbalanced Input XLR 4-Pin Balanced Headphone Output 1/4" TRS Unbalanced Headphone Output XLR 3-Pin Balanced Speaker/Line Output Stereo RCA Unbalanced Output
Frequency Response	1/4" Headphone Outputs: 10 Hz to 300 kHz -3 dB XLR Balanced Headphone Outputs: 10 Hz to 300 kHz -3 dB XLR Speaker, Line Outputs: 4 Hz to 300 kHz -3 dB
Parameters
Number of Headphone Channels	Single Channel
Headphone Output Power	1 W per Side into 600 Ohms (Max, 1 kHz) 2 W per Side into 300 Ohms (Max, 1 kHz) 3.7 W per Side into 120 Ohms (Max, 1 kHz) 2.9 W per Side into 47 Ohms (Max, 1 kHz) 2.7 W per Side into 32 Ohms (Max, 1 kHz)
Connectivity
Analog Audio I/O	XLR 3-Pin Balanced Input Stereo RCA Unbalanced Input XLR 4-Pin Balanced Headphone Output 1/4" TRS Unbalanced Headphone Output XLR 3-Pin Balanced Speaker/Line Output Stereo RCA Unbalanced Output
Performance
Frequency Response	1/4" Headphone Outputs: 10 Hz to 300 kHz -3 dB XLR Balanced Headphone Outputs: 10 Hz to 300 kHz -3 dB XLR Speaker, Line Outputs: 4 Hz to 300 kHz -3 dB
Maximum Input Level	+32.5 dBu
Maximum Output Level	+30 dBu
Dynamic Range	XLR Balanced Headphone Outputs: 130.5 dB 1/4" Headphone Outputs: 135.5 dB XLR Speaker/Line Outputs: 136.3 dB
Impedance	XLR Inputs: 20 Kilohms RCA Inputs: 10 Kilohms 1/4" Headphone Inputs: 0.18 Ohms XLR Balanced Headphone Inputs: 0.36 Ohms
THD+N	Headphone Outputs: 0.00091% (at 0 dBu, 1 kHz, 100-Kilohm Load) XLR Speaker/Line Outputs: 0.00085% (at 0 dBu, 1 kHz, 100-Kilohm Load)
Noise	XLR Balanced Headphone Outputs: -98 dBu (A-Weighted) 1/4" Headphone Outputs: -103 dB (A-Weighted) XLR Speaker/Line Outputs: -103.8 dB (A-Weighted)
CMRR	XLR Inputs: -82 dBu (1 kHz)
Crosstalk	XLR Balanced Headphone Outputs: -90 dB (1 kHz) 1/4" Headphone Outputs: -90 dB (1 kHz) XLR Speaker/Line Outputs: -106 dB (1 kHz)
Damping Factor	Balanced Headphone Outputs: 180 at 40 Ohms Headphone Outputs: 180 at 40 Ohms
Power
AC Input Power	User Selectable: 115 VAC, 60 Hz (T 1 A 250 V) 230 VAC, 50 Hz (T 500 mA 250 V)
Power Consumption	40 VA (Maximum) 0.7 W (Standby)
Physical
Dimensions	11 x 11.2 x 2.2" / 33.5 x 28 x 5.6 cm (with Feet)
Weight	9.5 lb / 4.3 kg

120V rail headphone amplifier and preamplifier

Separate connections and power amplifiers for headphone driven balanced and unbalanced

Suited for all headphones with impedance >10 Ohms

Balanced and unbalanced analog inputs (XLR and RCA)

Balanced and unbalanced analog outputs (XLR and RCA)

With Phonitor matrix speaker-equivalent listening on headphones

Balance control

Mono switch function

Volume remotely adjustable (sold separately)

AMP CTR connection with Performer power amplifier for coupled On/Off switching

Standby/power on switch

Linear power supply with toroidal transformer

Related Questions and Answers

Q: 1. Does the amp connect wirelessly to a Yamaha Aventage receiver so i can add it as a zone 2 for music?

A: It would require a wired connection from the pre-out to your Yamaha. This wouldn't act as a zone 2 but as source of music for the zone 2 that your existing Yamaha has.

Q: 2. How does it attach to fixture?

A: It has velcro type attachements.

Q: 3. are are there 10 ft cable?

A: No the size are only 2 inches long if you want one in 10ft there i think there's a 6ft type from Razer

Q: 4. Will this receive audio files from my iPad via wifi? I don't want to use bluetooth..

A: Yes, Ann L, it will. The WXC-50DS has wi-fi and Airplay as well.

Q: 5. Does this collapse flat? If so, will it fit in case that dracast provides with the 1500 series

A: Yes, this softbox does collapse flat and would fit in the same case as the LED 1500 panel.

Q: 6. Can multiple devices be linked together to play synchronized audio from a single source?

A: No they cannot.

Q: 7. does this unit (PP444)come with power transfer for $13.78?

A: Yes

Q: 8. Wil the AKG K533 mkII fit?

A: The AKG K553 MKII will fit in the SLAPPA HardBody Pro Full-Sized Headphone Case.

Q: 9. Looking for a way to have speakers plugged into my laptop...but not directly connected. Blue tooth speakers are out for power reason. So want to connect between laptop and receiver. Is this what this does?

A: Yes, you can either connect to the WXC-50 with Bluetooth or wifi (on same network) from the laptop and then output to your receiver using output jacks (RCA type) or optical link. The WXC-50 also enables you to access many streaming music / internet radio sources directly.

Q: 10. My husband is recording football games from the announcers booth. The 2x tele lens isn't quite enough and the 300mm is too much. Is there a lens you would recommend? He is using an iPad Pro 12.9 inch.

A: Unfortunately there is nothing that is mid ground between these two lenses.

There are no reviews for this product.