This 100-sheet pack of 17 x 22" PremierArt Deluxe Presentation Matte Paper from Premier Imaging is compatible with both dye and pigment printers, is acid and lignin free, and offers excellent water resistance. The single-sided paper has a 12-mil thickness and is a low-cost alternative for art and photographic printing.

Alpha Cellulous    Basic Weigh: 230 gsm    Thickness: 12 mil    Alkaline Buffered    Acid and Lignin Free    Water Resistant    High D-Max    Hot Press Surface

Proofing, fine art photography, giclee reproduction, portrait photography, wedding photography, and scrapbooking

Related Questions and Answers

Q: 1. Does all the film come in a single bag, or are there multiple bags inside of the box of 100?

A: Four bags x 25 sheets each.

Q: 2. Can this be used for historical process Gum Bichromate ?

A: Yup......

Q: 3. What's the main difference between Lasal Matte and Entrada Matte? Which would work better for prints mounted to greeting cards? Need a soft velvet matte finish.

A: The Entrada paper is thicker, 15.5mil. If you are mounting the paper to greeting cards, the thinner Lasal would probably be fine. As far as which one looks better would be a matter of opinion and might vary depending on the image too.

Q: 4. What is the grain direction on the 13x19 paper, GS or GL?

A: According to Moab, unfortunately they produce all of their sheet paper in either GS or GL based on lot number. Due to our large inventory, we cannot confirm the ones we test will be the ones you receive. Moab's website says "Depending on the converting yields, we cut our sheets in both short and long grain configurations and record the grain direction in the lot numbers with either a GL or GS for 'grain long' or 'grain short' respectively." They mention contacting Moab directly for specific projects that require grain direction for information on specific batches of paper.

Q: 5. what grain is this cut to?

A: Good question. Each box is coded with the grain direction by either a 'GS' for Grain Short - or 'GL' for Grain Long within the lot number that is printed on the back side of the box on the label. The lot number will be a series of letters and numbers stamped on the label. The GS or GL indicates grain direction.

Q: 6. Does it come with Tripod mounting adaptor ? if not what adaptor is suitable for this scope?

A: It comes with a standard 1/4-20 threaded mount and a larger thread probably 5/16. I have never used the larger mount so not sure. main comment-make sure tripod is VERY rigid.

Q: 7. can 2 prints be put into each pocket?

A: Yes, you can put two prints in each pocket.

Q: 8. What do I need to attach a Nikon D5100 to a Celestron Ultima 100 or 80?

A: sorry I can't help you

Q: 9. is this film compatible with the colorburst 50 kodak instant film camera?

A: Dear Rachel, The short answer is unfortunately no. While I am wholly uncertain what size instant film your Colorburst 50 camera was designed to expose, I can definitively say that Kodak Ektar 4 x 5, or any other size negative sheet film, will not work as intended in your camera. Kodak Ektar is a relatively new color-negative film available in 35mm and 120 rolls, also 4 x 5 inch and 8 x 10 inch sheets. This wonderful film is normally loaded into sheet film holders in total darkness then placed into the back of a large-format camera; once the image has been composed on it's ground glass and all camera/lens adjustments have been made. After pulling the film holders' dark slide and letting the shutter rip, the holder with it's film is then taken back to the darkness to be processed in C-41 chemistry or the film alone sent off for this leg of the magic act to be wielded by other hands or a machine processor. When this film has been properly handled, loaded, unloaded and even acceptably exposed and processed, you arrive at a usable color negative. I suspect that in the digital world this color film is most often scanned to become very large digital files/positives, as it may have been designed with scanning in mind. While contact prints can be made to the same size of any negative film used, in a traditional darkroom, both color and black & white negative films are normally held in a negative carrier which is placed underneath the light source of a photo enlarger and projected optically onto photographic enlarging paper. The paper is then developed/processed in a why not too dissimilar than that of film. That is, you go from darkness to dim safelight, make use of chemical solutions requiring a somewhat exact combination of dilution, temperature, time, and agitation, to a paper development also with chemicals but allowing for a less stringent course with respect to those variables while giving the same amount of attention to paper exposure as you did with film exposure. Sorry about the long answer but I wouldn't want to discourage anyone investigating the use of film by just saying - good luck with that. Also, forgive me if I've wrongly assumed that you're unfamiliar with basic film/darkroom procedures. The question you asked made me think that you may be new to the use of film, 4 x 5 at that! That's a good thing in my view as I have never stopped using film and Kodak sure doesn't make it or discontinue it based on my use alone. (Hey look at that! Mark just bought another box of film, time to start another batch.) Perhaps you asked the question because you already have a box of 4 x 5 Ektar and a 30 year old instant film camera. In that case, go ahead and experiment if you're able to fit a sheet into the back of your camera. Keep in mind that it must be done in complete darkness and the camera back must also be light-tight. At this point you would be well within the realm of experimentation, though, without a darkroom, you are left with sending it out to be processed. I'm not sure but I think the going rate is around $3.00 a sheet. Truth is, you could expose this film and most other sheet films with something as simple as a pinhole camera made from a shoe box and a pie tin but this is not the norm. 4 x 5 negative film has been a widely available standard size film for over 100 years and the new Ektar 4 x 5 will fit into any new or 100 year old 4 x 5 film holder and those holders will work in just about any 4 x 5 large format film camera ever produced (millions) but I'm afraid the film and camera combination you mention are not a proper pairing. If in fact tangible instant photos are what you're after rather then knowing if the Colorburst 50 will work to expose large-format film, well, as explained above, Kodak Ektar 4 x 5 is anything but instantaneous. Funny, I just googled the Colorburst 50 and Fuji's FP-100c film popped up.It's a 3 X 4 inch 100 speed daylight balanced color instant film. In stock at B&H, 10 shots/instant prints for $20.00 Wish I were knowledgeable enough about your camera and this film to say if it will or will not work but if instant is what you want and you somehow haven't seen this film already, maybe you could look into that further. I hope you find a solution and continue to buy film.Have a good day,Mark

Q: 10. When is the expiration date?

A: The expiration date of the Kodak 8 x 10" Ektar 100 Color Negative (Print) Film (10 Sheets) (B&H# KOE10081010) will vary according to the most current stock. Having said that, if it's close-dated (e.g. within a few months) then we will let you know on the product page. Typically, we see it dated ahead six months or more.